fj THE UNITED STATES STRATEGIC BOMBING SURVEY The Effects of The Atomic Bomb __ QN Hiroshima, Japan Volume III Physical Damage Division May 1947 THE UNITED STATES STRATEGIC BOMBING SURVEY The Effects of The Atomic Bomb on Hiroshima, Japan Volume III Physical Damage Division Dates of Survey: 14 October - 26 November 1943 Date of Publication May 1947 This report was written primarily for the use of the United States Strategic Bombing Survey in the preparation of further reports of a more comprehensive nature. Any conclusions or opinions expressed in this report must be con- sidered as limited to the specific material covered and as subject to further interpretation in the light of further studies conducted by the Survey. This document contains information affecting the national defense of the United States within the meaning of the Espionage Act (50 IT, S. C. 31 and 32), as amended. Its transmission or the revelation of its contents in any manner to an unauthorized person is prohibited by law. This report will not be reproduced in whole or in part or distributed to any agency or person other than those to whom original distribution is made without the approval of The Director of Central Intelligence, Washington, D. C. ii FOREWORD The United States Strategic Bombing Survey was established by the Secretary of War on 3 November 1944, pursuant to a directive from the late President Roosevelt. Its mission was to conduct an impartial and expert study of the effects of our aerial attack on Germany, to be used in connection with air attacks on Japan and to establish a basis for evaluating the importance and potentialities of air power as an instrument of military strategy for planning the future develop- ment of the United States armed forces, and for determining future economic policies with respect to the national defense. A summary report and some 200 supporting reports containing the findings of the Survey in Germany have been published. On 15 August 1945, President Truman requested that the Survey conduct a similar study of the effects of all types of air attack in the war against Japan, submitting reports in duplicate to the Secretary of War and to the Secretary of the Navy. The officers of the Survey during its Japanese phase were: Franklin D’Olier, Chairman. Paul H. Nitze, Henry C. Alexander, Vice Chairmen. Harry L. Bowman, J. Kenneth Galbraith, Rensis Likert, Frank A. McNamee, Jr., Fred Sear Is, Jr., Monroe E. Spaght, Dr. Lew is R. Thompson, Theodore P. Wright, directors. Walter Wilds, Secretary. The Survey’s complement provided for 300 civilians, 350 officers, and 500 enlisted men. The military segment of the organization was drawn from the Army to the extent of (»0 percent, and from the Navy to the extent of 40 percent. Both the Army and the Navy gave the Survey all possi- ble assistance in furnishing men, supplies, trans- port, and information. The Survey operated from headquarters established in Tokyo early in September 1945, with subheadquarters in Nagoya, Osaka, Hiroshima, and Nagasaki, and with mobile teams operating in other parts of Japan, the islands of the Pacific, and the Asiatic mainland. It was possible to reconstruct much of wartime Japanese military planning and execution, engage- ment by engagement, and campaign by campaign, and to secure reasonably accurate statistics on Japan’s economy and war production, plant by plant, and industry by industry. In addition, studies were conducted on Japan’s over-all stra- tegic plans and the background of her entry into the war, the internal discussions and negotiations leading to her acceptance of unconditional sur- render, the course of health and morale among the civilian population, the effectiveness of the Japanese civilian-defense organization, and the effects of the atomic bombs. Separate reports will be issued covering each phase of the study. The Survey interrogated more than 700 Japa- nese military, government, and industrial officials. It also recovered and translated many documents which not only have been useful to the Survey, but also will furnish data valuable for other studies. Arrangements have been made to turn over the Survey’s files to the Central Intelligence Group, through which they will be available for further examination and distribution. iii IV TABLE OF CONTENTS Page Reference tables 1 Section XI. Damage to machine tools 3 XII. Damage to bridges _ _ _ 28 XIII. Damage to services and utilities 145 Part A. Electric railway and bus system _ _ __ 146 B. Government railroad system _ 170 C. Electric generating and distribution system _ _ 188 D. Telephone communications system _ 212 E. Water supply system _ __ 226 F. Sanitary and storm sewer system _ 268 G. Domestic gas system _ . 287 XIV. Damage to stacks __ _ __ 307 XV. Photo interpretation _ . 322 V REFERENCE TABLES TYPES OF DAMAGE Damage to Buildings, Industrial and Domestic a. Structural.—Damage to principal load-carry- ing members (trusses, beams, columns, load-bear- ing walls, floor slabs in multistory buildings) re- quiring replacement or external support during repairs. Light members such as purlins and raft- ers are not included. h. Superficial.—Damage to purlins and other light members stripping of roofing and non-load- bearing exterior walls. Damage to glass and in- terior partitions not included. Damage to Machinery, Utilities and Equipment a. Total.—Not worth repair. h. Heavy.—Requiring repair beyond capacity of normal maintenance staff; usually returned to manufacturer. c. Slight.—requiring repair within capacity of normal maintenance staff. Damage to Contents Other than Machinery and Equipment a. Total.—Not usable. h. Other.—Usable if reprocessed or repaired. Table A.—Building types or classifications [Tables A and B from Joint Target Group] Group Type symbol Description A. Single-story, no traveling cranes, spans generally less than 75 feet, heights at eaves generally less than 25 feet, area of 10,000 square feet or more. 1. With saw-tooth roofs __ Al.l A1.2 A1.3 A1.4 All buildings of this group with saw-tooth roofs other than those included in types A 1.2, A 1.3, and A 1.4. Frame and roof slab of monolithic reinforced concrete. Exposed top chords of trusses. Stressed-skin type of reinforced concrete (e. g., Zeiss Dvwidag). 2. Without saw-tooth roofs. A2.1 A2.2 A2.3 A2.4 A2.5 Simple beam and column. Arches and rigid frames. Truss construction. Frame and roof slab of monolithic reinforced concrete. Stressed-skin tvpe including concrete shell. B. Single-story with traveling 1. Buildings housing B1 Buildings containing runways for heavy cranes cranes; any length of span; area of 10,000 square feet heavy cranes. (capacitv 25 tons or more); height at eaves generally more than 30 feet. or more. 2. Buildings housing light cranes. B2 All buildings in this group other than those in BI. C. Single-story; no traveling crane runways; spans great- er than 75 feet; height at eaves generally greater than 25 feet; area of 10,000 square feet or more. 1. Main frame members in two directions. Cl.l Cl.2 Cl.3 Cl.4 Roof trusses supported along one side of building by long span trusses and along other side by columns. Permits large door along one side and at ends. Continuous trusses in one or two directions; long span in one direction, supported by columns or exterior walls and by internal columns. Exposed chord saw-tooth roof buildings; exposed chord trusses supporting major size trusses at 90°. One or both truss systems may be of long span. Diamond mesh arch. 2. Main frame members in one direction only. C2.1 C2.2 C2.3 Long-span arches, individually supported along sides of building. May be arranged in multi- ple spans joined along side. Long-span, triangular or bowstring trusses, indi- vidually supported by columns at sides of building. May be arranged in multiple spans joined along side, using common columns. Roof pitch exceeds 2 in 10. Long-span trusses, top cord of pitch 2 in 10 or less, including exposed cord saw-tooth roofs, individually supported by columns along sides of building. May be arranged in multiple spans using common columns or may be con- tinuous over internal columns. 3. Shell-type construc- tion. C3 Stressed-skin including concrete shell construc- tion. 1 Tacle A.—Building types or classifications—Continued [Tables A and B from Joint Target Group] Group Type symbol Description D. All single-story buildings of less than 10,000 square feet plan area. E. Multistory frame buildings D This type covers all single-story industrial buildings, regardless of type of construction if under 10,000 square feet in plan area. Earthquake-resistant; extremely heavy steel re- inforced-concrete, multistory construction, de- signed to resist heavy lateral loads. Structures in this group other than those in El. Earthquake-resistant, wall-bearing construction (wralls of brick reinforced concrete, or very massive masonry). Structures in this group other than those in FI. Coke ovens, test cells, fuel storage, boilers in power plants, etc. El F. Multistory, wall-bearing build- ings (may have internal columns). S. Special structures E2 FI F2 s HE vulner- ability class Substructural groups (Symbols refer to Table A) HE vulner- ability class Substructural groups (Symbols refer to Table A) VI El. V4 All, A1.2. A1.3, A2.1, A2.2, A2.3, A2.4, D. V2 Bl, B2. V4A_ Cl.2, Cl.3, Cl.4, C2.3. V3 .... E2, FI. V5 A 1.4. A2,5, CI.1, C2.1, C2.2, C3. V3A F2. Ta ble B.—HE vulnerability classes FIRE CLASSIFICATION—BUILDINGS AND CONTENTS C—Combustible: Buildings whose roofs and/or walls are constructed of combustible material. The floors (except the ground floor) are required to be of similar construc- tion. Wood-frame buildings with noncom- bustible sheeting on roof and/or walls are also included in “combustible” class. N Noncombustible: Buildings which have no significant amount of combustible material in the structure, but whose structure is susceptible to damage by fire in the con- tents. An example of this type is a build- ing with exposed steel members which may be warped irreparably by the heat of a fire. Roofs of this type are corrugated asbestos corrugated iron, pre-cast or pour-in-place cement or gypsum on exposed steel and reinforced concrete 2%-inches thick or less. R—F 'ire-resistive: Buildings which have no signi- ficant amount of combustible material in the structure and which will withstand all but the most intense fire without structural damage. Roofs and floors (other than ground) should be of concrete more than thick, and the steel frame should be protected and not subject to ordinary fire damage. C and N, N and R or C and R used where above types arc combined in a single fire division. 2 SECTION XI DAMAGE TO MACHINE TOOLS Page Object of study 4 Summary 4 General 5 Analysis of damage 5 Machine tools in wood-frame buildings 7 Machine tool damage in steel-frame buildings ' 7 Machine tools in load-bearing, brick-wall buildings _ 10 Mean areas of effectiveness 10 Conclusions and recommendations 11 Photos 1- 23, inclusive. Figures 1-3, inclusive. Table 1. 3 ing frames. Fire was the principal cause of seri- ous damage to machine tools in wood-frame buildings. Seven of the 11 buildings were burned and all their machine tools were seriously damaged. Serious damage by fire resulted because of the com- bustibility of the buildings and their contents, and the congested areas in which they were located. d. Steel-Frame Buildings. Debris caused no serious damage to machine tools in steel-frame buildings although 42 percent of the total floor area was structurally damaged by blast because the blast caused mass distortion of the steel frames without tearing loose heavy structural members; moreover, wall and roof sheathing debris was light. Fire was the only cause of serious damage to machine tools in five steel-frame building, four of which were combustible. Three buildings were burned out and all their machine tools were seriously dam- aged because of the combustibility of building materials and contents and the congested areas in which the buildings were located. e. Load-Bearing, Brich-Wall Buildings. Debris caused serious damage to only 5 percent of the ma- chine tools in load-bearing, brick-wall buildings although 30 percent of the total floor area was structurally damaged. Two of the buildings sus- tained structural damage, but serious damage to machine tools occurred in only one because, by chance, there were no machine tools near the brick wall which was collapsed inward. One of the thi ■ee load-bearing, brick-wall buildings was burned out and all its machine tools were seriously damaged because of the combustibility of building materials and contents and the congested area in which the building was located. f. Weather Exposure. Exposure to weather caused slight damage to machine tools in buildings which were blast damaged but had no fire, and in- creased the degree of damage to machines which had already sustained heavy damage by fire. Rusting apparently was more severe on fire-dam- aged machine tools because all lubricants and paint had been burned off. g. Mean Areas of Effectiveness (MAE). The number of machine tools in various types of build- ings in the blast-affected area was much too small to permit calculation of reliable MAE’s (Mean areas of effectiveness) for serious damage by blast and debris. The MAE for serious damage to machine tools by fire in combustible buildings was virtually the 4.4-square-mile, burned-over area of the city. 1. Object of Study The object of this machine tool study was (o determine the extent of, and to analyze the factors involved in, the damage to machine tools by blast, debris, fire, and exposure to weather resulting from the explosion of the atomic bomb in Hiro- shima on 6 August 1945. 2. Summary a. General. The major industrial plants of Hiroshima were located about iy2 miles from the heart of the city and no damage was done to ma- chine tools in them. Numerous small engineering shops, principally light ones containing two to forty machine tools, were located within the area seriously affected by blast and fire. Although the number was small, all machine tools within 3,500 feet of ground zero (GZ) were seriously damaged, principally by fire. Except in four unburned shops, all machine tools throughout the 4.4-square- mile, burned-over area were seriously damaged by fire after sustaining not more than 15 percent seri- ous damage by debris. Serious damage to ma- chine tools in excess of 15 percent was caused by debris in only one unburned shop, which was within the burned-over area. Debris and weather caused only slight damage to machine tools out- side the burned-over area. h. Scope of Report. Machine tools in 19 one- story buildings (11 wood-frame, 5 steel-frame, and 3 load-bearing, brick-wall structures), all of which were combustible except one, were included in this study. There were no multistory or rein- forced-concrete machine shop buildings. Four of the 19 buildings were outside the burned-over area and were unburned, but were within 7,600 feet of GZ. Fifteen of the buildings sustained structural damage, mainly 100 percent. The high-explosives vulnerability of all buildings was V4 (reference tables). c. Wood-Frame Buildings. Debris caused total or heavy damage to only 3 percent of the machine tools in wood-frame buildings although 64 percent of the total floor area was structurally damaged by blast. Wood-frame buildings which were col- lapsed by blast apparently fell as units with ap- preciable lateral motion, and as a result compara- tively few machine tools were seriously damaged by debris. Serious damage by debris resulted mainly from overhead shafting and pulleys crash- ing down. A few machines were slightly damaged when overturned by mass movement of the build- 4 h. Poor target. The central portion of Hiro- shima was a poor target for the atomic bomb from the standpoint of damage to machine tools because all large industrial plants were located on the outskirts. i. Blast Versus Fire and Structural Damage. The total amount of serious damage to machine tools by blast and debris was small compared to serious damage by fire, and also compared to the structural damage by blast to the buildings in which they were housed. j. Damage hy Fire. Serious damage to machine tools by fire was primarily a result of the com- bustibility of the buildings in which they were housed. It is doubtful that fire would have caused serious damage generally to machine tools in mod- ern noncombustible or fire-resistive buildings, of which there were none housing machines in the burned-over area. k. No Blast Walls. There were no special walls around machine tools for protection against frag- mentation, debris, and blast effects of high-explo- sive bombs. l. Suppositions. The atomic bomb made no crater and evidently caused no earth shock. If an atomic bomb were detonated on or very near the ground, it is believed that all exposed precision machine tools within several hundred feet in all directions from the point of detonatioin would be totally or heavily damaged by the combined effects of cratering, earth shock, blast debris, and intense heat. m. Protective Measures. The blast and debris hazard to machine tools can be most effectively limited by installing them in reinforced-concrete buildings of adequate strength and design to with- stand the blast pressures of an atomic bomb, or by placing them in underground structures. Another alternative would be to install machine tools in steel-frame structures sheathed with a frangible material such as thin corrugated asbestos. The fire hazard to machine tools can be effectively limited by installing them in fire-resistive or non- combustible buildings containing a minimum of combustible contents. Most of the weather dam- age to machine tools could have been prevented by greasing or otherwise protecting them within the first few days after the atomic-bomb attack. 3. General The major industries of Hiroshima were located on the south and southeastern outskirts of the city about 1*4 miles from ground zero (GZ). The buildings themselves were practically unaffected by the atomic bomb which detonated over the heart of the city, and no damage was done to machine tools in them. Located within the area seriously affected by blast and fire were numerous small, light engineering shops and a few small, heavy engineering shops containing 2 to 40 machine tools. These small shops were engaged in the manufac- ture of products such as shell cases, fuses, pumps, gauges, gears, and torpedo parts. With few ex- ceptions the plants were producing for the mili- tary. The machine tools were principally lathes, drill presses, shapers, and boring, grinding, shear- ing, pressing, and stamping machines. 4. Analysis of Damage Machine tools in 19 one-story buildings, loca- tions of which are shown on Figure 1, were in- cluded in this study. Eleven of the buildings were wood-frame (Photos 1-13), five were steel- frame (Photos 14—19), and three were load- bearing, brick-wall structures (Photos 20-23). All wood-frame machine shops which were within the blast-affected area and not burned and a few typical wood-frame machine shops which were burned were included in the study. All steel- frame and load-bearing, brick-wall buildings con- taining machine tools in the blast-affected area were included in the study whether burned or not. There were no multi-story or reinforced-concrete buildings containing machine tools. All the buildings housing machine tools were combustible except one steel-frame corrugated-iron-sheathed building. Four of the nineteen buildings were outside the 4.4-square-mile burned-over area and were unburned, but were within 7,600 feet of GZ. An additional four buildings which were within the burned-over area were unburned. Twelve of the buildings sustained 100 percent structural dam- age, three sustained 18, 47, and 77 percent struc- tural damage, respectively, and four sustained none. All machine-tool data have been listed in Table 1 and summarized graphically in Figure 2, including data on the buildings in which the ma- chine tools were housed. Damage to machine tools has been classified in three categories; (1) total damage (TD)—damage which caused scrapping; (2) heavy damage (HD)—damage which could not be repaired by the normal maintenance staff; and (3) slight damage (SD)—damage which could be repaired by the normal maintenance staff. Damage to machine tools was caused by debris, fire, or subsequent exposure to weather. No instances 5 Build- ing Grid Dis- trict from AZ (feet) Dis- trict from GZ (feet)- Occupancy Plan area (square feet) Sto- ries Building type Build- ing HE-V Build- ing flre-V Building damage- -Percent Machine tool damage— -Percent Structural Superficial Debris Fire Weather All causes Blast Fire Mixed Blast Fire TD HD SD TD HD SD TD HD SD T D and HD A 40 2.600 1,600 Light engineering 1,200 i Wood-frame V4 C 100 0 0 0 0 15 0 10 70 15 0- 0 0 0 100 B 40 4 000 3 400 1,500 1 V4 C 100 0 0 0 0 0 10 5 60 30 o o o o 100 c 30 4,400 4,000 9. 500 i do V4 C NF 23 0 0 20 0 0 80 o 1) 30 4, 500 4 100 2.400 i do V4 C 100 0 0 0 0 0 5 5 90 5 0 o o o 100 E 60 5 100 4 700 2.000 i do V4 C 100 0 0 0 0 0 0 15 65 35 0 o o o 100 F 6H 5 300 4 900 1,500 i V4 C 100 0 0 0 0 0 0 10 80 20 0 0 o o 100 o 70 6 300 6 000 3,200 i do V4 C 100 NF 0 0 0 10 0 o 10 (I II 61 6, 800 6 500 do 3,500 i do V4 C 100 0 0 0 0 0 15 5 65 20 0 0 o o 100 ,T 7H 7, 800 7 500 do 3, 200 i do V4 C 0 NF 100 0 0 0 0 0 25 o K 7H 7. 900 7 600 5,100 i do V4 C 0 NF 0 0 0 0 0 0 0 o 4K 9, 200 9, 000 2, 500 i do V4 C 0 100 0 0 0 0 0 0 75 25 0 0 () 0 100 M 40 2, 500 1 500 2, 200 i Steel-frame V4 C 100 0 0 0 0 0 0 20 80 20 0 0 () 0 100 . N 5H 2, 700 1 800 do . - 1,300 i do V4 N 100 0 0 0 0 0 0 0 0 100 0 0 0 0 100 F 40 3 900 3 300 2.600 i do V4 C 0 0 0 100 0 0 0 0 40 60 0 0 0 0 100 Q 4F 5, 100 4 700 5, 900 i do V4 C 18 NF 82 0 0 0 0 0 100 o K 4F 5,100 4, 700 9, 300 i do V4 c 47 NF 53 0 0 0 0 0 100 0 S 40 3,900 3. 300 Light engineering ___ 7,000 i Brick, load-bearing V4 c 100 0 0 0 0 0 0 15 50 50 0 0 0 0 100 steel-truss. '1' 4F 4,400 4. 000 do 2, 300 i do V4 c 100 NF 0 50 25 0 0 0 25 u 5J 7. 800 7 500 21,400 i do V4 c 0 NF 0 0 0 0 0 0 20 o AZ —Air zero; QZ —Ground zero; HE-V—High explosives vulnerability; TD—Total damage; HD—Heavy damage; SD- -Slight damage; NF— No Are. Table I.—Machine toot data 6 HIROSHIMA MACHINE TOOL LOCATIONS BUILDING GRID BUILDING GRID A 46 L 4 K B 4 G M 4 G C 3 G N 5 H D 3G P 4G E 6G Q 4F F 6H R 4F G 7G S 4G H 61 I 4F J 7H U 5 J K 7H HIROSHIMA HIROSHIMA PREFECTURE, HONSHU, JAPAN CONTOUR INTERVAL 20 METERS GRID SYSTEM BASED ON 1000 YARD WORLD POLYCONIC GRID SECRET U S. STRATEGIC BOMBING SURVEY MACHINE TOOL LOCATIONS HIROSHIMA, JAPAN FIGURE I-XL 7S*000 YARDS 731568 O - 47 (Face p. 6) of di rect damage by blast were observed, although a few cases of slight damage were attributable to displacement of overhead shafting and belting. In Table 1, all damage attributable to debris has been recorded, but damage caused by subsequent fire and weather effects has been recorded only when the damage was more severe than the cate- gory of damage by debris. For example, when machines which were heavily damaged by debris were subsequently heavily damaged by fire, but not totally damaged, the damage was tabulated in the heavy-damage-by-debris category; and when ma- chines which were heavily damaged by fire were subsequently slightly or heavily damaged by ex- posure to weather, the damage was tabulated in the heavy-damage-by-fire category. The high-explo- sive vulnerability of all buildings was V4 (refer- ence tables) since all were one-story, shed-type structures and the area of each, with the exception of one, was less than 10,000 square feet. The rela- tionship between machine-tool damage and build- ing structural and fire damage is summarized graphically in Figure 3. 5. Machine Tools in Wood-Frame Buildings a. Debris. Debris caused only a small amount of total or heavy damage to machine tools in wood- frame buildings. Although 7 of the 11 wood- frame buildings were 100 percent and 1 was 77 percent structurally damaged by blast, only 5 to 15 percent of the machine tools in 4 of these buildings were seriously damaged by debris. The apparent reason for the small amount of debris damage to machine tools was that, except close to GZ, the blast collapsed wood-frame buildings prac- tically as units with lateral motion because of the instantaneous equal pressure exerted against the ent ire side facing the blast. As a result, the debris did not crash down hard but tended to slide across the tops of machines instead (Photos 4, 9, and 11). Serious damage which was caused by debris re- sulted mainly from heavy overhead shafting and pulleys striking the machines (Photos 1, 2, 5, and 8). A few machines were partly or completely overturned by mass movement of the buildings (sometimes possibly assisted by the belts from overhead pulleys which moved with the building frame), but only slight damage was done to a few machines (Photos 2, (5, and 10). Sixty-four per- cent of the total floor area of the wood-frame buildings was structurally damaged by blast as compared to only about 3 percent serious damage to machine tools by debris, although total serious damage to machine tools by all causes was 41 per- cent (Fig. 3). b. Fire. Fire was the principal cause of serious damage to machine tools in wood-frame buildings, accounting for 38 percent of the total number (Fig. 3). Seven of the 11 buildings studied were completely burned, ami all of their machine tools were seriously damaged ( Photos 1, 2, 5, 6, 7, 8, and 13). As shown in Figure 3, the total percent of machine tools seriously damaged (41 percent) was equal to the percent of the total floor area burned. Although 3 percent of the machine tools were totally or heavily damaged by debris, subsequent fire also damaged them, increasing the degree of damage. All machine tools in wood-frame build- ings which burned sustained serious damage be- cause, in addition to the frame, most floors and wall and roof sheathing were combustible, roof heights were generally low, and in most cases the walls or roofs were partly or completely collapsed placing the combustible debris close to the con- tents. In addition, the buildings had some com- bustible contents and were located in congested, combustible areas where all surrounding buildings burned, causing a generally high temperature in the area. c. Weath er. Most machine tools in structurally damaged and some in superficially damaged wood- frame buildings were exposed to the elements and in most cases no attempt was made to protect them, except that a few machines were protected with grease or sheets of corrugated iron (Photos 9 to 11). Rusting apparently was more severe on ma- chine tools which had been exposed to fire, prob- ably because all lubricants and paint had been burned off. Exposure to weather increased the degree of heavy damage to machine tools in burned buildings, and caused slight damage in blast- damaged buildings. 6. Machine Tool Damage in Steel-Frame Buildings a. Debris. Debris was not the cause of total or heavy damage to machine tools in steel-frame buildings, although 2 of the 5 buildings of this type sustained 100 percent and two sustained 18 and 47 percent structural damage, respectively- The other building had light corrugated-asbestos wall sheath- ing which crumbled under the blast, and the steel frame was only superficially damaged although it was only 3,300 feet from GZ (Photo 17). There was no serious damage to machine tools in struc- turally damaged buildings because the blast caused 7 U S. STRATEGIC BOMBING SURVEY SUMMARY OF MACHINE TOOL DAMAGE HIROSHIMA, JAPAN FIGURE 2-TI SECRET SECRET GRAPHIC SUMMARY OF CAUSE AND EXTENT OF DAMAGE TO MACHINE TOOLS DISTANCE FROM GROUND ZERO (GZ) " FEET <3> SLIGHT OR NO DAMAGE{NO FIRE) Q 100% TOTAL OR HEAVY DAMAGE BY FIRE £ 100% TOTAL OR HEAVY DAMAGE BY FIRE AND DEBRIS 75% TOTAL OR HEAVY DAMAGE BY DEBRIS (NO FIRE) LEGEND LOAD-BEARING, BRICK - WALL BUILDING TYPE AND FIRE VULNERABILITY COMBUSTIBLE (EXCEPT BLDG. N) COMBUSTIBLE STEEL-FRAME COMBUSTIBLE WOOD-FRAME 8 US. STRATEGIC BOMBING SURVEY MACHINE TOOL DAMAGE VS. BLDG. DAM. HIROSHIMA. JAPAN FIGURE 3 - XC SECRET SECRET MACHINE TOOL DAMAGE IN RELATION TO BUILDING DAMAGE (LIGHT MACHINE TOOLS IN ONE-STORY BUILDINGS) THREE LOAD-BEARING, BRICK-WALL BUILDINGS{ 3300-7500 FEET FROM GROUND ZERO) ELEVEN WOOD-FRAME BUILDINGS (1600-9000 FEET FROM GROUND ZERO) FIVE STEEL-FRAME BUILDINGS ( 1500 - 4700 FEET FROM GROUND ZERO) MACHINE TOOL DAMAGE (TD + HD) FLOOR AREA INVOLVED BY FIRE FLOOR AREA STRUCT. DAMAGED BY FIRE FLOOR AREA STRUCT. DAMAGED BY BLAST PER CENT MACHINE TOOL DAMAGE (TD+HD) FLOOR AREA INVOLVED BY FIRE FLOOR AREA STRUCT. DAMAGED BY FIRE FLOOR AREA STRUCT DAMAGED BY BLAST PER CENT MACHINE TOOL DAMAGE ( TD+ HD ) FLOOR AREA INVOLVED BY FIRE FLOOR AREA STRUCT. DAMAGED BY FIRE FLOOR AREA STRUCT. DAMAGED BY BLAST PE R CENT TD- TOTAL DAMAGE HD - HEAVY DAMAGE [7/1 - DAMAGE BY DEBRIS Z2 -DAMAGE BY FIRE LEGEND 9 mass distortion of the steel frames without tearing loose heavy structural members, and wall- and roof-sheathing debris was too light to cause more than slight damage, and then only to machine tools in buildings relatively close to GZ. A few machine tools were partly overturned by mass movement of building frames (Photos 15 and 1(5). Forty-two percent of the total floor area of the five steel-frame buildings was structurally damaged by blast as compared to 28 percent serious damage to machine tools, none of which was caused by debris (Fig. 3). b. Fire. Fire caused all serious damage to ma- chine tools in the five steel-frame buildings, four of which were combustible and the other noncom- bustible. Three of these buildings, including the noncombustible one, were completely burned out (Photos 14-17). All machine tools were totally or heavily damaged in the burned buildings, the ’per- centage of machine tools seriously damaged (28 percent) being equal to the percentage of floor area involved by fire (Fig. 3). Serious fire damage to machine tools resulted in the combustible buildings because floors and wall and roof sheathing were combustible; combustible debris was blown onto and around the machines; some of the contents were combustible; and the buildings were located in congested, combustible areas which were com- pletely burned over. The machine tools in the noncombustible building were heavily damaged because the floor and some contents were combus- tible and exposing buildings burned close by on two sides. c. Weather. Exposure to weather was the cause of slight damage to machine tools in two steel- frame buildings which had no fire (Photos 18 and 19), and increased the degree of damage to ma- chine tools which had been heavily damaged by fire. As in wood-frame buildings, rusting of ma- chine tools was much more severe in buildings which had burned than in ones which had been only blast damaged. Machine tools in these build- ings were not given a coating of grease or otherwise protected from weather after the attack. 7. Machine Tools in Load-Bearing, Brick-Wall Buildings a. Debris. Debris caused total or heavy damage to machine tools in only one of 3 buildings with load-bearing brick walls, accounting for only 5 percent of all machine tools in this type of build- ings as compared to 23 percent total or heavy dam- age by fire (Fig. 3). This building and another one sustained complete structural damage by blast whereas the third sustained neither structural nor superficial damage. Thirty percent of the total floor area of the 3 buildings was structurally dam- aged. In the building in which total and heavy damage to machine tools occurred the brick wall which faced the blast and the steel roof trusses collapsed onto the machinery (Photo 20). Simi- larly, in the other building 100 percent structurally damaged by blast, the brick wall which faced the blast and the steel roof trusses were collapsed into the building (Photo 22), but, by chance, no ma- chine tools were located close to the wall so the brick debris caused no damage. The steel trusses, which had lateral motion because the brick sup- porting walls collapsed away from the blast, came to rest on some presses but caused only slight damage (Photo 21). b. Fire. Only one of the three load-bearing, brick-wall buildings had fire. This building was completely burned out and all the machine tools were totally or heavily damaged by fire alone, al- though the building was 100 percent structurally damaged by blast (Photos 21 and 22). The rea- sons for the serious damage to machine tools by fire were that the roof was completely collapsed, plac- ing the wood-sheathing debris close to the machine; some of the contents were combustible; and- the building was located in a congested, combustible area which was completely burned over, c. Weather. Exposure to weather was the cause of slight damage to some machine tools in two load-hearing, brick-wall buildings which had no fire, and it increased the degree of damage to machines which had been heavily damaged in the building which burned. As in other types of buildings, rusting of machine tools was more se- vere in the building which burned than in the two which did not. No effort was made to protect the machine tools from the elements after the atomic- bomb attack. 8. Mean Areas of Effectiveness a. Blast and Debris. The number of machine tools in various types of buildings (one-story wood-frame, steel-frame, and load-hearing, brick- wall structures) in the blast-affected area was much too small to permit calculation of reliable MAE’s for serious damage (total or heavy) by blast and debris caused by detonation of the atomic bomb. Based upon observations in a few build- ings, apparently blast and debris were most effec- tive in causing serious damage to machine tools in load-bearing, brick-wall buildings, and least effec- 10 five in steel-frame buildings. There were no machine tools in multistory buildings or in rein- forced-concrete buildings. h. Fire. The MAE for total or heavy damage to machine tools by fire in combustible buildings (one-story wood-frame, steel-frame, and load- hearing. brick-wall structures) was virtually the 4.4-square-mile area of the city which was burned, the radius of the MAE being about 6,250 feet. Only 4 buildings, all of which were combustible, containing machine tools within the burned-over area were not burned. There were machine tools in only one very small noncombustible building within the burned-over area. Although fire caused serious damage to the two machine tools in this building, it is doubtful that fire would have caused serious damage generally to machine tools in modern, noncombustible or fire-resistive ma- chine shops, since serious fire damage to machine tools is dependent primarily upon the combusti- bility of the buildings in which they are housed. 9. Conclusions and Recommendations a. The city of Hiroshima was a poor target for the atomic bomb from the standpoint of damage to machine tools because of the absence of con- centrations of machine tools in the central part of the city. All large industrial plants were lo- cated peripherally on the south and southeastern outskirts of the city and were practically unaf- fected by the explosion of the atomic bomb. h. The atomic bomb caused a small amount of serious damage to machine tools by blast and debris as compared to fire in one-story wood- frame, steel-frame, and load-hearing, brick-wall buildings (Fig. 8). There were no machine tools in multistory buildings or in reinforced-concrete buildings. c. Only 3 percent of the machine tools in the 19 buildings of all types studied sustained serious damage by blast and debris, whereas the same buildings sustained 47 percent structural damage by blast. d. Machine tools in steel-frame, lightly sheathed buildings are least likely to be seriously damaged by blast and debris, and in load-bearing, masonry- wall buildings are most likely to be seriously damaged (Fig. 3). e. In wood-frame buildings, serious damage by debris appeared to have been caused mainly by overhead shafting and pulleys crashing down upon the machine tools. In view of the probabil- ity that belts from overhead shafting overturned or assisted in overturning machines, it is apparent that overhead shafting and other heavy equipment should be eliminated from buildings which are susceptible to mass distortion or collapse by blast. /. Machine tools were overturned by mass move- ment of building frames, sometimes aided by belts from overhead shafting, because the machines were insecurely bolted to foundations, or founda- tions were light and were lifted by the machines. However, only slight damage was caused to the machine tools overturned, probably because the floors were wood or earth. Some heavy damage probably would have resulted if floors had been concrete. h. The number of machine tools in various types of buildings within the blast-affected area was too limited to warrant calculation of MAE’s for total or heavy damage by blast and debris. h. The blast and debris hazard to machine tools can he most effectively limited by installing them in reinforced-concrete buildings of adequate strength and design to withstand the blast pres- sures of the atomic bomb, or by placing them in underground structures. Another alternative would he to install machine tools in steel-frame structures sheathed with a frangible material such as thin, corrugated asbestos. The extent of damage which would be wrought upon machine tools by an atomic bomb detonated on or very near the ground is a matter of con- jecture. The bomb detonated at Hiroshima made no crater and evidently caused no earth shock. If an atomic bomb were detonated on or very near the ground, it is believed that all exposed precision machine tools within several hundred feet in all directions of the point of detonation would be totally or heavily damaged by the combined effects of cratering, earth shock, blast, debris, and intense heat. j. There were no special walls around machine tools for protection against fragmentation, debris, and blast effects of high explosive bombs. Al- though such protective walls constructed of loose bricks were found to have been very effective against high-explosive bombs in Europe, it is believed that they would have been generally inef- fective against the action of the atomic bomb in Hiroshima for several reasons. In the first place, there was apparently no fragmentation hazard from the atomic bomb; secondly, mass distortion of building frames occurred instead of individual members being torn loose and blown through the n air by blast; thirdly, because of the high air burst of the atomic bomb, blast walls would not have shielded machine tools near GZ, and would have shielded them farther away from GZ only if the walls were as high or higher than the machines. Blast walls might have prevented some damage to machine tools in wood-frame and load-bearing, brick-wall buildings by protecting the machine tools from collapsing trusses, overhead shafting and brick walls, but on the other hand, debris from the protective walls themselves might have aug- mented damage. k. The atomic bomb was effective in causing se- rious fire damage to machine tools in wood-frame, steel-frame, and load-bearing, brick-wall build- ings. However, its efficiency on this score was attributable to the combustibility of the city as a whole and the buildings in which the machine tools were housed more than to the heat of the bomb itself. Machine tools were not damaged by flash heat from the bomb. l. The percentage of serious damage to machine tools was closely related to the percentage of floor area involved by fire in the buildings in which they were housed (Fig. 3), all of which were combus- tible except one small noncombustible shop. It is doubtful that fire would have caused serious dam- age generally to machine tools in modern, non- combustible or fire-resistive machine shops. m. All machine tools, although the number was small, were totally or heavily damaged within 3,500 feet from GZ (Fig, 2). All buildings within this distance from GZ were gutted by fire which was the principal cause of serious damage to machine tools. n. The MAE for total or heavy damage to ma- chine tools by fire in combustible buildings was virtually the 4.4-square-mile, burned-over area of the city. o. The fire hazard to machine tools can be most effectively limited by installing them in fire-re- sistive or noncombustible buildings containing a minimum of combustible contents. f. Electric motors were short-circuited and burned as a result of dust and light debris result- ing from blast. In order to eliminate this hazard, electric motors should be dust-proof. q. Exposure to weather caused additional dam- age to many machine tools which had already been damaged by debris or fire. Machine tools which had been exposed to fire effects were most severely rusted, probably because all lubricants and paint had been burned off. Most of the weather dam- age to machine tools could have been prevented by greasing or otherwise protecting them within the first few days after the atomic-bomb attack. 12 PHOTO 1-XI. Building A, 1,600 feet west of GZ, looking northwest. A wood-frame, light-engineering shop destroyed by blast. Debris broke casting of shear at left but casting was weak, having been cracked and welded previously. Fire burned combustible debris and seriously damaged remainder of machine tools. PHOTO 2-XI. Building B, 3,400 feet northwest of GZ, looking west. A congested, wood-frame, light-engineer- ing shop totally damaged by blast. All machine tools seriously damaged, caused mainly by fire which burned debris. Note partly overturned drill press and overhead line shafting thrown over wall away from blast. 13 PHOTO 3-XI. Building C, 4,000 feet northwest of GZ, looking west. A wood-frame building about 75 percent struc- turally damaged by blast. No serious damage to machine tools, no fire in building. Note light combustible debris on floor; machine tools unprotected from weather. 14 PHOTO 4-XI. Building C, 4,000 feet northwest of GZ, looking southwest. Shows wood truss resting on heavy machine at southwest corner of wood-frame building collapsed by blast. Only slight damage to machine. Note machine unprotected from weather. No fire in building. 15 PHOTO 5- XL Building D, 4,100 feet northwest of GZ, looking southwest. A wood-frame, needle manu- facturing plant destroyed by blast. Serious damage to machinery caused mainly by fire which burned combustible debris. PHOTO 6-XI. Building E, 4,700 feet southwest of GZ, looking northwest. A wood-frame, light- engineering shop destroyed by blast. Serious damage entirely by fire which burned combustible debris. Note milling machine at right overturned when blast collapsed building. Press in center partly overturned in same manner. 16 PHOTO 7-XI. Building F, 4,900 feet southeast of GZ, looking southeast. A wood-frame, light-engineering shop structurally damaged by blast. Ensuing fire caused all serious damage to machine tools. Note line shafting resting on machines; building was shielded somewhat from blast and shafting apparently did not crash down. PHOTO 8-XI. Building H, 6,500 feet southeast of GZ, looking northwest. A wood-frame, light-engineering shop structurally damaged by blast. Ensuing fire caused most of serious damage to machine tools. Note cracked concrete base of small lathe at left. 17 PHOTO 9-XI. Building G, 6,000 feet south of GZ, looking west. A wood-frame, light-engineering shop collapsed as a unit by blast (no fire). Wood trusses had lateral motion imparted by blast and came to rest on lathes, damaging them only slightly. These machine tools were given a protective coating of grease soon after the atomic-bomb attack. 18 PHOTO 10-XI. Building G, 6,000 feet south of GZ, looking south. A wood-frame machine shop collapsed by blast. Several machine tools (drill presses and shapers) inside north wall facing blast were overturned by mass movement of building frame. Machines were mounted on individual slabs of concrete which in some cases were uprooted by overturn- ing of the machines. Only slight damage to machine tools by debris and exposure to weather. Note protective coating of grease on parts of machines. 19 PHOTO 11-XI. Building J, 7,500 feet south of GZ, looking east. A wood-frame machine shop super- ficially damaged by blast (no fire). Some machine tools slightly damaged by weather. Note corrugated- iron sheets on machines. PHOTO 12-XI. Building K, 7,600 feet south of GZ, looking east. A wood-frame machine shop practically undamaged by blast (no fire). No damage to machine tools. Note tarpaulin over equipment at left. 20 PHOTO 13 XI. Building L, 9,000 feet east of GZ, looking north. A wood-frame, light-engineering shop destroyed by fire near edge of a completely burned, congested area. Serious fire damage to ah machine tools. Note machines unprotected from weather. PHOTO 14-XI. Building M, 1,500 feet west of GZ, looking north. A steel-frame, combustible machine shop structurally damaged by blast. Slight damage to machine tools by debris, but serious damage to all by fire. Entire surrounding congested area burned over. 21 PHOTO 15-XI. Building M, 1,500 feet west of GZ, looking east. Shows drill press partly over- turned and small casting broken at the top by mass distortion of steel frame of building. All machine tools seriously damaged by fire. PHOTO 16-XI. Building N, 1,800 feet east of GZ, looking north. A steel-frame, noncombustible repair shop structurally damaged by blast. Drill press and lathe seriously damaged by fire in com- bustible floor and contents. Note rubber tires on bicycles burned. 22 PHOTO 17-XI. Building P, 3,300 feet northwest of GZ, looking east. A steel-frame, combustible, light- engineering shop superficially damaged by blast. No damage to machine tools by blast or debris. Serious damage to all machine tools by fire in combustible debris and wood floor. Entire congested area burned over. 23 PHOTO 18-XI. Building Q, 4,700 feet west of GZ, looking east. A steel-frame, combustible, heavy- engineering shop structurally damaged at east end by blast. No damage to machine tools by blast or debris. No fire. . PHOTO 19-XI. Building R, 4,700 feet west of GZ, looking east. A steel-frame, combustible, heavy- engineering shop about one-half structurally damaged by blast. No damage to machine tools by blast or debris. No fire. 24 PHOTO 20-XI. Building T, 4,000 feet northwest of GZ, looking west. A small, combustible machine shop with load-bearing brick walls. South and east walls, which faced blast, and roof were collapsed into building by blast, totally or heavily damaging 75 percent of machine tools. Remainder of machine tools slightly dam- aged by weather. No fire. 25 PHOTO 21-XI. Building S, 3,300 feet northwest of GZ, looking west. A combustible, light-engineering shop with load-bearing brick walls completely collapsed by blast. Note steel trusses resting on presses; trusses had lateral motion imparted by blast and caused only slight damage to machines. Combustible roof debris and con- tents burned and caused serious damage to all machine tools. 26 PHOTO 22-XI. Building S, 3,300 feet northwest of GZ, looking north. A load-bearing, brick-wall machine shop completely collapsed by blast. Walls at right collapsed into building, but no machine tools were located near it. Steel trusses came to rest on machines but apparently did not crash down because of lateral motion imparted by blast, and only slight damage resulted. Fire caused serious damage to all machine tools. PHOTO 23-XI. Building U, 7,500 feet east of GZ, looking east. A load-bearing, brick-wall, combus- tible machine shop practically undamaged by blast. No damage to machines by blast or debris. No fire. Slight damage to few machine by weather. 731568—47 3 27 SECTION XII DAMAGE TO BRIDGES Page Summary 29 Description of bridge system 33 Analysis of damage 36 Recommendations and conclusions 43 Data sheets 113 Photos l-l 10, inclusive. Figures 1-20, inclusive. Tables 1-4, inclusive. Graph 1. 28 1. Summary a. General. The atomic bomb detonated at Hiroshima, although it was an extremely powerful blast weapon, caused relatively little structural damage to the 81 important bridges. Scattered throughout the entire city, the bridges, 260 to 15.600 feet from ground zero (GZ), connected islands to islands and islands to mainland, forming an adequate and efficient bridge system. Not only did the bridges satisfy local transportation needs but they served also as overcrossings for the city services and utilities, and as a connecting link in the important Inland Sea coastal highway between Osaka and Shimonoseki (Fig. 1). h. Fifty-seven of the 81 bridges were se- lected for detailed study on the basis of location, type, and use. The bridges selected varied in loca- tion from 260 to 12,200 feet from GZ. 'They com- prised 19 timber, 15 concrete, and 23 steel bridges; and in use they were classified as railroad, street railway, highway, and pedestrian bridges, and aqueducts. No bridge damage resulting from the atomic bomb detonation was found beyond 7,600 feet from GZ (Table 1). e. The 6 railroad bridges (5,580 to 8,480 feet from GZ), scattered along a circle at the foot of the hills in the northerly part of the city, were most distant from GZ. Strongly constructed of steel, they completely escaped damage except for radiant heat effects which, on 4 bridges, discolored to a minor degree the paint on girders on the side toward GZ. As an indirect effect, however, near- by fires resulting from the bomb explosion and debris thrown onto the tracks by blast closed the railroad lines to traffic for 2 days. (I. The nine street railway bridges (1,000 to 7.600 feet from GZ) were located principally in the heart of the city. They comprised two timber, one reinforced-concrete and six steel bridges. The damage incurred was limited to destruction by blast and fire of one timber bridge (4,670 feet from GZ), and blast damage to two steel bridges, one located 1,000 feet, and the other 4,670 feet from GZ which were closed to traffic for 3 and 30 days, respectively. Although closing the latter isolated the Hiroshima railroad passenger sta- tion and northeast part of the city from street railway service for 30 days, the total of all damage to bridges carrying street-railway tracks was not serious. e. The 39 highway bridges (260 to 12,200 feet from GZ) comprising 14 timber, 15 concrete and 10 steel bridges, were most numerous as a class. They were scattered throughout the city and in- cluded bridges which were the nearest to, and the most remote from, GZ, so that the effects of the bomb on these bridges varied greatly. One steel bridge (1,190 feet from GZ) was totally collapsed by blast. Five steel bridges (260 to 7,600 feet from GZ) and live concrete bridges (4,270 to 6,450 feet from GZ) were damaged in extent varying from distorted and displaced decks and minor structural members to broken railings, curbs, posts and copings. Five timber bridges were structur- ally damaged by fire. Despite the fact that six highway bridges were totally damaged by the atomic bomb, the damage did not isolate any part of the city or seriously disrupt traffic. f. All four pedestrian bridges (3,200 to 7,960 feet from GZ) were of timber construction. None was damaged by blast, but one (4,760 feet from GZ) was completely consumed by fire which spread from adjacent areas. The loss of this bridge caused no serious inconvenience, since traffic was rerouted over a structurally undamaged bridge within a distance of 900 feet. g. Seven bridges (4 timber and 3 steel) which served as aqueducts and over-crossings for utili- ties were structurally damaged by blast and fire. All 4 timber bridges and 1 steel bridge were col- lapsed by blast and fire. The collapse or failure of the 7 bridges damaged 5,000 pairs of telephone wire in cables; one 16-inch and one 14-inch diame- ter water main: 840 feet of 12-inch diameter and 410 feet of 8-inch low pressure gas mains; and 270 feet of 6-inch diameter high-pressure gas mains. To place these utilities in operation would have required complete rebuilding of five overcrossings and repairs to the other two. h. Vulnerability. Of the three types (timber, steel, concrete) studied in Hiroshima, timber bridges showed the least resistance to the effects of the atomic bomb. In terms of deck area, it was found that blast and fire totally damaged 33 per- cent of the 19 timber bridges, and 4 percent of the 23 steel bridges. None of the 15 concrete bridges suffered total damage. These percentages do not include such damage as broken railings, curbs, copings, and dislodged members, of which 5 concrete and 5 steel bridges showed a moderate amount (Table 4). There were insufficient data on bridges to compute reliable MAE’s for all types. The analysis of data, however, led to the 29 below-listed conclusions on MAE’s for structural damage by blast to bridges (graph 1). Timber bridges, 2.4 square miles. Steel bridges, 0 square mile. Concrete bridges, 0 square mile. i. In summation, impressive evidence of the abil- ity of bridges to resist the forces of the Hiroshima atomic bomb (air-burst at 2,000 feet) was found in the facts that (1) 10 of 19 timber bridges studied were undamaged, (2) 10 of 15 concrete bridges had no damage, and (3) 14 to 23 steel bridges were undamaged ('Fable 4). j. Since bridges are designed to resist heavy ver- tical loads, the fact that those near GZ received the blast forces largely in the direction of their greatest strength minimized the damage to them. Also, as evidenced by plate-girder Bridge 22 (260 feet from GZ and 2,020 feet from AZ), the orienta- tion of the longitudinal center line toward GZ tended to decrease damage, e, g., the extended center line of Bridge 22 passed within approxi- mately 50 feet of GZ; consequently, horizontal components of the blast forces were exerted in the direction in which the bridge was most resistant to such forces. At the same time the probability of damage from reflected blast waves was minimized. Bridge 24 (1,000 feet from GZ and 2,230 feet from AZ), with its extended center line passing approxi- mately 650 feet from GZ, was similar in strength and construction to Bridge 22. It was, however, damaged more spectacularly and in greater degree due to reflected forces and skewed broadside ex- posure to horizontal components of the pressure wave. Negative pressures were generally unim- portant in causing structural damage, but there was evidence that, at bridges within approximately 1,000 feet of GZ, there was an inrush of air follow- ing the initial positive blast. k. It is probable that a bomb similar to the one used at Hiroshima, if detonated at an altitude lower than 2,000 feet, would cause appreciably more damage to bridges near GZ. But the height of detonation which would produce blast loadings exceeding the strength of the bridges is unknown. As discussed in the preceding paragraph, bridges near GZ had the advantage of receiving blast forces in the direction of their greatest strength, and, when oriented toward GZ, were most resist- ant to lateral forces and less liable to damage from reflected blast pressures. Therefore, the critical point of detonation for bridges would be one at which blast forces would be developed large enough to collapse the bridges by overloading the structural members. At lower altitudes of deto- nation it appears likely that the radius of damage at Hiroshima would have been decreased, due principally to the bridges being at ground eleva- tion and therefore shielded to the maximum de- gree. The damage pattern would also probably have been less regular. Whether or not the ad- vantage of shielding would have been offset by the larger horizontal components against the vertical bridge members is speculative. l. Despite the great care exercised in segregat- ing the damage to bridges attributable to the atomic bomb from the Hood and typhoon damage occurring on IT September and 5 October 1945, respectively, there is a distinct probability that the blast loadings from the bomb weakened some of the bridges and left them in a vulnerable condi- tion. Flood and typhoon were credited with dam- aging to some degree nine timber, seven concrete and three steel bridges. m. When considering the usefulness of the bridge system immediately following the detona- tion of the bomb, factors which should be con- sidered in addition to actual damage to the system were the innumerable fires in areas adjacent to bridge entrances and exits, the debris from col- lapsed buildings which cluttered the bridge decks and roadways, and the general devastation and destruction which, depriving the city of the use of its bridges, temporarily trapped inhabitants on the islands without hope of immediate escape or relief from outside. Thirty hours elapsed be- fore the first relief party penetrated the stricken area. Although the bridges generally resisted effectively the blast and fire from the bomb, lack of protection for the approaches and areas adja- cent to the ends of the bridges rendered them al- most useless at the time they were most needed. n. Samples and Laboratory Testing of Mate- rials. Members of the survey took samples of two cast-iron, railing-post sections from Bridges 23 and 24, and also paint samples from Bridges 26 and 27. These samples were brought back for the purpose of making laboratory tests of the materials, and of incorporating the results in the report as part of the data for future reference. The National Bureau of Standards tested the two cast-iron, rail- ing-post sections and found them to correspond to ASTM Spec. A48-41, Class 20, the classification of lowest tensile strength for gray iron castings. The relationships among the tensile, compressive and 30 SECRET GRAPHIC SUMMARY OF DAMAGE TO BRIDGES SHOWING LOCATION OF CONCRETE, STEEL AND TIMBER BRIDGES WITH RESPECT TO DISTANCE FROM GROUND ZERO (GZ). CONCRETE BRIDGES GROUND ZERO STEEL BRIDGES GROUND ZERO TIMBER BRIDGES GROUND ZERO LEGEND ATOMIC BOMB BLAST DAMAGE CONCLUSIONS | Blast Damage (Slight | Structural) | Superficial Blast Damage | | Flood Damage < Tire Damage Blast ft Fire Damage Blast 8 Flood Damage | Flood a Fire Damage I No Damage SECRET MEAN AREA OF EFFECTIVENESS ASOUT SZ TINMEN t.4 SO Ml STEEL 0.0 SO Ml CONCRETE 0.0 SO Ml MEAN RADIUS OF EFFECTIVENESS FROM «Z ♦SOO FT 0 FT 0 FT US. STRATEGIC BOMBING SURVEY BRIDGE DAMAGE GRAPH HIROSHIMA JAPAN GRAPH I - in 731568 0 - 47 (Face p. 30) Bridge features ( Distances from zero point Bridge damage (structural) Bridge Grid Use of Type of Width Num- ber of spans Span length (feet) Approx- imate OZ AZ Extent Cause Percentage type Remarks ber bridge construction (feet) length (feet) (feet) (feet) Blast Fire Flood 1 5K Highway Timber 20 13 30 390 9. 800 10. 000 None 2 5J Railroad- Plate girder. 9 10 45 450 8, 480 8,740 _ ...do ... 3 5J Highway . Concrete 24. 5 8 2 @ 33 276 7. 130 7,390 Severe 50 Pedestrian use, carrying 16" W. L. 6 @ 35 4 5J do do 65. 5 5 Varies 250 6. 450 6, 750 None Trolley traffic. Pedestrian use. 5 5J do do 26 5 2 @ 42 204 6,210 6, 510 3 @40 5A 5J Aqueduct .. - Steel-truss 5.3 5 44 220 6. 160 6. 470 do Carrying 16" W. L. Pedestrian use. Do. 6 4T Highway. Timber 17.8 7 38 266 5, 370 5. 200 5,730 5. 570 Complete destruction... None. 10 90 7 41 do Concrete 23. 5 8 36 288 7 A 41 Aqueduct Steel-truss 7.3 4 2@ 50 290 5, 240 5,600 Carrying 22" W. L. 6 @ 47.5 11 21 Pedestrian Suspension 9 i 220 220 7,960 8. 200 None Timber deck, suspension cable. Pedestrian use, carrying 16"0 W. L. 12 51 Highway Plate girder 26 3 2@ 59 208 4,700 6,100 Girder, I-beam.- 1 @ 90 13 51 Trolley 18 9 Varies 289 4, 670 4, 670 4, 760 5,080 5 20 Double-track trolley. Do. Foot bridge. Pedestrian use. Do 13A 51 do Timber 18 9 33 307 5,080 5, 170 Complete destruction. _. 10 90 100 14 51 Pedestrian do 19.8 10 30 300 15 61 Highway do 19 15 Varies 309 5, ,580 5.900 16 61 do _ Concrete. .. _ 66 7 Varies 367 5, 750 6,100 8,870 17 7H do Plate girder 72 9 Varies 544 7,600 do Double track trolley, carrying 12" W . L. 18 70 do Timber. .. 19 16 28 448 6, 000 6,300 4, 720 Pedestrian use. Pedestrian use, carrying 18" W. L. 19 6G do Concrete 24 7 37 259 4, 270 20 60 do Girder I-beam _ _ 15 9 2@ 33 276 2,900 3, 450 do Pedestrian use, carrying 16" W. L. 7 @30 21 5H do_ Timber . 32.8 10 29.5 295 1,450 260 2,460 2,020 Complete destruction. _ None Blast and flood 20 80 Pedestrian use. Pedestrian use, carrying 16" W. L. 22 5H do Plate girder 23 3 2 @ 43 164 1 @ 78 23 4H do... do 24 4 Varies 204 860 2,170 2,230 5, 570 6,100 4, 790 Pedestrian use. 24 4H do 72 7 Varies 407 1,000 5, 200 10 25 30 do Concrete 24 14 40 560 15 trolley. 26 3H Railroad Plate girder IS 11 75 825 5,750 4, 360 27 30 Highway Steel-arch 23.5 1 200 200 do Pedestrian use, carrying 10" W. L. ' 1 Table 1—XII.—Bridge data 31 Bridge features Distances from zero point Bridge damage (structural) Remarks Bridge num- ber Grid Use of bridge Type of construction Width (feet) Num- ber of spans Span length (feet) Approx- imate length (feet) GZ (feet) AZ (feet) Extent Cause Percentage type Blast Fire Flood 28 30 65. 7 6 33 198 4, 430 4, 840 Complete destruction,.. Flood,,, , , 100 Pedestrian use, double track trolley. 29 5G Ho 20 3 80 240 1, 190 2,310 do Blast 100 Pedestrian use, carrying 16" 0 steel-truss. W. L. 30 5G do 24 7 2 @ 45 340 1,930 2,800 Severe Flood,, 60 Pedestrian use. 5 (g50 30A 50 Aqueduct Steel-bowl-truss,, 5 7 50 350 1.880 2, 750 Slight Blast 10 Carrying 16" W. L. 60 25 12 2 @ 29 358 4, 570 5,000 Flood 60 Pedestrian use, carrying 16" 10 @ 30 W. L. 18 30 22 660 9.400 9. 600 do 70 Pedestrian use. 33 6F 18 12 2 @ 27 414 5. 300 5, 650 do do 70 Pedestrian use, carrying 16" 0 10 36 W. L. 17.8 12 26 312 3, 700 4,200 Complete destruction, Fire 100 Pedestrian use. 16 8 33 264 3,190 3, 750 Flood 100 Double track trolley. 10 25 175 3,200 3, 760 do._. do 100 6" 0 gas line. 50 22 3 4 2 @ 44 168 3, 220 3, 770 do 55 Pedestrian use, carrying 14" 0 plate girder. 2 @40 W. L. 38 4G do 12.1 n 30 330 3. 750 4. 250 Complete destruction,,. Fire and flood,, . 50 50 Pedestrian use. 4G 16.8 16 26 415 3, 880 4,390 do do 30 70 Do. 3G do 17.9 19 22 421 5. 360 5, 700 Severe Fire 55 Do. 12 3 20 60 6. 150 6, 460 None , , Do. 4JP 17.9 14 30 421 5,100 5, 490 Complete destruction, __ Flood 100 Do. 43 4F 18 16 25 400 5,180 5,510 Blast and fire . 10 90 Pedestrian use, carrying 14" 0 W. L. 44 16 14 34 476 5,300 5.650 Double track trolley. 5F 19 12 36 432 7,010 7.300 Moderate , Flood 15 Pedestrian use. 13. 1 10 22 220 8.090 8. 350 Complete destruction, . do 100 Do. 16 10 34 340 7, 450 7, 700 Double track trolley. 48 4E 24 4 60 240 7,130 7,400 Pedestrian use, 12" 0 and 14" 0 W. L. 3 11 15 163 6, 380 Flood 100 Foot traffic only. 50 30 18 . 10 6 @ 35 390 6, 580 6, 900 Double track railroad. 4 (5» 45 51 30 18 2 33 66 6, 450 6,780 Double track railroad, under- pass also. 52 8J 14 8 3 1 @ 43 103 12, 200 12, 450 Pedestrian use. 2@ 30 Table 1—XII.—Bridge data—Continued 32 shearing strengths were, however, about the same as in domestic cast irons of the same class, the car- bon content being somewhat higher, and the silicon and manganese contents considerably lower. Re- sults of paint tests have not yet been completed. 2. Description of Bridge System a. Topographical and Historical. The city of Hiroshima was located upon the deltaic deposits of the Ota River, a relatively short, fast-flowing river which originated in the mountains north of the city. This delta was situated at the end of one of the few valleys running southwest to northeast across the Chugoku mountain range. The Ota River, flowing through the granite rocks of the mountains, flooded the delta, leaving deposits of earth and sand along the river beds. The beds, or branches, named from east to west, became known as the Enko-Gawa (River), Kyobashi-Gawa, Motoyasu-Gawa, Temma-Gawa, Fukushima-Gawa, and Yamate-Gawa. Eventually they separated the delta into the seven islands of Hiroshima (Fig. 1). Hiroshima was at the junction of the sea and land routes connecting Kyoto, Osaka, and Shimo- noseki, and the northerly transmountain route to the coast of the Japan Sea. Since early times much importance had been attached to Hiroshima as a communications center, as well as the military and political headquarters of the Chugoku district. h. Growth of Bridge System. The main thor- oughfare was originally laid out around the foot of the mountain range in a semicircle convex northward and kept at a ground elevation above the dangers of flood and tide. Today the Sanyo line of the government railways follows the old highway in its route through Hiroshima toward Shimonoseki, using Bridges 9, 26, and 50 (Fig. I) to cross the Kyobashi, Ota, and Yainate Rivers, respectively. As the city spread southward with the land reclamation projects which extended the islands seaward, surface communications from island to mainland and island to island required an ever-increasing number of bridges to accommo- date not only the peak population of 380,000 per- sons in Hiroshima, but also the traffic passing through the city on the Inland Sea coastal highway. c. Flood Effects on the System. A factor of prime importance in the development of the bridge system was the annual flood stages which the Ota River and its branches reached during the typhoon season from May through October. During these months the rivers frequently rose as much as 15 feet above normal mean high water and caused severe damage along their six beds by washing away the alluvial deposits from around the foot- ings of the piers and bents to such an extent (as deep as 30 feet below normal grade) as frequently to impair the structural safety of the bridges and close them to traffic. In the Hiroshima area foundation soils were of a sandy nature, rock bot- tom being seldom encountered. To protect against erosion, the foundations of piers for steel and reinforced-concrete bridges were carried by concrete caissons to depths of approximately 30 feet below the river bed. The typhoons of IT September and 5 October 1945 caused considerable additional damage to the bridges which had un- dergone the atomic-bomb attack on 6 August. d. Selection of Bridges for Study. Of the many bridges found in Hiroshima by the team upon its arrival on 14 October 1945, 57 were se- lected for study in connection with physical damage resulting from the atomic-bomb attack. In this selection, primary considerations were given to location, use, and construction. The bridges (Fig. 1) ranged from 260 to 12,200 feet from ground zero (GZ) and were scattered throughout an approximate area of 12 square miles. In use, they were classified as railroad, street railway, highway, pedestrian, aqueduct, and mixed. The railroad bridges were princi- pally in the northerly part of the city, the street railway bridges in the center, and the others dis- tributed over the city. Of the 57 bridges studied, 23 were steel, 19 timber, and 15 reinforced concrete. e. Ownersh ip and Maintenance. At the start of the survey no estimate of damage had been pre- pared by the governmental agencies, but repairs to some damaged bridges were in progress, and others were scheduled. Most plans and records showing conditions prior to 6 August had been destroyed by the atomic-bomb holocaust. How- ever. according to the opinion of the city engineer, approximately 80 percent of all bents and piers of the city-owned bridges were in good condition prior to the attack. The city had also repaired all damage from the 1944 flood and the remaining portions of the bridges had been checked over by the bridge department of the city. All railroad bridges maintained by the Japanese government were in excellent condition and all the highway bridges maintained by the prefectural govern- ment were in a good state of maintenance. The bridges carrying double-track street railways 33 maintained by the Hiroshima Electric Railway, Inc., were also in good condition. In November 1945, at the time of the survey, as the rate of return of residents increased, several bridges were under repair and the city engineers were planning to repair such others as was necessary to accommo- date the flow of traffic along a northerly and south- erly route through Hiroshima in order to prevent traffic bottlenecks in the city. Under considera- tion were Bridges 19, 31, 33, 45, and 4(5 which ac- commodated the southerly route and Bridges 37, 13, and 48 which accommodated the northerly one. In addition, the street-railway company had planned to make whatever repairs were deemed necessary to their own bridges. Bridge 13, the most important, had been under repair since before 12 October 1945. /. Bridge Design. Inasmuch as most of the records of Hiroshima were burned or destroyed, little information was obtainable regarding the design of the bridge structures. Therefore, it was necessary to consult other sources, such as the Hiroshima Electric Railway, the city engineers, the prefectural government engineers and the gov- ernment railroad officials, in searching for design standards and other pertinent information. From the few records available, and in many cases from memory, these agencies furnished much of the data incorporated in this section. Verified and supplemented by observation, interrogation, and inspection of documents, the data established that four principal ownerships of bridges existed in Hiroshima and that each differed somewhat from the others in design practice. In most cases the differences were explained by bridge use, rather than by official prerogatives. All the de- sign criteria are discussed in the following para- graphs. (1) Bridge Use. In the target area the bridges varied widely in use. Of the 57 studied, 39 were used to carry highway traffic (4 accommodated both highway and street-railway traffic) ; 5 were street-railway bridges; (5 carried railroads; 3 were used as aqueducts; and 4 were for the use of pedes- trians. One of the pedestrian bridges was unique, being a Japanese Army suspension bridge with steel cables and timber deck. (2) Loading. Timber bridges were designed for a single concentrated load of 12 to 15 tons per traffic lane. The city engineers did not know whether or not the timber bridges were designed for uniform loadings, earthquake, wind, or flood resistance. Timber piles were driven to a 4-ton capacity at a depth of approximately 9 feet below river beds by a pile driver with a 3.28-foot drop and a 0.3-ton drop-hammer when concrete founda- tions for the timber piles were omitted. In some cases a concrete foundation approximately 10 feet deep, 6 feet wide, and 12 to 20 feet long was con- structed around pile bents. The length depended on the number of timber piles per bent. The pi les were from 10 to 12 inches in diameter, approxi- mately 30 feet long and extended into the concrete about 1.5 feet below the top of the foundation. Rein forced-concrete and steel-girder highway bridges were designed for a uniform load of 100 pounds per square foot. Impact was taken as 30 percent of the live load. Concentrated loads of 12 tons per girder were taken as design loads for steel bridges and 12 to 15 tons per traffic lane were taken for concrete bridges. The prefectural-owned bridges (Table 3) were designed for earthquake resistance after 1922. Interrogation of the pre- fectural government engineers indicated that earthquakes were very light and rare in the Hiro- shima area. Nevertheless, earthquake resistance was taken into consideration for design purposes by allowing 15 percent of the dead load as the over- turning force for steel-plate girders and 30 percent of the dead load as the overturning force for con- crete piers acting at their respective center heights. Information did not indicate whether these bridges were designed for wind and flood resistance (Fig. 7). Railroad bridges were designed for Cooper’s E-40 live load. No other information could be secured through interrogation in regard to design data. However, interrogation did disclose that the railroad engines were known as class D-51, weigh- ing approximately 77 tons, and class D-52, weigh- ing approximately 85 tons. The largest passenger car had a net weight of 35 tons and a gross weight of 50 tons, while the largest freight car had net and gross weights of 27 and 50 tons, respectively. Street-railway bridges carried a double-track rail- way. These bridges were designed for a total load of 20 tons which included earthquake resistance, passenger loading, and weight of street car. No other information in regard to design data was available except that, through interrogation, engi- neers stated that both the earthquake-resistance factor and the distributed load produced by the passengers in streetcars were reduced to equivalent concentrated loads for design. For purposes of design, a total load of 3.25 tons per streetcar wheel 34 Table 2.—Street-railway bridges (schedule of materials) Description Temma-Qawa Bridge (Bridge 35) (typical) Section and weight (per linear foot) Length Weight per piece (pounds) Num- ber re- quired for bent Total weight (pounds) Feet Inches I-beams 15 by 5 inches bv 42 pounds 23 0 966 4 3, 864. 00 Angles 6 bv 6 by }{§ inches by 17.2 pounds 18 6 318. 2 2 634. 40 Do do , 18 0 309. 6 2 619 20 Do 6 by 6 by % inches bv 14.9 pounds 1 0 14. 9 32 476 80 Do. _ 3’/£ by 3 by % inches by 7.9 pounds .. 12 9 100. 73 2 201. 46 Do do 12 3 96. 78 2 193. 56 Plates 24 by 3/& inches by 30.6 pounds 2 6 76. 50 4 306. 00 Do. ... 18 by % inches by 22.96 pounds . _ . . 2 0 45. 92 4 183. 58 Do 15 by % inches by 19.14 pounds 1 6 28. 71 8 229. 68 Do 9 bv % inches by 11.48 pounds 2 3 % 26. 55 2 53 10 Rivet % inch in diameter. 0. 123 792 97 42 Total we ight per bent . _ 6, 861 31 was used. The company used two types of cars known as .1 car, weighing 18 tons (empty) and B car, weighing 14,7 tons (empty). In bridge de- sign, cars A and B were assumed to weigh 26 tons fully loaded. The designers also assumed that a car when fully loaded would carry 160 persons. Each person was assumed to weigh 111 pounds and the approximate total passenger load was, there- fore. 8.8 tons per car (Fig. 7). (3) Stresses. The working stresses for timber bridges were not ascertainable. It was estab- lished, however, that working stresses of 16,000 pounds per square inch were used for steel and 640 pounds per square inch for concrete. The re- inforced-concrete bridges were designed for con- crete having an ultimate strength of 2,000 pounds per square inch in compression and for working stresses as follows: Tension, 64 pounds per square inch; shear, 64 pounds per square inch; compres- sion, 640 pounds per square inch; compression in flexure, 640 pounds per square inch; except that prefectural government engineers used 500 pounds per square inch for concrete in compression. g. Construction. Generally, the design, details, and arrangements for timber, concrete, steel-plate- girder, and rolled-section I-beam bridges used for both highway and street-railway traffic appeared to be below United States standards. The steel- plate-girder bridges for railroad traffic and steel- truss aqueducts compared favorably with similar structures in the United States. (1) Timber Bridges. Field investigations showed that floor beams were not used and that stapled connections were used instead of bolts. Connections were not rigid over pile bents and bolster plates were placed directly beneath timber girders. Diagonal bracing for timber piling was insufficient. Rough log members were used in sev- eral bridges instead of dimension timber (Fig. 19). (2) Steel Bridges employed girders haunched at supports as a general practice, and the continuity of spans was discarded in favor of cantilever de- sign, due to poor foundations and piers which fre- quently settled. Rocker plates were used in some bridges at supports (Figs. 3 and 4), (3) In Reinfbrced-Concrete Bridges haunching of girders at supports was common practice and cantilever design was substituted for span con- tinuity over supports because of poor foundations and piers which frequently settled. Floor beams were not used. However, a greater number of closely spaced, concrete longitudinal beams was employed, thereby transmitting the deck loads directly to the abutments and bents. The con- struction of railings, ornamental posts, caps, cop- ings and curbs would have been comparable with United States standards of construction if they had been properly anchored, keyed or doweled to the structures (Photos 13 and 36, and Fig. 8). In- terrogation and inspection showed that the splicing of reinforcing bars was not practiced. h. Materials. In general, the quality of mate- rials appeared to be below United States standards. An exception was the steel employed in bridge structures which in size and appearance were com- parable with United States standards. 35 (1) Timber. Field inspections showed that timber materials were considerably below United States standards. No evidence indicated that timber was treated with creosote or other pre- servatives. Dimensions were not normally of commercial sizes, and in many cases rough logs were used in the structures. In no case did the team find that timber bridges had received a pro- tective coat of paint. (2) Concrete. The aggregates used for con- crete were sand and gravel from the local river beds, the former being unscreened. Gravel, how- ever, was screened in an attempt to obtain some gradation, with maximum size stones of 2 to 3 inches. The cement was manufactured and ob- tained from the Ube Cement Co. and the Oroda Cement Co., both located in Tamaguchi Prefec- ture. Some cement was obtained from the nearby Asano Cement Co, (3) Steel. Sizes of bars varied from 14 to I14 inches in diameter for steel reinforcing. Rein- forcing for deck slabs varied from one-fourth to five-eighths inch in diameter. Stirrups were of various types and sizes. Temperature reinforce- ment was not used nor were square steel rods. Deformed reinforcing bars were not used princi- pally because they were 50 percent more costly than plain bars. Rolled-steel I-beams were of standard sizes, reinforced against buckling by dia- phragms and angle stiffeners. All materials (Ta- ble 2) were usually of medium steel and appeared to be comparable with United States standards. Steel received one shop coat of red-lead paint be- fore shipment, and protective field coats later. A cast metal sign fastened to the face of the girders of railroad Bridge 51 showed the shipment and manufacturing of the materials as follows (Photo 109) : Materials: Angles, IJG Steel Works, Kawa- saki Zosenshokobe. Plate: Asano Zosen Seihambu. Rivets: Asano Rokuro Seikosho. 3. Analysis of Damage a. Chronology and Use of Data. In assessing the damage to Hiroshima by the atomic bomb a difficult problem was to distinguish between bomb damage and flood and typhoon damage which came later. Since this complexity of damage was especially evident in the bridge system, it was felt that a chronological consideration of damage in- cidents and other data would serve as a valuable check list. Therefore, the cause and extent of damage to each bridge was established only after it had been carefully considered in relation to each of the following: (1) Preattack air photos, dated 13 April 1945. (2) Atomic-bomb damage of 6 August 1945. (3) Postattack air photos, dated 7 August 1945. (4) Flood damage of 17 September 1945. (5) Flood and typhoon damage of 5 October 1945. (6) Field observation from 14 October through 24 November 1945. (7) Japanese drawings and documents, (8) Interrogation of eyewitnesses and officials. It is noteworthy that in the interval between the dropping of the atomic bomb and the arrival of the team two months later there occurred two severe storms, of which at least one had an in- tensity such as would be encountered only once in perhaps 50 or 100 years. These storms, unfortu- nately, destroyed much evidence of bomb action to bridges when they washed away the damaged structures. h. Method of Analysis. Each of the 57 bridges selected for study was numbered and its location in relation to the point of detonation of the bomb (air zero, or AZ), and the point on the ground directly below AZ (ground zero, or GZ) was estab- lished (Fig. 1). Each individual bridge was then studied in detail with respect to its use, design, materials, special features, strength, quality of construction, cause of damage and extent of dam- age. Photographs of the bridges were taken to show the condition of the structures at the time of the field survey. c. Definition of Terms. The damage, resulting from many causes occurring at different times, had left an analysis problem of considerable com- plexity. Therefore, for assessment, evaluation, and tabulation, the following classifications of damage was adopted by the survey. (1) Total Damage. Damage requiring replace- ment of the entire bridge, or from 90 to 100 percent of spans and piers or bents. (2) Severe Damage. Damage to the major part of the structure, requiring replacement of between 50 and 90 percent of the spans and piers or bents. (3) Moderate Damage. Damage to the spans, piers or bents that could be repaired in a rela- tively short time; structural damage requiring re- placement of between 10 and 15 percent of the spans and piers or bents. 36 Table 3.—Prefectural government bridges Bridge No. Type Use Approxi- mate year con- structed Earthquake- resistance design Remarks Concrete High way _ 1925 Yes Note.—(1) After the year 1922, all prefectural government bridges were designed for earthquake 8 do - - do . 1933 Yes.... 12 Plate girder _do_. 1927 Yes 16 Concrete do 1935 Yes__ (2) Some of these bridges were also maintained by other agencies of Hiroshima. 17 Plate girder do 1925 Yes 20 Girder I-beam _ do 1921 No (3) NK = Not known. 22 Plate girder do 1925 Yes 24 _ _ _do do 1931 Yes . _ 25 Concrete do 1932 Yes 27 do 1922 No 29 St eel-t russ do .... 1890 No 32 . .do NK No _ 37 Plate girder _ do 1926 Yes 43 48 .do 1920 No Plate girder ..do 1925 Yes... (4) Slight Damage. Damage necessitating a minimum of repair to open the bridge to traffic; structural damage requiring replacement of be- tween 0 and 10 percent of the spans and piers or bents. d. Damage to Timber Bridges. Examination was made of 19 bridges of timber construction, of which 8 were either partly damaged or totally damaged by fire: but 8 (Bridges 6,18, and 48) were initially damaged by blast: 2 (Bridges 88 and 89) were initially damaged by fire and later totally damaged by flood; one (Bridge 40) was severely damaged by fire only; and 2 (Bridges 14 and 84) were totally damaged by fire. Therefore, of the It) timber bridges, 6 (Bridges 28, 82, 86, 48, 46, and 49) were partly or completely damaged by flood, 8 (Bridges 6, 18A, 14, 84, 88, 89, 40, and 43) by fire, 1 (Bridge 21) by blast and flood but initially by blast, and 4 (Bridges 1, 11, 15, and 18) were undamaged. The timber bridges were located from 1,450 feet (Bridge 21) to 9,800 feet (Bridge 1) from GZ. For details and sketches, Figures 19 and 20. (1) Bridge 1 (9,800 feet from GZ and 10,000 feet from AZ) was the most remote bridge studied. This bridge suffered no damage (Photos 1 and 2). (2) Bridge ii (5,870 feet from GZ and 5,780 feet from AZ). The approximate midportion of this bridge was slightly damaged initially by blast and later was totally damaged by fire (Photo 11). (3) Bridge 11 (7,960 feet from GZ and 8,200 feet from AZ) suffered no damage (Photos 19-28). (4) Bridge 13A (4,670 feet from GZ and 5,080 feet from AZ). The span adjacent to the west abutment was slightly damaged initially by blast and later the whole bridge was totally damaged by tire (Photos 81 and 82). (5) Bridge 16 (4,760 feet from GZ and 5,170 feet from AZ) was totally damaged by fire (Photo 38). (6) Bridge 16 (5,580 feet from GZ and 5,900 feet from AZ) suffered no damage (Photo 84). (7) Bridge IS (6,000 feet from GZ and 6,800 feet from AZ) suffered no damage (Photo 87). (8) Bridge 21 (1,450 feet from GZ and 2,460 feet from AZ) was the nearest timber bridge to GZ. This bridge suffered slight structural dam- age. Spans at approximately the bridge center were totally damaged by the blast which also weakened the remaining timber spans, damaged the deck and totally damaged part of the timber railings along both sides of the bridge structure. At a later date this bridge was totally damaged by flood with the exception of part of one span adja- cent to the west abutment (Photo 42). (9) Bridge 28 (4,480 feet from GZ and 4,840 feet from AZ) was totaly damaged by flood (Fig. 19, and Photo 76). (10) Bridge 32 (9,400 feet from GZ and 9,600 feet from AZ). The approximate middle portion of the bridge was severely damaged by flood (Photo 88). (11) Bridge 3If (3,700 feet from GZ and 4,200 feet from AZ) was totally damaged by fire (Photo 90). (12) Bridge 36 (3,200 feet from GZ and 3,760 37 feet from AZ) was totally damaged by flood (Photo 93). (13) Bridge 38 (3,750 feet from GZ and 4,250 feet from AZ). Initially the westerly half of the bridge was severely damaged by fire spreading from adjoining areas and later was totally dam- aged by flood (Photo 95), (14) Bridge 39 ( 3,880 feet from GZ and 4,390 feet from AZ). The easterly half of the bridge was initially moderately damaged by fire spread- ing from adjoining areas and later was totally damaged by flood (Photo 96). (15) Bridge 40 (5,360 feet from GZ and 5,700 feet from AZ). The northerly portion of this bridge was severely damaged by fire (Photo 97). (16) Bridge 42 (5,100 feet from GZ and 5,490 feet from AZ) was totally damaged by flood (Photo 99). (17) Bridge 48 (5,180 feet from GZ and 5,510 feet from AZ). The approximate midspan of this bridge was slightly damaged initially by blast and fire and later was totally damaged by flood (Photo 100). Note.—A new timber bridge was con- structed. (18) Bridge 46 (8,090 feet from GZ and 8,350 feet from AZ) was totally damaged by flood (Photo 103). (19) Bridge 49 (6,380 feet from GZ and 6,650 feet from AZ) was totally damaged by Hood (Photo 106). e. Damage to Reinforced-Cdncrete Bridges. A study was made of 15 rein forced-concrete bridges (3, 4, 5, 7, 8,10, 16, 19, 25, 30, 31, 33, 41, 45, and 52) (Fig. 1). They varied from 1,930 to 12,200 feet from GZ. Bridge 52, 12,200 feet from GZ, was the most remote of all the bridges studied. None of the reinforced-concrete bridges was structurally damaged by the atomic bomb. Sev- eral bridges, however, did suffer superficial damage from bomb effects, such as broken or dam- aged railings, dislodged ornamental posts, caps, and coping curbs. Of the 15 reinforced-concrete bridges, 5 (3, 10, 30, 33, and 45) were damaged by flood only; 3 (4, 8, and 19) suffered superficial damage by blast; 2 (25 and 31) suffered damage by flood and later received superficial damage by blast; and 5 (5, 7, 16, 41, and .52) were undamaged. For sketches, Figures 2-6, inclusive. (1) Bridge 3 (7,130 feet from GZ and 7,390 feet from AZ). The spans and piers adjacent to the south abutment were severely damaged by flood (Photos 4-7). (2) Bridge 4 (6,450 feet from GZ and 6,750 feet from AZ). This bridge suffered no structural damage but received superficial damage from the blast which blew off the northwest corner concrete railings ( Photo 8). (3) Bridge 5 (6,210 feet from GZ and 6,510 feet from AZ) suffered no damage (Photo 10). (4) Bridge 7 (5,200 feet from GZ and 5,570 feet from AZ) suffered no damage (Photo 12). (5) Bridge 8 (5,390 feet from GZ and 5,700 feet from AZ). This bridge suffered no structural damage but received superficial damage from the blast which blew oil' the concrete railings along both sides (Photo 13). (6) Bridge 10 (6,950 feet from GZ and 7,250 feet from AZ). The spans and piers adjacent to the south abutment were moderately damaged by Hood (Photo 18). (7) Bridge 16 (5,750 feet from GZ and 6,100 feet from AZ) suffered no damage (Photo 35). (8) Bridge 19 (4,270 feet from GZ and 4,720 feet from AZ). This bridge suffered no struc- tural damage but received superficial blast damage indicated by dislodged ornamental posts (Photos 38 and 38A). (9) Bridge 25 (5,200 feet from GZ and 5,570 feet from AZ). The fourth bent from the south abutment was completely washed out by Hood, but the bridge continued to carry unrestricted traffic. It also received superficial damage when blast blew off the concrete coping along both sides and slightly damaged the railing balusters directly over each pier (Photo 71 and Fig. 13). (10) Bridge 30 (1,930 feet from GZ and 2,800 feet from AZ), the nearest concrete bridge to GZ, was severely damaged by Hood only (Photos 81—84 and Fig. 16). (11) Bridge 31 (4,570 feet from GZ and 5,000 feet from AZ) suffered severe damage by flood (Photo 87). (12) Bridge 33 (5,300 feet from GZ and 5,650 feet from AZ) suffered severe damage by flood (Photo 89). (13) Bridge 41 (6,150 feet from GZ and 6,460 feet from AZ) suffered no damage (Photo 98). (14) Bridge 45 (7,010 feet from GZ and 7,300 feet from AZ). The spans and bents adjacent to the east abutment were moderately damaged by flood (Photo 102). (15) Bridge 52 (12,200 feet from GZ and 12,450 feet from AZ) suffered no damage. This bridge 38 was the most distant bridge studied from GZ (Photo 110), /. Damage to Steel Bridges. A study was made of 23 steel bridges (2, 5A, TA, 8A, 9, 12, 13, 17, 20, 22, 23, 24, 26, 27, 29, 30A, 35, 36, 37, 44, 47, 48, 50, and 51) which ranged from 260 to 7,600 feet from GZ. Bridge 22 was the nearest to GZ, being only 260 feet therefrom, while Bridge 17 was the most distant steel bridge from GZ. being at 7,600 feet. Of 23 bridges studied, 1 (Bridge 29) was totally damaged by blast; 2 (24 and 30A) suffered slight structural damage by blast; 5 (12, 17, 20, 22, and 23) received superficial blast damage; 5 (9, 26, 27, 50, and 51) suffered no structural damage, but bomb effects were indicated by discoloration of the old paint on the steel members facing the direction of the blast; 1 (13) was initially damaged by blast and later moderately damaged by flood; 1 (37) was severely damaged by flood; 1 (35) was to- tally damaged by flood; and 7 (2, 5A, 7A, 8A, 44, 47, and 48) were undamaged. For sketches, Fig- ures 2-6, inclusive. (1) Bridge 2 (8,480 feet from GZ and 8,740 feet from AZ) suffered no damage (Photo 3). (2) Bridge SA (6,160 feet from GZ and 6,470 feet from AZ) suffered no damage (Photo 10). (3) Bridge 7A (5,240 feet from GZ and 5,600 feet from AZ) suffered no damage (Photo 12). (4) Bridge 8A (5,580 feet from GZ and 5,900 feet from AZ) suffered no damage (Photo 14). (5) Bridge 9 (5,730 feet from GZ and 6,050 feet from AZ) suffered no structural damage but bomb effects resulted in the discoloring of the old paint on the steel members along the south side facing the flash. The north side was unaffected (Photos 15-17 and Fig. 17). (6) Bridge 12 (4,700 feet from GZ and 5,100 feet from AZ). This bridge suffered no structural damage but received superficial blast damage indi- cated by dislodged stone ornamental posts at its southwest corners (Photos 24, 25, and 26). (7) Bridge 13 (4,670 feet from GZ and 5,080 feet from AZ) was damaged by blast and flood. Ini- tially this bridge suffered slight damage by blast, especially to the bents supporting the center por- t ion of the bridge, and to the I-beam girders located at the approximate bridge center. At a later date it was moderately undamaged by flood (Photos 27-30 and Fig, 18). (8) Bridge 17 (7,600 feet from GZ and 8,870 feet from AZ). This bridge suffered no structural damage, but received superficial blast damage, both concrete railings of the main spans being totally damaged. The railings of the approach spans were not damaged by blast (Photo 36). Thiswas the most remote plate-girder bridge from GZ. (9) Bridge 20 (I-beam girder, 2,900 feet from GZ and 8,450 feet from AZ). This bridge suffered no structural damage by blast which, however, dis- lodged ornamental corner posts (photos 39, 40, and 41). (10) Bridge 22 (260 feet from GZ and 2,020 feet from AZ). Of plate-girder design, this was the nearest bridge to the zero points. It had four steel longitudinal girders arched at the center and haunched at their supports. The piers were con- crete, faced with masonry. The roadway deck was of reinforced concrete with asphalt-wearing sur- face. The ornamental stone posts, two at east and west abutments and two at each river pier, were connected by concrete railings (Photo 43A). The bridge suffered no structural damage, although the north faces of the piers showed minor damage due to exposure to the blast. It did, however, receive superficial damage as the concrete railings on both sides were totally damaged and the ornamental posts were dislodged in a direction away from GZ (Photos 43-46 and Fig. 9). It appeared that the girders of the end span had lifted and had been slightly displaced at the abutments. The center span appeared to have been deflected and caused to rebound by the action of the blast which had shaken the entire bridge. Evidence also indicated that the joints of the water main spanning the river between the girders underneath the bridge were slightly damaged. (11) Bridge 23 (860 feet from GZ and 2,170 feet from AZ). This plate-girder bridge suffered no structural damage, but received superficial blast damage totally damaging the concrete railings along both sides. The east railing was blown into the river and the west railing was blown toward GZ onto the roadway deck which indicated the instantaneous and rebound effects of the bomb blast (Photos 48 and 49). The cast-iron posts encased in the concrete railings were sheared off at curb elevation. The railings were anchored quite securely at the concrete deck and curbs. This anchorage was provided by the cast-iron posts which were bolted to the outside girder and spaced 5 feet on centers (Fig. 10 and Photos 48 and 49). The ornamental posts at the southeast and south- west corners of the bridge were slightly dislodged. The longitudinal girders received no damage and 39 there was no indication of displacement of the abutment at the south end of the bridge. The longitudinal girders abutting the south face of Bridge 24 were of cantilever design and showed no indication of deformation (Photos 47 and 70). (12) Bridge (1,000 feet from GZ and 2,230 feet from AZ) was located at the intersection of the Ota and Motoyasu Rivers (Photo 70). This bridge of plate-girder design received physical damage of a spectacular and interesting nature but it continued to carry unrestricted highway, pedestrian, and street railway traffic. The longi- tudinal steel girders suffered no great structural damage although a slight lateral deformation in- dicated that they had been highly stressed. It was also apparent that the bridge had first been de- pressed by the blast, and then the girders re- bounded upward due to the elastic quality of the steel. Apparently the reflection of the blast wave from the river and the rebounding action raised the roadway and sidewalk slabs from their sup- porting girders and also moved them laterally at the west end spans of the bridge (Photos 58 and 69) in a direction away from the blast. Although the girders were subjected to large and unusual stresses, the elastic limit of the material was not greatly exceeded. The longitudinal girders, how- ever, did suffer slight deflection, especially those girders under the concrete walk adjacent to the east abutment where they were deflected approxi- mately 2 to 3 inches downward at the center of the span (Photos 62 and 63), and there was a slight lateral deflection (Photos 53, 66, and 67). The girders at the west abutment showed an indication of deformation (Photo 64). The longitudinal girders of the fourth and fifth spans from the east abutment underneath the north walk were slightly deformed laterally and vertically, indicating that stresses were built up in the web-plate and bottom flanges at the piers. The concrete railings were totally damaged. The cast-iron posts encased in the concrete railings were sheared off at curb level, apparently as a result of severe shock effects pro- duced by the blast. The railings were anchored securely to the concrete deck and curbs. This an- chorage was provided by the cast-iron posts which were bolted to the outside girder and spaced 6 feet on centers ( Photo 61). Other interesting damage features occurred at Bridge 24, such as damaged walks, roadway deck, and granite curbs. These damage features resulted from the shifting of the roadway deck laterally and vertically due to bomb effects. The concrete walk along the north side was pushed approximately 3 feet above its sup- porting members over the center span (Photo 65). Along the north gutter, the scupper drains were left approximately 2 feet above the roadway be- cause the deck was raised so high off the steel and shifted so far that the scupper pipes hit on girders in falling (Photos 54, 55, 57). Approximately at the bridge center the roadway deck was shifted laterally 15 inches north and raised approximately 14 inches above its original position (Photos 54, 55, 57, and 65). When raised and shifted laterally, the edge of the slab landed on the sidewalk-sup- porting steel which was at a higher elevation (Figs. 11 and 12). Also at approximately bridge center (opposite Bridge 23) the rails of the south street railway track were raised about 8 inches above their original position. This movement was caused by reflected blast which, however, did not affect Bridge 23 because of the nonrigid connection of the cantilever span abutting the south face of Bridge 24 (Photo 60). The southwest area of Bridge 24 was also affected by blast which raised the concrete walk approximately 20 inches above its original elevation and displaced the granite curb laterally 9y2 inches north from its original position. The roadway concrete deck, concrete walk, and granite curb at the northwest corner of the bridge (Photo 59) were also damaged by blast. The shifting of the bridge deck caused a slight lat- eral deflection in the street railway rails at the east end of the bridge (Photo 68) and also moved the rails laterally 15 inches to the north from their original position at the west end of the bridge (Photo 69). The ornamental stone caps at the cor- ners of Bridge 24, with the exception of the south- east posts, were dislodged by the bomb effects (Fig. 12 and Photo 70). It was learned through interro- gation that at the time of the blast approximately 300 Japanese soldiers and many civilians were crossing the bridge and all were hurled into the river. (13) Bridge 26 (5,750 feet from GZ and 6,100 feet from AZ) suffered no structural damage. The bomb effects, however, discolored the old paint on the steel members along the south side facing the direction of flash. The north side was unaffected (Photos 72, 73, 74). (14) Bridge 27 (4,360 feet from GZ and 4,790 feet from AZ) suffered no structural damage, but the bomb effects discolored the old paint on the steel members along the east side. The members 40 along the west side were less affected (Photo 75). The bridge was of tied-arch single-span construc- tion. (15) Bridge 29 (1,190 feet from GZ and 2,310 feet from AZ), a pin-connected steel truss, was totally damaged by blast. Only stone-faced con- crete piers and abutments remained. The blast forces reflected from the water struck the bridge from below and caused an uplift, while the blast striking along the sides caused overturning and failure of the structure which collapsed into the river downstream (Fig. 14). The approximate center height of the trusses was 13 feet above road- way grade. Interrogation indicated that this bridge was approximately 55 years old. It was a highway bridge of very light construction with timber deck and asphalt-wearing surface, and was in fair condition (Photos 77-80). (16) Bridge 30A (1,880 feet from GZ and 2,750 feet from AZ) suffered slight damage by blast. This bridge, known as the Shinobashi Aqueduct, carried a 16-inch water main. It was the nearest steel water crossing to GZ. It was a bow-string truss, built of light, steel angle members, and was supported on concrete piers. The blast caused slight deformation of the truss members. The members adjacent to the west abutment were most severely affected by the blast, and evidence indi- cated that the deformation of the members was caused by direct blast forces rather than by forces reflected from the water (Photos 85 and 86). (17) Bridge 35 (3,190 feet from GZ and 3,750 feet from AZ) was totally damaged by flood (Photos 91 and 92). (18) Bridge 37 (3,220 feet from GZ and 3,770 feet from AZ) suffered severe damage by flood which destroyed one pier and two spans adjacent to the west abutment (Photo 94). (19) Bridge 44 (5,300 feet from GZ and 5,650 feet from AZ) suffered no damage (Photo 101). (20) Bridge 4? (7,450 feet from GZ and 7,700 feet from AZ) suffered no damage (Photo 104). (21) Bridge 4$ (7,130 feet from GZ and 7,400 feet from AZ) suffered no damage (Photo 105). (22) Bridge 50 (6,580 feet from GZ and 6,900 feet from AZ) suffered no structural damage, and the only bomb effect noted was discoloration of the old paint on the steel members along the south side facing the direction of flash. The north side was unaffected (Photo 107). (23) Bridge 51 (6,450 feet from GZ and 6,780 feet from AZ) suffered no structural damage. The only indication of bomb effect was discoloration of the old paint on the steel members along the south side facing the direction of flash. The north side was unaffected (Photos 108 and 109). g. Recapitulation of Damage to Steel Bridges. The 23 steel bridges accommodated 4 types of traf- fic, with the exception of 3 bridges which carried water crossings, (1) Railroad Bridges. Of the total number of steel bridges, five were railroad bridges carrying a double-track (Bridges 8A, 9, 20, 50, and 51). Bridge 2 carried a single track railroad. These bridges were located from 5,730 feet to 8,480 feet from GZ, Bridge 2 being the most distant. They were built-up, plate-girder sections and suffered no damage. (2) Aqueducts. Three of the total number of steel bridges were used as water crossings. Of these, Bridge 30A was slightly damaged by blast. The others (Bridges 5A and 7A) suffered no dam- age (Photos 10, 12, and 85). Bridge 30A was the nearest aqueduct to GZ. (3) Street Railway Bridges. There were 4 steel, street-railway bridges of rolled I-beam sections supported by H-column bents with diagonal brac- ing. These were Bridges 13, 35, 44, and 47, which carried double-track, street-railway traffic. Of these, 1 was completely destroyed by Hood. One was initially damaged by blast and later moder- ately damaged by flood. Two suffered no damage These bridges were located at 4,670 to 7,450 feet from GZ, Bridge 47 being the most distant. (4) Highway Bridges. Ten of the total num- ber of steel bridges studied carried highway traffic. Of the 10, 1 (Bridge 27), a tied-arch, suffered no damage; 1 was a pin-connected steel truss (Bridge 29) which was totally damaged by blast; one was an I-beam girder section with angle stiffeners sup- ported by H-column bents with diagonal bracing (Bridge 20), which suffered only slight superficial damage, and the remaining seven (Bridges 12, 17, 22, 23, 24, 37, and 48) were built-up, plate- girder sections supported on concrete piers. These bridges were located from 260 to 7,600 feet from GZ. Bridge 17 was the most remote high- way, plate-girder bridge from GZ. Of these, 4 (Bridges 12, 17, 22, and 23) received superficial damage, and 1 (Bridge 24) received slight struc- tural damage by blast. Bridge 37 was severely damaged by flood. Bridge 48 suffered no damage. h. Resume of Fire Damage to Bridges. Fire damaged eight timber bridges and was the cause 41 of negligible damage to two steel bridges. There was no fire damage to concrete bridges. The eight timber bridges were ignited by tire spread from nearby combustible areas. (1) Thirteen of the nineteen timber bridges studied (6, 13A, 14, 15, 18, 21, 28, 34, 36, 38, 39, 40, and 43) (Fig. 20) were within the burned-over area. Of tbe 13, 7 were totally or partly damaged by fire on the day of the attack, and 1 other was partly damaged by fire 3 days later. One end of Bridge 42, a timber structure, was adjacent to tbe burned-over area, but sustained no fire damage. The 5 timber bridges (1, 11, 32, 46, and 49) which were outside and not adjacent to the burned-over area were not fire damaged. (2) Timber Bridges 6, 13A, and 43 were dam- aged initially by blast and later ignited by burning buildings and totally damaged. The other timber bridges which burned had not been blast damaged. Bridges 14 and 34, ignited by burning buildings at both ends were totally damaged. Thirty percent of the east section of Bridge 39 was totaly damaged by fire which spread to it from burning buildings at the east end. Fifty-five percent of the north end of Bridge 40 was totally damaged by fire which spread to it from burning buildings at the north end. (3) Timber Bridge 38 was neither damaged by blast nor by fire on the day of the attack, but 3 days later 50 percent of the westerly portion of the bridge was totally damaged by fire which was set by embers blown from the still smoldering, burned-over area only 20 feet from its west end. (4) There was one steel bridge with a wooden deck (Bridge 37) located within tbe burned-over area. This bridge was undamaged by fire. (5) There were two street railway Bridges (13 and 44) and two railroad Bridges (9 and 26) of steel construction with wooden ties, within, or adjacent to, the burned-over area. Bridges 13 and 44 sustained no fire damage, whereas Bridge 26 sus- tained slight flash-burn damage. It was reported that several freight cars burned on Bridge 9 as a result of direct ignition of the cars or their contents by radiated heat from the atomic bomb. Only a few wooden ties were charred and it is possible that they were burned by hot coals dropped previously by locomotives. On Bridges 9 and 26, red paint on the side of steel girders which faced AZ was dis- colored by radiated heat. Steel bridges were other- wise undamaged by fire. (6) Concrete bridges sustained absolutely no fire damage. i. Recapitulation and Summation of Bridge Damage. The damage resulting from many causes and occurring at different times had left a damage analysis problem of considerable com- plexity at Hiroshima. The cause and extent of damage to the bridge system by the atomic bomb has been segregated from other damage and is summarized in Table -1. j. Samples and Laboratory Testing of Mate- rial*. Samples of two cast-iron, railing-post sec- tions from Bridges 23 and 24 (Sample I)) and also paint samples from Bridges26 and 27 (Sample B) were secured for tests by tbe Bureau of Standards as follows: Sample B. Paint samples from Bridges 26 and 27. (1) Chemical analysis and comparison of sam- ples exposed and unexposed to bomb effects. (2) Opinion as to agencies causing change, if any, in composition. Sample D. Two cast-iron, railing-post sections. (1) Determine tensile, compressive, and shear strengths. (2) Test for hardness. (3) Metallurgical analysis. To date results have been received on Sample D only: “Sample 1), Two Cast-Iron, Railing-Post Sections. These were identified as being one from Bridge 23, and one from Bridge 24. Specimens for tension, compression, and torsion tests were machined from each section and tested. Tbe re- sults, together with the hardness numbers and chemical composition, follow: Bridge 23 Bridge 24 Sample; Tensile strength, Ib/in 2 19, 700 22, 700 Compressive strength, Ib/in 2_ 72, 200 69, 100 Modulus of rupture for torsion, Ib/in 2_. 2(5, 500 27, 300 Rockwell indentations num- ber B80-B90 B75-B85 Chemical composition: C, percent . _ 3. (57 3. 71 Mn, percent . 29 . 22 P, percent . . 17 . 14 S, percent_ . 13 . 11 Si, percent 1. 35 1. 26 2 Pounds per square inch. A STM Spec. A48—41 for Gray Iron Castings classifies cast irons by minimum tensile strength. These rails correspond to Class 20, tbe classifica- 42 tion of lowest tensile strength. Spec. A48-41 does not provide for compression or torsion strengths, nor for chemical analysis. However, the relation- ships among the tensile, compressive, and shearing strengths are about the same as in domestic cast irons of this class, and the carbon content is perhaps somewhat higher, and the silicon and manganese contents considerably lower than in most compar- able cast irons.” 4. Recommendations and Conclusions a. The Bridge System. The bridge system was satisfactory and adequate to accommodate the serv- ice, utility, communication, and transportation sys- tems of Hiroshima. The bridges were conveniently located for efficient travel between islands and mainland. Certain bridges were essential for car- rying services and utility lines across the several branches of the Ota River to the many districts of the city. Neglect in planning to provide pro- tection for approaches and ends from flimsy, wooden buildings, rather than any direct physical damage from the atomic bomb, deprived the in- habitants of their use after the attack until relief parties cleared away the debris from fire and blast. I). Design, Construction Features, Materials and Loading. In general, design, details, and arrange- ments for timber, concrete, and steel bridges ap- peared to be below United States standards except for the steel-plate girder bridges for railroads and steel-truss aqueducts which compared favorably with similar structures in the United States. In size, and appearance the steel employed in bridge structures was comparable with United States standards; otherwise, the quality of materials ap- peared to be below that used in the I nited States for similar structures. Generally the bridges were designed to carry lower loadings than American types. c. Timber Bridges. The timber bridges (1,450 to 9,800 feet from GZ) generally were of poor con- struction by American standards. They con- sisted of many spans of log girders simply sup- ported on multilog-pile bents. Although they were simple in design, low in cost, rapidly and eas- ily erected and repaired, and built of material which was relatively plentiful, they were not sturdy, and fire and blast easily destroyed them. Data indicated that the timber bridges were vul- nerable and were less resistant to the atomic bomb than concrete and steel. Based on four bridges, using the average circle of damage method, the mean area of effectiveness of the bomb in causing structural damage by blast to timber pile bridges was 2.4 square miles with a mean effective radius of 4,600 feet. d. Steel Bridges (260 to 7,600 feet from GZ) were either of built-up, plate-girder sections or standard, rolled-steel sections. Analysis of the data showed the amount of structural damage to steel bridges caused by bomb effects to be relatively small. One bridge (a pin-connected steel truss) was, however, totally damaged by blast. This was a very old bridge about 1,190 feet from GZ and because of its design and age, was an easy victim of the atomic bomb. Although three of the steel bridges were within 1,000 feet of GZ they suffered little or no structural damage. The su- perficial and minor damage to them was confined largely to the reinforced-concrete decks, side- walks, railings and ornamental features. There was no evidence which would point to high tem- peratures as the cause of damage. Several bridges, however, located from 4,360 to 6,580 feet from GZ, were affected by radiant heat to an ex- tent which caused discoloring of the old paint on the steel members facing the direction of the flash. It is concluded that all damage to steel bridges was caused by blast. The mean area of effective- ness of the atomic bomb dropped at Hiroshima was zero for causing structural damage to steel-girder bridges similar to those included in this study. The pin-connected truss bridge totally damaged by blast at 1,190 feet from GZ was judged to be unreliable as a source of data for conclusions on resistance to the bomb. e. Reinforced-Concrete Bridges (1,930 to 12,200 feet from GZ) showed a striking lack of uni- formity in design and in quality of materials. A few whose superstructures were supported on concrete piers appeared more massive than similar structures in the United States. Other concrete bridges, generally supported on concrete bents, were estimated to be below United States stand- ards in design loads. The nearest concrete bridge to GZ (1,930 feet) was Bridge 30 which suffered severe flood damage subsequent to the atomic- bomb attack. Insofar as could be determined by interrogation and post-attack air cover, however, the bridge was open to highway traffic after the attack and was not structurally damaged, although possibly weakened by the atomic bomb. There- fore, the only specific evidence of damage to con- crete bridges was the superficial damage from blast to 5 bridges, 4,270 to 6,450 feet from GZ. 43 Thus, from an analysis of data, it is concluded that reinforced-concrete bridges were the most effective of all types in withstanding the effects of the atomic bomb. This conclusion is consistent with that of the Building Damage Section of this report which found that “multistory, earthquake-resist- ant, reinforced-concrete buildings located near the zero point suffered moderate to negligible struc- tural damage.” Since the bridges were normally designed to withstand heavier loads than the buildings, and some were earthquake resistant, it is improbable that they would have been structur- ally damaged even though located nearer GZ. Accordingly it is concluded that for the atomic bomb and height of burst employed at Hiroshima the MAE was zero for causing structural damage to reinforced-concrete girder bridges. /. Damage Features. It was believed that damage to ornamental features (posts, caps, cop- ings, curbs, and railings), with the possible ex- ception of those bridges within 1,000 feet of GZ, was due largely to inferior design. These par- ticular parts of the bridges were those most se- verely damaged by blast. g. Different degrees of blast damage caused to bridge railings and ornamental features appeared in regular concentric areas around GZ. This regu- lar pattern of damage was due to the absence of topographical obstructions which might have pro- tected any particular areas from the blast. At long distances, where the blast was traveling in an almost horizontal direction, damage was inflicted principally on railings facing the flash. Buildings adjacent to bridges, however, provided some shielding for the structures, especially for orna- mental features. h. It was assumed that forces initially origi- nated at AZ were shock forces radiating from that point. This assumption was strengthened by the positions of the railings of Bridge 28, 860 feet from GZ, which fell toward the point of detonation of the bomb. This indicated that these positive forces probably weakened the railings, and negative forces (toward GZ) lasting over a longer period of time completed the collapse. The negative phase, although probably much less powerful than the positive phase, was credited with causing the railings to fall toward GZ. i. It was further concluded that if the sidewalks, decks, and railings had been strongly anchored to the structural members, the damage would have been greatly decreased. On the other hand, it was recognized that the “floating'’ decks, if exposed to a more powerful blast weapon, might decrease structural damage to beams and girders by reduc- ing the loads from blast, especially from blast forces reflected onto the underside of the deck. It is evident that if the concrete deck were boxed around the steel members, as in American practice, powerful enough forces would lift the slabs and steel members as a unit with the probability of severe structural damage. It is recommended therefore that deck structures be simply supported on steel members, and designed only to transmit downward loads to the structural beams and girders. j. Since destruction caused by the atomic bomb was largely associated with fire, comparatively lit- tle structural damage was caused to the noncom- bustible targets such as steel and concrete bridges. No evidence was found of spalled concrete or oxidized steel which would point to fire as the cause of damage. k. Had the atomic bomb been released closer to GZ. the results of the intense heat and increased pressure would probably have been more destruc- tive to those bridges located within 1,000 feet of GZ. l. The relatively small amount of structural damage inflicted on the noninflammable bridges studied indicated that in order to destroy such structures higher temperatures and more powerful forces must be developed. 44 Table 4.—Recapitulation of bridge damage Timber bridges Concrete bridges Steel bridges Damage Number Area damage (square feet) Percent Number Area damage (square feet) Percent Number Area damage (square feet) Percent Remarks Structure, blast 1 1, 940 0 20 0 0 0 4 8 165 20 Superficial, blast 0 0 5 0 0 5 0 0 Broken railings, curbs, copings, and dis- lodged members. Blast- 1, 740 15, 700 Mixed Fire, 3 100 0 0 0 0 0 0 Do 5 19, 720 66 0 0 0 0 0 0 Total damaged area. 9 39, 100 68 5 0 0 9 8, 165 8 Total area of damaged 9 57, 130 48 5 54, 570 42 9 98, 340 47 bridges. Total area of undam- aged bridges.* 10 62, 010 52 10 74, 640 58 14 112, 410 53 Total Percent damaged of total area. 19 119, 140 100 33 15 129, 210 100 0 23 210, 750 100 4 * Included are nine timber, respectively. seven concrete, and three steel bridges which were damaged by either flood or typhoon, or both, on 17 Sept, and 5 Oct. 1945 SUMMATION 45 PHOTO 1-XII. Bridge 1. Looking west at east side of undamaged bridge over the Enko-Gawa. PHOTO 2-XII. Bridge 1. Northeast corner of north abutment of undamaged bridge (9,800 feet to GZ, 10,000 feet to AZ). 46 PHOTO 3X11. Bridge 2. East elevation of single-track, railroad bridge over the Enko-Gawa (8,480 feet to GZ, 8,740 feet to AZ). PHOTO 4-XII. Bridge 3. Looking west at flood-damaged, highway bridge over the Enko-Gawa. Water main carried by bents (7,130 feet to GZ, 7,390 feet to AZ). 47 PHOTO 5-XII. Bridge 3. Reinforcing steel exposed at section of break in deck girder. 48 PHOTO 6-XII. Bridge 3. Damaged concrete girder. 49 PHOTO 7-XII. Bridge 3. Steel reinforcement in concrete deck. PHOTO 8-XII. Bridge 4. North elevation of reinforced-concrete bridge over the Enko-Gawa. Superficial blast damage at northeast corner railing (6,450 feet to GZ, 6,750 feet to AZ). 50 PHOTO 9-XII. Bridge 4. Southeast corner of cast abutment PHOTO 10-XII. Bridge 5. Looking north at reinforced-concrete bridge over the Enko-Gawa. Note Bridge 5A (steel truss) north of Bridge 5 (6,210 feet to GZ, 6,510 feet to AZ) undamaged. 51 PHOTO 11-XII. Bridge 6. Looking south at remains of bridge over Enko-Gawa. Destroyed by blast and fire (5,370 feet to GZ, 5,730 feet to AZ). PHOTO 12-XII. Bridges 7 and 7A. Looking west between reinforced-concrete, undamaged highway bridge and steel-truss aqueduct over the Kyobashi-Gawa (5,200 feet to GZ, 5,570 feet to AZ). 52 1HOK) 13 XII. Bridge 8. South elevation of bridge over Kyobashi-Gawa. Superficial blast damage to concrete railings (5,390 feet to GZ, 5,700 feet to AZ). PHOTO 14-XII. Bridge 8A. Looking north at undamaged, steel, I-beam railroad bridge (5 580 feet to GZ, 5,900 to AZ). 53 PHOTO 15-XH. Bridge 9. South elevation of undamaged, double-track railroad bridge over the Kyobashi-Gawa. PHOTO 16-XI1. Bridge 9. Paint on south elevation of steel girders discolored by exposure to bomb effects (5,730 feet to GZ, 6,050 feet to AZ). 54 PHOTO 17-XII. Bridge 9. Paint on north elevation of steel girders unaffected by bomb. PHOTO 18-XII. Bridge 10. East elevation of bridge over Kyobashi-Gawa showing flood damage (6,950 feet to GZ, 7,250 feet to AZ). 55 PHOTO 18-XII. Bridge 11. Looking southwest at corner of north abutment (7,960 feet to GZ, 8,200 feet to AZ). 56 PHOTO 20-XII. Bridge 11. Cable-tied vertical member of west suspension cable. 57 PHOTO 21-XII. Bridge 11. Looking west at east suspension cables of undamaged bridge over the Kyobashi-Gawa (7,960 feet to GZ, 8,200 feet to AZ). 58 PHOTO 22-XII. Bridge 11. Underside of deck structure. 731568—17 5 59 PHOTO 23-XII. Bridge. Cable-tied vertical member of west suspension cable. PHOTO 24-XII. Bridge 12. South elevation of bridge over Kyobashi-Gawa (4,700 feet to GZ, 5,100 feet to AZ). 60 PHOTO 25-X1I. Bridge 12. Ornamental stone post at southwest corner dislodged by blast (4,700 feet to GZ, 5,100 feet to AZ). 61 PHOTO 26-XII. Bridge 12. Ornamental stone post at southeast corner dislodged by blast (4,700 feet to GZ, 5,100 feet to AZ). 62 PHOTO 27-XII. Bridge 13. Timber cribbing under trolley tracks at fourth span from east abutment of blast-and flood-damaged bridge over the Kyobashi-Gawa (4,670 feet to GZ, 5,080 feet to AZ). 63 PHOTO 28-XIJ. Bridge 13. Looking west at cribbing under trolley tracks at fifth span from east abutment. 64 PHOTO 29-XII. Bridge 13. South elevation of trolley bridge. PHOTO 30-XII. Bridge 13. Flood and blast damage (4,670 feet to GZ, 5,080 feet to AZ) north elevation. 65 PHOTO 31-XII. Bridge 13-A. Looking east at totally damaged timber bridge by blast and fire over the Kyobashi-Gawa. PHOTO 32-XII. Bridge 13A. Totally damaged by blast and fire (4,670 feet to GZ, 5,080 feet to AZ.) 66 PHOTO 33-XII. Bridge 14. West abutment of bridge over the Kyobashi-Gawa, totally damaged by tire (4,760 feet to GZ, 5,170 feet to AZ). PHOTO 34-XII. Bridge 15. Looking south at undamaged bridge over the Kyobashi-Gawa (5,580 feet to GZ, 5,900 feet to AZ). 67 PHOTO 35-XII. Bridge 16. North elevation of undamaged, reinforced-concrete, highway bridge over the Kyobashi-Gawa (5,750 feet to GZ, 6,100 feet to AZ). PHOTO 36-XII. Bridge 17. Looking south at street railway and highway plate-girder bridge over the Kyobashi-Gawa. Superficial blast damage to railings (7,600 feet to GZ, 8,870 feet to AZ). 68 PHOTO 37-XII. Bridge 18. Undamaged highway bridge over the Motoyasu-Gawa (6,GUO feet to GZ, 6,300 feet to AZ). PHOTO 38-XTI. Bridge 19. North elevation of highway bridge over the Motoyasu-Gawa. Ornamental stone posts dislodged by blast (4,270 feet to GZ, 4,720 feet to AZ). 69 PHOTO 38A-XII. Pre-attack panoramic view of Hiroshima looking north, showing Bridges 19 and 20 in upper right and 31 in upper left. 70 PHOTO 39-XII. Bridge 20. Looking south at slight blast damage to northwest area of bridge over the Motoyasu-Gavva. PHOTO 40~XII. Bridge 20. South elevation. Debris deposited against bents by flood (2,900 feet to GZ, 3,450 feet to AZ). 71 PHOTO 41-XII. Bridge 20. Blast damage to north railing. Note flash burn on asphalt surface of bridge deck (2,900 feet to GZ, 3,450 feet to AZ). 72 PHOTO 42-XT [. Bridge 21. Southwest part of bridge over the Motoyasu-Gawa totally damaged by blast and flood (1,450 feet to GZ, 2,460 feet to AZ), 73 PHOTO 43-XII. Bridge 22. Pre-attack .Ta])anese photo showing south elevation. Nearest bridge to GZ, 260 feet. PHOTO 43A-XII. Bridge 22. Superficial blast damage to bridge over the Motoyasu-Gawa (260 feet to GZ, 2,020 feet to AZ). 74 PHOTO 44-XII. Bridge 22. North elevation. No structural damage. PHOTO 45-XII. Bridge 22. Stone posts and railing damaged by blast (260 feet to GZ, 2,020 feet to AZ). 731508- 47 0 75 PHOTO 46-XII. Bridge 22. Blast damage and flash-burn to ornamental stone post (260 feet to GZ, 2,020 feet to AZ). 76 PHOTO 47-XII. Bridge 23. Looking east at west elevation. Note cantilever span adjacent to Bridge 24, over the Ota-Gawa. PHOTO 48-XII. Bridge 23. Cast-iron post sections and concrete railing sheared off east curb by blast (860 feet to GZ, 2,170 feet to AZ). 77 PIK) I () 49-.\ II. Bridge 23. Cast-iron post sections and concrete railing along west curb damaged by blast (860 feet to GZ, 2,170 feet to AZ). 78 PHOTO 50-XII. Bridge 24. North elevation of bridge over Ota-Gawa. Concrete walk and railing damaged by blast. PHOTO 51-XII. Bridge 24. Southeast part of bridge over Ota-Gawa. Railing damaged by blast (1,000 feet to GZ, 2,230 feet to AZ). 79 PHOTO Bridge 24. Blast damage to southwest area. Concrete walk raised 20 inches above original road grade. Granite curb moved inches north from original position (1,000 feet to GZ, 2,230 feet to AZ). 80 PHOTO 53-XII. Bridge 24. North elevation adjacent to east abutment. No structural damage to steel- plate girders. 81 PHOTO 54—XII. Bridge 24. Portion of north granite curb and walk. Drain scupper west of Bridge 23, elevated 20 inches above road grade by blast effects. PHOTO 55-XII. Bridge 24. Portion of north granite curb and walk. Drain scupper east of Bridge 23, elevated 24 inches above road grade by blast effects (1,000 feet to GZ, 2,230 feet to AZ). 82 PHOTO 56-XII. Bridge 24. North concrete walk pushed by blast effects 38 inches above cross-steel members sup- porting the north walk (1,000 feet to GZ, 2,230 feet to AZ). 83 PHOTO 57-XII. Bridge 24. Blast effects moved roadway slat) laterally 15 inches north and raised it 14 inches above original position. Note pushed-np scupper (1,000 feet to GZ, 2,230 feet to AZ). 84 PHOTO 58-XII. Bridge 24. Northwest corner of bridge showing blast damage to concrete walk, granite curb and roadway concrete deck. PHOTO 59-XII. Bridge 24. Northeast corner of bridge showing blast damage to concrete walk and granite curb (1,000 feet to GZ, 2,230 feet to AZ). 85 PHOTO 60-XII. Bridge 24. Intersection of Bridges 23 and 24. Rails of south railway tracks pushed up 8 inches above original road grade by blast. PHOTO 61-XII. Bridge 24. Blast-damaged, cast-iron post sections at northwest corner of intersection of Bridges 23 and 24. Post sections 5 feet on centers for concrete railings of Bridge 23, and 6 feet on centers for Bridge 24 (1,000 feet to GZ, 2,230 feet to AZ). 86 PHOTO 62-XII. Bridge 24. Northeast corner of steel-plate girder. No structural damage by blast. PHOTO 63-XII. Bridge 24. Underside of steel-plate girders and cross-members of west abutment. No structural damage (1,000 feet to GZ, 2,230 feet to AZ). 87 PHOTO 64 XII. Bridge 24. Underside of steel-plate girders and cross-members at west abutment. No structural damage. 88 PHOTO 65-XII. Bridge 24. Secondary framing of exterior girder under north walk at approximate bridge center. No structural damage. 89 PHOTO 66-XII. Bridge 24. Inside faces of plate girders, fourth span from east abutment under north walk. De- flected slightly by blast (1,000 feet to GZ, 2,230 feet to AZ). 90 PHOTO 67-XII. Bridge 24. Inside faces of plate girders, .fifth span from east abutment under north walk. Deflected slightly by blast (1,000 feet to GZ, 2,230 feet to AZ), 7;{ir»fiS—47 7 91 PHOTO 68-XII. Bridge 24. East end of bridge. Slight deflection in trolley rails due to shifting of bridge deck by blast. PHOTO 69-XII. Bridge 24. West end of bridge. Streetcar rails moved laterally 15 inches to the north when blast effects shifted bridge deck (1,000 feet to GZ, 2,230 feet to AZ). 92 PHOTO 70-XI1. Intersection of Bridge 23 (left) and Bridge 24 (right). All damage from blast effects. Bridge 23 (860 feet to GZ, 2,170 feet to AZ). Bridge 24 (1,000 feet to GZ, 2,230 feet to AZ). 93 » PHOTO 71-XI1. Bridge 25. West elevation of bridge over Ota-Gawa. Flood damage and superficial damage to concrete coping by blast (5,200 feet to GZ, 5,570 feel to AZ). PHOTO 72-X1I. Bridge 26. South elevation of undamaged, double-track railroad bridge over Ota-Gawa (5,750 feet to GZ, 6,100 feet to AZ). 94 PHOTO 73-XII. Bridge 26. Paint on the south elevation of girders discolored by exposure to bomb effects. PHOTO 74-XII. Bridge 26. Paint on the north elevation of girders unaffected by bomb effects (5,750 feet to GZ, 6,100 feet to AZ). 95 PHOTO 75-XII. Bridge 27. West elevation of undamaged bridge over the Temma-Gawa. Paint on the members of the east elevation were discolored by exposure to bomb effects. Steel members of west elevation were only slightly discolored (4,360 feet to GZ, 4,790 feet to AZ). PHOTO 76-XII. Bridge 28. Remains at north abutment of bridge over the Temma-Gawa. Totally damaged by flood (4,430 feet to GZ, 4,840 feet to AZ). 96 PHOTO 77-XII. Bridge 29. Looking north at remains of bridge over the Ota-Gawa. Totally damaged by blast PHOTO 78-XII. Bridge 29. Southwest corner. Totally damaged by blast (1,190 feet to GZ, 2,310 feet to AZ) 97 PHOTO 79-XII. Bridge 29. East abutment. Bridge totally damaged by blast (1,190 feet to GZ, 2,310 feet to AZ). 98 PHOTO 80 XII. Bridge 29. Looking east at debris at west abutment (1,190 feet to GZ, 2,310 feet to AZ). 99 PHOTO 81-XII. Bridge 30. Looking north at flood damage to highway bridge over the Ota-Gawa, (Note Bridge 30-A, aqueduct.) PHOTO 82-XII. Bridge 30. Fractured roadway deck and longitudinal beams. Note reinforcing steel and construction joint at junction of beams and slab. 100 PHOTO 83-XI1. Bridge 30. Steel reinforcement in fractured con- crete girder. 101 PHOTO 84-XII. Bridge 30. Fractured roadway deck and girder. Note reinforcing steel. 102 PHOTO 85-XII. Bridge 30~A. North elevation of aqueduct for 16-inch main over the Ota-Gawa Slightly damaged by blast. PHOTO 86-XII. Bridge 30-A. Looking northeast at corner of west abutment. Steel truss slightly damaged by blast. Note damaged covering of 16-inch water main (1,880 feet to GZ, 2,750 feet to AZ). 103 PHOTO 87-XII. Bridge 31. Looking south at flood-damaged, highway bridge over the Ota-Gawa. Sixteen-inch water main carried by bents. Top portion of northwest corner post dislodged by blast (4,570 feet to GZ, 5,000 feet to AZ). PHOTO 88-XII. Bridge 32. Looking north at flood-damaged highway bridge over the Temma-Gawa (9,400 feet to GZ, 9,600 feet to AZ). 104 PHOTO 89-XII. Bridge 33. Looking west at flood-damaged bridge over the Temma-Gawa, Sixteen-inch water main carried by bents (5,300 feet to GZ, 5,650 feet to AZ). PHOTO 90-XII. Bridge 34. Looking west at timber bridge over the Temma-Gawa. Total damage by fire (3,700 feet to GZ, 4,200 feet to AZ). 105 PHOTO 91-XII. Bridge 35. Looking north at east abutment of bridge over the Temma-Gawa. Totally damaged by flood. PHOTO 92--XI1. Bridge 35. West abutment of trolley bridge. Totally damaged by flood (3,190 feet to GZ, 3,750 feet to AZ). 106 PHOTO 93-XII. Bridge 36. East and west abutment of bridge over the Temma-Gawa, Totally damaged by flood (3,200 feet to GZ, 3,760 feet to AZ). PHOTO 94-XII. Bridge 37. Looking north at plate girder, wooden-deck, highway bridge over the rJ emma-Gawa. Westerly portion severely damaged by flood. Sixteen-inch water line carried by brackets along south side (3,220 feet to GZ, 3,770 feet to AZ). 7315G8—47 S 107 PHOTO 95-XII. Bridge 38. Looking west at remains of timber bridge over the Temma-Gawa. Severely damaged by fire (west half) and later totally damaged by flood (3,750 feet to GZ, 4,250 feet to AZ). PHOTO 96-XII. Bridge 39. Looking northwest at remains of timber bridge over the Temma-Gawa Severely damaged by fire (easterly ]i) and later totally damaged by flood (3,880 feet to GZ, 4,390 feet to AZ). 108 PHOTO 97-XII. Bridge 40. Looking west at bridge over the Fukushima-Gawa. Northerly portion severely damaged by fire (5,360 feet to GZ, 5,700 feet to AZ). PHOTO 98-XII. Bridge 41. Looking west at undamaged concrete bridge over canal connecting the Yamate- Gawa and the Fukushima-Gawa (6,150 feet to GZ, 6,460 feet to AZ). 109 PHOTO 99-XTI. Bridge 42. Looking west at remains of timber bridge over the Fukushima-Gawa Totally damaged by flood (5,100 feet to GZ, 5,490 feet to AZ). PHOTO 100-XII. Bridge 43. North elevation of newly constructed timber bridge over the Fukushima- Gawa. Old bridge was totally damaged by blast and fire (5,180 feet to GZ, 5,510 feet to AZ). no PHOTO 101-XII. Bridge 44. Southeast part of undamaged, street railway bridge over the Fukushima- Gawa (5,300 feet to GZ, 5,650 feet to AZ). PHOIO 102-XII. Bridge 45. Looking northwest at the southeast area of the concrete highway bridge over the Fukushima-Gawa. Moderately damaged by flood (7,010 feet to GZ, 7,010 feet to AZ). m PHOTO 103- XII. Bridge 46. Looking west at remains of timber bridge over the Yamate-Gawa. Totally damaged by flood (8,090 feet to GZ, 8,350 feet to AZ). PHOTO 104—XII. Bridge 47. Looking north at undamaged trolley bridge over the Yamate-Gawa (7,450 feet to GZ, 7,700 feet to AZ). 112 PHOTO 105-XII. Bridge 48. Looking north at undamaged plate-girder, concrete-deck, highway bridge oyer the Yamate-Gawa; 12- and 14-inch water mains are carried by steel saddles between girders (7,130 feet to GZ, 7,400 feet to AZ), PHOTO 106-XII. Bridge 49. Looking northwest at remains of timber foot bridge over the Yamate-Gawa. Totally damaged by flood (6,380 feet to GZ, 6,650 feet to AZ). 113 PHOTO 107-XII. Bridge 50. South elevation of undamaged, plate-girder railroad bridge over the Yamate-Gawa. Paint on girders on the south elevation was slightly discolored by exposure to bomb effects. North elevation unaffected (6,580 feet to GZ, 6,900 feet to AZ). PHOTO Bridge 51. South elevation of undamaged, plate-girder railroad bridge and underpass. Paint on girders on the south elevation was slightly discolored by exposure to bomb effects. North elevation was unaffected (6,450 feet to GZ, 6,780 feet to AZj. 114 PHOTO 109-XII. Bridge 51. Cast metal sign fastened to the face of the north plate girder, showing Cooper E-40 loading, etc. 115 PHOTO 110-XII. Bridge 52. General oblique view showing most remote bridge included in study (12,200 feet to GZ, 12,450 feet to AZ). 116 HIROSHIMA LOCATION PLAN FOR BRIDGES HIROSHIMA HIROSHIMA PREFECTURE, HONSHU, JAPAN NOTE T = TIMBER C=CONCRETE S=STEEL CONTOUR INTERVAL 20 METERS GRID SYSTEM BASED ON 1000 YARD WORLD POLYCONIC GRID FOR GZ AND AZ DISTANCES -AND DAMAGE TO TO TABLE I. HIROSHIMA WAN (BAY) ll.S. STRATEGIC BOMBING SURVEY I BRIDGE LOCATION PLAN HIROSHIMA, JAPAN FIGURE I-ZEE | 7 39000 YARDS 731568 O - 47 (Face p. 116) No. 1 SECRET Trolley S Highway Bridge Highway Bridge Single track R.R. Bridge Sect, A-A BRIDGE 5 Distance to GZ 6,210' BRIDGE 2 Elev. of Piers Nearest the Abutments BRIDGE 4 Elev. Detail NOTE. 1. Sketches shown are only to indicate general features. 2. Dimensions shown are only approximate. Bottom Panels Distance to GZ 5,240' BRIDGE 7A SECRET BRIDGE 7 Distance to GZ 5,200' US. STRATEGIC BOMBING SURVEY BRIDGE SKETCHES HIROSHIMA JAPAN FIGURE 2-3H Tod Panels BRIDGE 5A Distance to GZ 6,160' 731568 O - 47 (Face p. 116) No. 2 SECRET Highway Bridge Highway Bridge Railroad Bridge BRIDGE 10 Distance to GZ= 6,950' BRIDGE 8 Distance to GZ = 5,390' BRIDGE 8A Distance to GZ = ££00' Highway Bridge Highway Bridge Highway Bridge NOTE. 1. Sketches shown are only to indicate general features. 2. Dimensions shown are only approximate. SECRET BRIDGE 12 Distance to GZ • 4/00' X BRIDGE 16 /Distance to GZ = 5,750' BRIDGE 17 Distance to GZ = 7600' US. STRATEGIC BOMBING SURVEY BRIDGE SKETCHES HIROSHIMA JAPAN FIGURE 3 - 3H 731568 0 - 47 (Face p. 116) No. 3 ELEVATION ELEVATION ELEVATION RAILROAD DISTANCE TO GZ 5,750' TRANSVERSE SECTION SPRING SUPPORT AT FIRST PIERS ONLY TRANSVERSE SECTION HIGHWAY PEDESTRIAN TRAFFIC DISTANCE TO GZ 4,270' HIGHWAY PEDESTRIAN TRAFFIC DISTANCE TO GZ 2,900' TRANSVERSE SECTION STIFFENER SKETCH OF TYPICAL GIRDER SKETCH OF LATERAL BRACING BETWEEN GIRDERS BRIDGE 19 BRIDGE 20 BRIDGE 26 ELEVATION ELEVATION ELEVATION HIGHWAY TRAFFIC DISTANCE TO GZ 4,570' ELEVATION OF SIMPLE SPAN AQUEDUCT DISTANCE TO GZ 1,880' TRANSVERSE SECTION SKETCH OF TOP BRACING SUSPENDER BRACING HIGHWAY PEDESTRIAN TRAFFIC DISTANCE TO GZ 4,370' TRANSVERSE SECTION SECRET BRIDGE 31 SKETCH OF BOTTOM BRACING U S. STRATEGIC BOMBING SURVEY BRIDGE SKETCHES HIROSHIMA, JAPAN FIGURE 4-2n PANEL BRIDGE 30-A BRIDGE 27 731568 0 - 47 (Face p. 116) No. 4 BRIDGE 35 DOUBLE TRACK TROLLEY STRUCTURE SIMILAR TO BRIDGE 13. 8 SPANS AT 33’. LENGTH* 264‘. WIDTH* 16'. 8 7“X 24“ I-BEAM GIRDERS. DISTANCE TO G.Z.= 3I90'. LONGITUDINAL VIEW ELEVATION LONGITUDINAL VIEW ELEVATION HIGHWAY 8 PEDESTRIAN BRIDGE BRIDGE 41 DISTANCE TO GZ =6150' TRANSVERSE SECTION ELEVATION HIGHWAY a PEDESTRIAN BRIDGE HIGHWAY 8 PEDESTRIAN BRIDGE BRIDGE 37 DISTANCE TO G Z = 3220' BRIDGE 33 DISTANCE TO G Z =5300' TRANSVERSE SECTION TRANSVERSE SECTION LONGITUDINAL VIEW BRIDGE 44 DOUBLE TRACK TROLLEY STRUCTURE SIMILAR TO BRIDGE 13. 14 SPANS AT 34‘. LENGTH* 476'. WIDTH* 16*. 8 7“X24“ I-BEAM GIRDERS. DISTANCE TO G Z * 5300*. LONGITUDINAL VIEW BRIDGE 45 HIGHWAY a PEDESTRIAN TRAFFIC STRUCTURE SIMILAR TO BRIDGE 33. 12 SPANS AT 36'. LENGTH* 432'. WIDTH* 19'. 5 ErxiS" HAUNCHED R.C. GIRDERS. 2*SPAN CONTINUOUS. DISTANCE TO G Z *7010'. ELEVATION TRANSVERSE SECTION SIMILAR TO BRIDGE 9-FIGURE 17 GIRDER: I3"X 1/2" COVER PLATE 4"X6"X 1/2" FLANGE ANGLES 4"X4"X 3/8" STIFFENER ANGLES, EX- CEPT 4“X6"X l/2"AN6LES AT EVERY 4TH STIFFENER 3 1/2"X 3 1/2" X 3/8" LATERAL 8 SWAY BRACING ANGLES. LATERAL BRAC- ING AT EVERY 4TH STIFFENER ONLY. ELEVATION GENERAL NOTES 1. FOR BRIDGE 13, SEE FIGURE 18. 2. IN MANY CASES, DIMENSIONS B SIZES SHOWN ARE APPROXIMATE, DUE TO STRUCTURAL DAMAGE. BRIDGE 47 DOUBLE TRACK TROLLEY STRUCTURE SIMILAR TO BRIDGE 13. 10 SPANS AT 34' LENGTH* 340'. WIDTH *16'. 8 7"X24“ I-BEAM GIRDERS. DISTANCE TO 6 Z = 7450' SEE PHOTO 104. DOUBLE TRACK R.R. BRIDGE BRIDGE 50 DISTANCE TO G Z *6580' HIGHWAY a PEDESTRIAN BRIDGE BRIDGE 48 DISTANCE TO G Z - 7130*. SECRET U S. STRATEGIC BOMBING SURVEY BRIDGE SKETCHES HIROSHIMA, JAPAN FIGURE 5-m TRANSVERSE SECTION 731568 0 - 47 (Face p. 116) No. 5 SECRET BRIDGE 51 DOUBLE TRACK R.R. STRUCTURE SIMILAR TO BRIDGE9, FIGURE 17 ,a BRIDGE 50, FIGURE 5. 2 SPANS AT 33'. LENGTH = 66'. 2 PLATE GIRDERS- 36" 8 48“ IN DEPTH. GIRDER1 I3"X 1/2" COVER PLATE. 3/8" WEB PLATE. 4"X 4"X 3/8" STIFFENER ANGLES. BRACING SIMILAR TO BRIDGE 50,FIGURE 5. DISTANCE TO 6 Z =6450'. LONGITUDINAL VIEW ELEVATION HIGHWAY 8 PEDESTRIAN TRAFFIC BRIDGE 52 DISTANCE TO 6 Z =12200' SECRET U.S.STRATEGIC BOMBING SURVEY TRANSVERSE SECTION BRIDGE SKETCHES HIROSHIMA, JAPAN FIGURE 6-XU 117 DATA SHEETS GENERAL NOTES {a) Plan distance is the distance from the center of bridge to GZ. (h) Slant distance is the distance from the center of bridge to AZ. BRIDGE 1 Coordinates: 5K Over River: Enko-Gawa. Distance from “Zero Point”: Plan, 9,800; slant, 10,000. USE: Highway and pedestrian. DESIGN TYPE: Timber superstructure on pile bents. MATERIALS USED: Longitudinal member: Seven timber beams, 12 by 22 inches per span. Decking: Timber, 4 by 10 inches. Abutments: Stone masonry. Piers: Four piles (12-inch diameter) bent of concrete footings. SPECIAL FEATURES: Used stapled connec- tions rather than steel bolt. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: Below United States standards. Generally, the bridges were designed to carry lower loadings than is Ameri- can practice. QUALITY OF CONSTRUCTION AND MATE- RIALS: The design, details and arrangements of the bridge structure were below United States standards. Quality of materials fair. DAMAGE—EXTENT: None: CAUSE: None. REPAIR AND SALVAGE: EXTENT USABLE: Spans: All. Piers: All. Abutments: Both. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary: None. Permanent: None. REMARKS: Bridge being used but timber deck- ing decaying. PHOTOGRAPHS: No. Direction and title 1 Looking west at east side of undamaged bridge over the Enko-Gawa. PHOTOGRAPHS—Continued No. Direction and title 2 Northeast corner of abutment of undam- aged bridge. BRIDGE 2 Coordinates: 5J Over River: Enko-Gawa. Distance from ‘‘Zero Point”: Plan, 8,480; slant, 8,740. USE: Railroad. DESIGN TYPE: Plate girder. MATERIALS USED: Longitudinal member: 88 inches in depth. in depth. Decking: Ties and rails. Abutments: Stones. Piers; Concrete. SPECIAL FEATURES: None. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: Bridges would carry normal railroad loadings. ComparabF with similar structures in United States. QUALITY OF CONSTRUCTION AND MA TERIALS: Comparable with similar struc tures in United States. Concrete and masonry good. DAMAGE—EXTENT: None. CAUSE: None. REPAIR AND SALVAGE: EXTENT USABLE: Spans: All. Piers: All. Abutments: Both. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary: None. Permanent: None. REMARKS: Carrying a single-track railroad. PHOTOGRAPHS: No. Direction and title 3 East elevation of single-track railroad bridge over the Enko-Gawa. Undam- aged. BRIDGE 3 Coordinates: 5J Over River: Enko-Gawa. Distance from “Zero Point”: Plan, 7,130; slant, 7,390. 118 SECRET PLAN VIEW TYPICAL EARTHQUAKE DESIGN NOTES■ Overturning force for piers » 30% of dead load. Overturning force for girders * 15 % of dead load. SKETCH SHOWING TYPICAL REINFORCING STEEL NOTES■ Bars vary in size from 1/4" to I 3/8“ Deformed bars were not used. Only smooth round bars used. ELEVATION TROLLEY CARS Showing Types "A" and "B" TROLLEY BRIDGES Showing girder ( I-Beams) span lengths and abutments. PLAN A-A GENERAL NOTES For schedule of steel material. All materials of medium steel unless otherwise specified. All rivets of rivet steel and 3/4* diameter unless otherwise noted. All rivet holes punched 1/8" less and reamed 1/16“ greater diameter than that of rivet. TYPICAL FLOATING PIER BRIDGE 13 NOTES■ Sand added for additional weight and economy. Dimensions are only approximate. CAR “A" BRIDGE 35 BRIDGE 44 SECRET CAR "B" U S. STRATEGIC BOMBING SURVEY BRIDGES- DESIGN FEATURES HIROSHIMA, JAPAN FIGURE 7-XU TYPICAL TROLLEY CARS AND BRIDGES BRIDGE 47 731568 0 - 47 (Face p. 118) No. 1 CORNER POST SKETCH BRIDGE 12 CORNER POST SKETCH BRIDGE 19 RAILING SKETCH BRIDGE 20 CORNER POST SKETCH BRIDGE 22 TYPE - Steel Plate Girder REMARKS - SE and SW corner posts separated from railing Tops of N E and S E corner posts dislodged. Top of NW corner post partly damaged. Photos 24,25 and 26. TYPE-Reinforced Concrete REMARKS. NE corner post cap blown entirely off. NW,SE,and SW corner post caps moved 4" to 6" from original position. Railing 3‘ above road grade was not disturbed. Photo 38 TYPE - Steel I Beam REMARKS < Numerous railing posts connected to slab by cast iron rods sheared off. Roadway showed shadow marks of north railing. Tin protective covering of 18" water main on north side slightly effected by blast. Photos 39,40, and 41. TYPE - Steel Plate Girder REMARKS > All stone posts dislodged to some extent, at road grade. NW comer post entirely blown down. Upper sections of the four center posts were moved 2 to 5“ from original position. Railings entirely destroyed. Photos 43 to 46 inclusive. RAILING SKETCH BRIDGE 25 ornamental light post BRIDGE 29 CORNER POST SKETCH BRIDGE 31 RAILING SKETCH BRIDGE 17 TYPE - Pinned Steel Truss REMARKS ■ NE, SE, and SW ornamental cast iron light posts entirely dislodged Upper portion of NW corner light post sheared off as shown and blown 50 SW from original position. Photo 78- TYPE- Reinforced Concrete REMARKS ■ Top portion of NW corner post dislodged 3" to south Other posts not damaged. Concrete railings not damaged. Photo 87 TYPE - Steel Plate Girder TYPE - Reinforced Concrete REMARKS ■ NE and SW corner post tops blown off. SE corner post top displaced 4". NW corner post top not disturbed. Concrete railing posts over each pier broken on Doth south and north railings Coping blown off both south and north roiling Photo 71 REMARKS Stone posts not damaged. Railings of spans adjacent to east and west abutments were not disturbed. All other railings blown off. Photo 36 SECRET BRIDGE 4 TYPE- Reinforced Concrete REMARKS- * ,.,,- Portion of concrete roiling at NE comer of bridge blown off. Distance to GZ = 6450 Photos 8 and 9 BRIDGE 8 TYPE - Reinforced Concrete REMARKS■ Concrete railings along both elevations of bridge blown off. Distance to GZ = 5390' Photo 13 U.S. STRATEGIC BOMBING SURVEY Superficial blast damage. BRIDGES SPECIAL FEATURES HIROSHIMA, JAPAN CirilDC Q W ORNAMENTAL POSTS r IbUnt o-XLL and railings 731568 0 - 47 (Face p, 118) No. 2 SECRET PLAN SECTION A-A TYPE A 12" Each Side Of Piers SECTION B-B TYPE B 60" Each Side Of Piers ELEVATION SECTION C-C TYPE C At Every Other Stiffener Between Type B NOTES Reinforced concrete slabs ore supported directly by longitudinal steel girders. Dimensions are only approximate. Many cases distances could not be measured accurately. In many cases thickness of slab could not be determined. SECRET TYPICAL ELEVATION OF GIRDER TYPICAL SECTION OF RAILING U.S. STRATEGIC BOMBING SURVEY BRIDGE 22 HIROSHIMA, JAPAN GRID 5-H FIGURE 9 -331 731568 O - 47 (Face p. 118) No. 3 SECRET PLAN EAST ELEVATION DECORATIVE POST RAILING DAMAGE SKETCH NOTES 1. Sections detailed show nearest steel cross member to that section. 2. Reinforced-cone, slab is supported directly by longitudinal steel girders. 3. Dimensions are only approximati CROSS SECTION OF CAST-IRON POSTS SECRET U.S. STRATEGIC BOMBING SURVEY BRIDGE 23 HIROSHIMA, JAPAN GRID 4-H FIGURE 10 -23L SECT. B-B SECT. C- C SECT D-D RAILING DETAIL Scale for all Details 731568 O - 47 (Face p. 118) No. 4 SECRET PLOT PLAN NOTES Reinferced-concrete slebs ore supported directly by longitudinal steel girders. Dimensions are approximate only-In many cases distances could not be measured accurately. In many coses thickness of slab could not be determined accurately. PLAN ELEVATION SECRET U S. STRATEGIC BOMBING SURVEY BRIDGE 24 HIROSHIMA, JAPAN GRID 4-H FIGURE II —HE TRANSVERSE ELEVATION 8 "B" 731568 O - 47 (Face p. 118) No. 5 SECRET FOR N.W. POST ■ CAP-BLOWN OFF N. E. " : " -MOVED 2" N. S.E. “ i " -NO MOVEMENT S t " : “ -MOVED 2“ S.E. i"P"- NO MOVEMENT i « -MOVED 2'-3" N. l “ - MOVED 1“ E. AT 45« ANGLE S “ ~ MOVED 2” S. SECTION THRU POST AT BRIDGE ENDS TRANSVERSE SECTION SECT ON SHOWING SLAB DAMAGE ON NORTH SIDE BETWEEN FIRST 8 SECOND PIERS FROM WEST ABUTMENT ON SOUTH SIDE BETWEEN FIRST 8 SECOND PIERS FROM WEST ABUTMENT SECTION "A-A* SIDEWALK SLAB ROADWAY SLAB SKETCH OF BLAST REACTION TO BRIDGE STRUCTURE DETAIL OF SCUPPER DAMAGE REINFORCING DETAILS SECRET U.S. STRATEGIC BOMBING SURVEY RAILING DETAIL BRIDGE 24 HIROSHIMA,JAPAN GRID 4-H FIGURE 12-XI 731568 O - 47 (Face p, 118) No. 6 SECRET NOTES Reinforced-concrete slob, supported directly by reinforced concrete longitudinal girders. No deck beams used as cross-members connecting girders. Dimensions are only approximate. Many cases distances could not be measured accurately. In many cases thickness of slab could not be determined. PLAN WEST ELEVATION SECTION AA SECTION OF GIRDER ELEVATION OF GIRDER SLAB STEEL SECRET U.S. STRATEGIC BOMBING SURVEY BRIDGE 25 HIROSHIMA, JAPAN GRID 3-H FIGURE 13—ZK 731568 O - 47 (Face p. 118) No. 7 SECRET NOTES Wood deck supported directly by wooden stringers. Wooden stringers are supported directly by built plate girder. (Transverse members) Dimensions are only approximate. In many cases distances could not be measured accurately. PLAN ELEVATION ISOMETRIC - SHOWING DAMAGE DAMAGE: Bomb blast struck bridge from below after rebounding from water and also struck directly at sides causing failure in members and bridge to fall downstream. SECRET TRUSS TYPICAL HALF SECTION CROSS SECTION U.S. STRATEGIC BOMBING SURVEY BRIDGE 29 HIROSHIMA, JAPAN GRID-5G FIGURE 14-XU 731568 0 - 47 (Face p. 118) No. 8 SECRET SECTION AA PLAN EAST ELEVATION ELEVATION NOTES Reinforced - concrete slab, supported directly by reinforced concrete longitudinal girders. No deck beams used as cross-members connecting girders. Dimensions are only approximate. Many cases distances could not be measured accurately. SECTION BB SECTION CC SECRET GIRDER 8 SLAB REINFORCING STEEL U S. STRATEGIC BOMBING SURVEY BRIDGE 3 HIROSHIMA, JAPAN GRID 5-J FIGURE 15 —XU 731568 0 - 47 (Face p. 118) No. 9 NOTES Reinforced - concrete slob supported directly by reinforced-concrete, longitudinal girders. No deck beams used os cross-members connecting girders. Dimensions are only approximate. Many cases distances could not be measured accurately. PLAN SLAB-REINFORCING DETAIL ELEVATION SECT. A-A SECT. B-B SECT. C-C STIRRUP DETAIL SECRET EXPANSION JOINT SUPPORT DETAIL GIRDER-REINFORCING DETAIL US. STRATEGIC BOMBING SURVEY CONTINUOUS GIRDER BRIDGE 30 HIROSHIMA, JAPAN GRID“5G FIGURE 16-HL SUPPORT DETAIL 731568 O - 47 (Face p. 118) No. 10 SECRET PLOT PLAN PLAN DETAIL OF SADDLES LONGITUDINAL ELEVATION NOTES DIMENSIONS ARE APPROXIMATE ONLY. IN MANY CASES,DISTANCES COULD NOT BE MEASURED ACCURATELY. SECRET TRANSVERSE SECTION "A"- "A" DETAIL "A" U S. STRATEGIC BOMBING SURVEY BRIDGE 9 HIROSHIMA,JAPAN GRID 3-| FfGURE 17*^311 731568 0 - 47 (Face p, 118) No. 11 NOTES Dimensions shown ore only approximate. In many cases distances and thickness of steel members could not be measured accurately. PLAN ELEVATION SECRET ELEVATION-DETAIL CROSS SECTION US. STRATEGIC BOMBING SURVEY BRIDGE 13 HIROSHIMA, JAPAN GRID-51 FIGURE 18-3H 731568 O - 47 (Face p. 118) No. 12 A longitudinal elevation LONGITUDINAL ELEVATION ELEVATION ELEVATION TRANSVERSE SECTION TRANSVERSE SECTION "Ah-"A" DETAIL OF PILE FOOTINGS TYPICAL EXISTING TIMBER BRIDGE. (BRIDGE I) TYPICAL TIMBER BRIDGE ERECTED FOR URGENT USE. (BRIDGE 43) GIRDER TRUSS LONGITUDINAL ELEVATION TRANSVERSE SECTION FUTURE TYPICAL TIMBER BRIDGE CONSTRUCTION FOR HIGHWAY 8 TROLLEY TRAFFIC. (BRIDGE 28) SECRET US. STRATEGIC BOMBING SURVEY SKETCH OF FUTURE STANDARD WOOD BRIDGE CONSTRUCTION. TYPICAL TIMBER BRIDGES HIROSHIMA, JAPAN FIGURE 19-331 TRANSVERSE SECTION n _—_ mmm R 731568 0 - 47 (Face p. 118) No. 13 SECRET BRIDGE 34 SIMILAR TO BRIDGES 18 6. II 4-PILE BENTS. LENGTH*312'. WIDTH-17'-10". BRIDGE 6 SIMILAR TO BRIDGE I. WIDTH* 17'-9". LENGTH* 266‘. BRIDGE 14 SIMILAR TO BRIDGES 18 6. 10 SPANS AT 30'. LENGTH*300' . WIDTH = 19- 9". BRIDGE 36 SIMILAR TO “FUTURE STANDARD" BRIDGE. 6 3-PILE BENTS. LENGTH* 178.’ WIDTH* IQ! BRIDGE 15 SIMILAR TO BRIDGES I 86. 14 4-PILE BENTS. LENGTH*309’. WIDTH*19' 7 I2"X 22" GIRDERS. BRIDGE 38 SIMILAR TO BRIDGES 18 6. 10 4-PILE BENTS. LENGTH-330‘ WIDTH-12'-1" SKETCH OF BRIDGE BRIDGE 18 SIMILAR TO BRIDGES I 8 6. 15 4-PILE BENTS. LENGTH* 448'. WIDTH* 19'. 7 12*X22" GIRDERS. BRIDGE 39 SIMILAR TO BRIDGES I 8 6. 15 4-PILE BENTS. LENGTH *415'. WIDTH* 16'-9". BRIDGE 21 SIMILAR TO BRIDGE 43. 9 7-PILE BENTS. LENGTH-295’. WIDTH-32'-IO" 12 IO"LOG GIRDERS. BENTS SKEWED APPROX. 15° TO LONGITUDINAL «|_ OF BRIDGE. BRIDGE 40 SIMILAR TO “FUTURE STANDARD" BRIDGE. IB 4-PILE BENTS. LENGTH* 421'. WIDTH-17'-II" BRIDGE II SUSPENSION SRAN-220*. WIDTH.9'. CABLES » 3 1/2". FOR DETAILS, PHOTOS 19 TO 23. BRIDGE 42 SIMILAR TO "FUTURE STANDARD BRIDGE. 13 4-PILE BENTS. LENGTH* 421'. WIDTH *l7‘-ir BRIDGE 32 SIMILAR TO BRIDGE 43. 29 5-PILE BENTS. LENGTH*660’. WIDTH-18'. 7 12"LOG GIRDERS. 6" EARTH ROADWAY ON 4" LOG DECK. ADDITIONAL BRACING TO PILES IN BENTS. SKETCH BELOW. BRIDGE 46 SIMILAR TO BRIDGES I 8 6. 9 4-PILE BENTS. LENGTH*220'. WIDTH* 13'-1" ELEVATION SKETCH BRIDGE I3A BRIDGE 49 SIMILAR TO "FUTURE STANDARD" BRI DGE. 10 2-PILE BENTS. LENGTH* 163'. WIDTH * 3'. 9 SPANS AT 33'. LENGTH *307'. SECTION AS SHOWN BELOW. NOTES FOR TIMBER BRIDGES 1. FOR BRIDGES 1,43 8 "FUTURE STANDARD", FIGURE 19. 2. IN MANY CASES,THE ACCURATE NUMBER OF SPANS COULD NOT BE DETERMINED AND THE APPROXIMATE LENGTH OF BRIDGE COULD NOT BE MEASURED BECAUSE OF MISSING SRUNS DUE TO DAMAGE. SECRET U.S.STRATEGIC BOMBING SURVEY SKETCH OF TRANSVERSE SECTION SKETCH OF PILE BENTS TIMBER BRIDGES HIROSHIMA, JAPAN FIGURE 20-211 731568 O - 47 (Face p. 118) No. 14 USE: Highway and pedestrian. DESIGN TYPE: Reinforced concrete. MATERIALS USED: Longitudinal member: Five reinforced-con- crete beams 13 by 27 inches per span. Decking: Seven-inch reinforced concrete with 11/2-inch asphalt wearing surface. Abutments: Concrete. Piers: Concrete. SPECIAL FEATURES: Beams haunched at supports. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES; More massive. Generally, the bridges were designed to carry lower loadings than is American practice. QUALITY OF CONSTRUCTION AND MA- TERIALS: The design, details and arrange- ments of the bridge were below United States standards. Quality of materials good. DAMAGE—EXTENT: Severe. Spans and piers adjacent to south abutment severely dam- aged. CAUSE: Flood. REPAIR AND SALVAGE: EXTENT USABLE: Spans: Five, Piers: Five. Abutments: One. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary: Four spans required with three piers and one abutment. Permanent: Five spans required with four piers and one abutment. REMARKS: Carrying a 16-inch water main along the east side by bents. PHOTOGRAPHS: No. Direction and title 4 Looking west at flood damage of highway bridge over the Enko-Gawa. 5 Deck girder reinforcing steel. 6 Damaged concrete girders. 7 Steel reinforcement in concrete deck. BRIDGE 4 * Coordinates: 5J Over River: Enko-Gawa. Distance from “Zero Point”: Plan, 6,450; slant, 6,750. USE: Highway, pedestrian and trolley. DESIGN TYPE: Reinforced concrete. MATERIALS USED: Longitudinal member: Fourteen reinforced- concrete beams, 12 by 30 inches per span. Decking: Seven-inch reinforced concrete with asphalt wearing surface. Abutments: Concrete. Piers: Concrete with stone masonry at corners. SPECIAL FEATURES : Piers arched. Longi- tudinal beams adjacent to abutments are straight. All others are haunched except at piers nearest to abutments which are hinged. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: More massive. Generally, the bridges were designed to carry lower loadings than is American practice. QUALITY OF CONSTRUCTION AND MA- TERIALS: The design, details, and arrange- ments of the bridge were below United States standards. Quality of materials good. Rail- ings not doweled. DAMAGE—EXTENT: None, except partly dam- aged concrete railings along the north and south elevation. CAUSE: Blast. REPAIR AND SALVAGE: EXTENT USABLE: Spans: All. Piers: All. Abutments; Both, REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary: None. Permanent: Replace damage railings and patch asphalt wearing surface. REMARKS: Carrying a double-track trolley. Blast strong enough to blow pedestrians to deck and into river, and force autos to curbs. Trolley cars on bridge remained on tracks. PHOTOGRAPHS: No. Direction and title 8 Looking south at north elevation of rein- forced-concrete bridge over the Enko- Gawa. Superficial blast damage at northeast corner concrete railing. 9 Southeast corner of east abutment. BRIDGE 5 Coordinates: 5J Over River: Enko-Gawa. Distance from ‘‘Zero Point”: Plan, 6,210; slant, 6,510. 119 USE: Highway and pedestrian. DESIGN TYPE; Reinforced concrete. MATERIALS USED: Longitudinal member: Seven reinforced-con- crete beams 15 by 27 inches per span. Decking: Reinforced concrete with asphalt- wearing surface. Abutments: Concrete. Piers; Concrete with stone masonry at cor- ners. SPECIAL FEATURES: Longitudinal beams haunched at supports. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: More massive. Generally, the bridges were designed to carry lower loadings than is American practice. QUALITY OF CONSTRUCTION AND MA- TERIALS; The design, details and arrange- ments of the bridge were below United States standards. Quality of materials good. DAMAGE—EXTENT: None. CAUSE: None. REPAIR AND SALVAGE: EXTENT USABLE: Spans: All. Piers: All. Abutments: Both. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary: None. Permanent: None. REMARKS: Structure well protected from the blast. PHOTOGRAPHS: No. Direction and title 10 Looking north at south elevation of rein- forced-concrete bridge over the Enko- Gawa. No damage. Note,—B ridge 5A (steel-truss) north of Bridge 5. BRIDGE 5A Coordinates: 5J Over River: Enko-Gawa. Distance from “Zero Point”: Plan, 6,160; slant, 6,470. USE: Water crossing. DESIGN TYPE: Steel-truss. MATERIALS USED: Longitudinal member: 3- by 3- by 14-inch angles. MATERIALS USED—Continued Decking: 3- by 3- by 14-inch angles and 2 by 14-inch bars comprising the steel bracing. Abutments: Concrete with masonry. Piers: Concrete, SPECIAL FEATURES: Top and bottom chords parallel. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES : Bridges would carry normal aqueduct loadings. Comparable with similar structures in the United States. QUALITY OF CONSTRUCTION AND MA- TERIALS: Comparable with similar struc- tures in United States. Materials good for con- crete and masonry. DAMAGE—EXTENT: None. CAUSE: None. REPAIR AND SALVAGE: EXTENT USABLE: Spans: All. Piers: All. Abutments: Both. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary: None. Permanent: None. REMARKS: Aqueduct carrying 16-inch water main. PHOTOGRAPHS: No. Direction and title 10 Steel-truss aqueduct south of Bridge 5. No damage. BRIDGE 6 Coordinates: 41 Over River: Enko-Gawa. Distance from ‘‘Zero Point”: Plan 5,370; slant 5,730. USE; Highway and pedestrian. DESIGN TYPE: Timber superstructure on pile bents. MATERIALS USED: Longitudinal member: Seven timber beams per span. Decking; Timber. Abutments: Concrete. Piers: Four piles bent. SPECIAL FEATURES 5: None. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: Not ascer- tainable. 120 QUALITY OF CONSTRUCTION AND MA- TERIALS: Not ascertainable. DAMAGE—EXTENT: Complete destruction. CAUSE: Initially damaged by blast at approxi- mate bridge center, later totally destroyed by fire. REPAIR AND SALVAGE: EXTENT USABLE: Spans: None. Piers: None. Abutments: Both. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary: Permanent: New bridge required. REMARKS: Constant replacement of piling re- quired after floods. PHOTOGRAPHS: No. Direction and title 11 Looking south at remains of bridge over the Enko-Gawa destroyed by blast and flood. BRIDGE 7 Coordinates: 41 Over River: Kyobashi-Gawa, Distance from “Zero Point”: Plan 5,200; slant 5,570. USE: Highway and pedestrian, DESIGN TYPE: Reinforced concrete. MATERIALS USED; Longitudinal member: Six reinforced-con- crete beams, 16 by 20 inches per span. Decking: Reinforced concrete with asphalt wearing surface. Abutments: Concrete. Piers: Concrete bents. SPECIAL FEATURES: Slight intrado effect. Longitudinal beams were haunched at supports. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: Below United States standards principally because of lower design loads. QUALITY of construction AND MA- IERIALS: The design, details and arrange- ments of the bridge structure were below United States standards. Quality of materials good. DAMAGE—EXTENT: None. CAUSE; None. REPAIR AND SALVAGE: EXTENT USABLE: Spans: All. Piers: All. Abutments: Both. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary: None. Permanent: None. REMARKS: Structure well protected from blast. PHOTOGRAPHS: No. Direction and title 12 Looking west between reinforced-con- crete, undamaged bridge and steel-truss aqueduct over the Kyobashi-Gawa. BRIDGE 7A Coordinates: 41 Over River: Kyobashi-Gawa. Distance from “Zero Point”: Plan, 5,240; slant, 5,600. USE: Water crossing. DESIGN TYPE: Steel truss. MATERIALS USED: Longitudinal member: 4- by 6- by %-inch angles. Decking: 3 by 3 feet by %-inch angles by 2- by 2- by %-inch angles, also 3- by 6- by %-inch angles with piers, comprising bracing. Abutments: Concrete faced with stone and brick masonry. Piers: Concrete. SPECIAL FEATURES: Top and bottom chords parallel. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES : Bridges would carry normal aqueduct loadings. Comparable with similar structures in United States. QUALITY OF CONSTRUCTION AND MA- TERIALS: Comparable with similar struc- tures in United States. Materials good for concrete and masonry. DAMAGE-EXTENT: None. CAUSE: None. REPAIR AND SALVAGE: EXTENT USABLE: Spans: All. Piers: All, Abutments: Both. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary: None. Permanent: None. 121 REMARKS: Aqueduct carrying 22-inch water main. Sheet-metal covering blown from pipe, PHOTOGRAPHS: No. Direction and title 12 • Looking west between reinforced-con- crete Bridge 7 and steel aqueduct Bridge 7A over the Kyobashi-Gawa. No damage. BRIDGE 8 Coordinates: 41 Over River: Kyobashi-Gawa. Distance from “Zero Point”: Plan, 5,390; slant, 5,700. USE; Highway and pedestrian. DESIGN TYPE: Reinforced concrete. MATERIALS USED: Longitudinal member: Five reinforced-con- crete beams, 12- by 20-inch, per span. Decking: Reinforced concrete with asphalt wearing surface. Abutments: Concrete. Piers: Concrete bents. SPECIAL FEATURES. Longitudinal beams were haunched at supports. Piers haunched at pier caps. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: Below United States standards principally because of lower design loads. QUALITY OF CONSTRUCTION AND MA- TERIALS: The design, details, and arrange- ments of the bridge structure were below United States standards. Quality of materials good. DAMAGE—EXTENT: None, except railings to- tally destroyed along both elevations. Asphalt surface very badly pocketed. CAUSE: Blast. REPAIR AND SALVAGE: EXTENT USABLE: Spans: All. Piers: All. Abutments: Both. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary: None. Permanent: Replace destroyed concrete rail- ings and patch asphalt wearing surface. REMARKS: 1 )edestrians blown into river by blast. Automobiles traveling along the bridge not disturbed by blast. PHOTOGRAPHS: No. Direction and title 13 Looking north at south elevation of bridge over Kyobashi-Gawa. Superfi- cial blast damage to concrete railings. BRIDGE 8A Coordinates: H Over River: None. Distance from “Zero Point”: Plan, 5,580; slant, 5,900. USE: Railroad. DESIGN TYPE: I-beam girder. MATERIALS USED: Longitudinal member: 24-inch I-beam with angle stiffeners. Decking: Ties and rails. Abutments: Concrete. Piers: None. SPECIAL FEATURES: None. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: Bridge would carry normal railroad loadings. Comparable with similar structures in United States. QUALITY OF CONSTRUCTION AND MA- TERIALS: Comparable with similar struc- tures in United States. Materials good for con- crete and masonry, DAMAGE—EXTENT: None. CAUSE: None. REPAIR AND SALVAGE: EXTENT USABLE: Spans: Entire single span. Piers: None used. Abutments: Botin. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary; None. Permanent: None. REMARKS: Carrying a double-track railroad line, and forms an underpass for highway and pedestrian traffic. PHOTOGRAPHS: No. Direction and title 14 Looking north at undamaged, steel- girder. I-beam railroad bridge. BRIDGE 9 Coordinates: 31 Over River; Kyobashi-Gawa. Distance from “Zero Point”: Plan, 5,730; slant, 6,050. 122 1 SE: Railroad. DESIGN TYPE: Plate girder. materials used : Longitudinal member: 69 and 75 inches in depth. Decking: Ties and mils. Abutments: Concrete. Piers: Concrete. Faced with stone and brick masonry at corners. SPECIAL FEATURES: Skewed at approxi- mately 45°. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: Bridges would carry normal railroad loadings. Comparable with similar structures in United States. QUALITY OF CONSTRUCTION AND MA- TERIALS: Comparable with similar struc- tures iu United States, Materials good for con- crete and masonry. DAMAGE—EXTENT; No structural damage to girders. Only discolored paint due to bomb effects along the south side. North face not affected. CAUSE; None. REPAIR AND SALVAGE: extent usable : Spans: All. Piers: All. Abutments: None. Repairs necessary to place in SERVICE: Temporary : None. Permanent: None. REMARKS: Carrying a double-track railroad line. RHOTOGRAPHS: No. Direction and title 15 South elevation of undamaged double- track railroad bridge over the Kyo- bashi-Gawa. 16 Paint on south elevation of steel girder discolored by exposure to bomb effects. D Paint on north elevation of steel girder unaffected by bomb effects. BRIDGE 10 Coordinates: 31 Cver River: Kyobashi-Gawa. ■stance from “Zero Point”: Plan, 6,950; slant, I SE : Highway and pedestrian. ESIGX TYPE: Reinforced concrete. MATERIALS USED: Longitudinal member: Five reinforced-con- crete beams, 13 by 30 inches per span. Decking: Reinforced concrete with asphalt wearing surface. Abutments: Concrete. Piers: Concrete bents. SPECIAL FEATURES: Longitudinal beams haunched at supports. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: Below United States standards principally because of lower design loads. QUALITY OF CONSTRUCTION AND MA- TERIALS: The design, details, and arrange- ments of the bridge structure were below United States standards. Quality of materials good. DAMAGE—EXTENT: Moderate. The pier and spans adjacent to the south abutment were caused to settle. CAUSE: Flood. REPAIR AND SALVAGE: EXTENT USABLE: Spans: All. Piers: All. Abutments: Both. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary: None. Permanent: One pier and two spans. REMARKS: Carrying a 20-inch water main along the west side. Bridge opened to light traffic. PHOTOGRAPHS: No. Direction and title 18 Looking west at east elevation of bridge over the Kyobashi-Gawa showing mod- erate flood damage. BRIDGE 11 Coordinates: 21 Over River: Kyobashi-Gawa. Distance from “Zero Point'’: Plan, 7,960; slant, 8,200. USE: Pedestrian. DESIGN TYPE : Cable suspension. MATERIALS USED: Longitudinal member: Steel cable. Decking: Timber, iy± by 6 inches. Abutments: Concrete. Piers: None. 568—47 9 123 SPECIAL FEATURES: Unusual suspension and vertical members. Eyes and hooks form connection of crude type at ends of suspension cables. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: Below United States standards; lower design loads. QUALITY OF CONSTRUCTION AND MA- TERIALS: The design, details and arrange- ments of the bridge structure wrere below7 United States standards. Quality of materials fair. DAMAGE—EXTENT: None. CAUSE: None. REPAIR AND SALVAGE: EXTENT USABLE: Spans: The single suspension. Piers: None. Abutments: Both, REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary: None. Permanent: None. REMARKS: Constructed by the Japanese Army. PHOTOGRAPHS: No. Direction and title 19 Looking southwest at corner of north abutment. 20 Cable-tied vertical member, w7est suspen- sion cable. 21 Looking wTest at east suspension cable, undamaged. 22 Underside of deck structure. 23 Cable-tied vertical member of wTest sus- pension cable. BRIDGE 12 Coordinates: 51 Over River: Kyobashi-Gawa. Distance from “Zero Point”: Plan, 4,700; slant, 5,100. USE; Highway and pedestrian. DESIGN TYPE: Plate girder. MATERIALS USED: Longitudinal member: Thirty-six inches in depth. Decking: Reinforced concrete with asphalt wearing surface. Abutments: Concrete. Piers: Concrete with stone facing at corners. SPECIAL FEATURES: Longitudinal girders haunched at supports. Ornamental stone fac- ing on external girders. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: Moi •e massive. Generally, the bridges were designed to carry lower loadings than is American practice. QUALITY OF CONSTRUCTION AND MA- TERIALS: The design, details and arrange- ments of the bridge were below United States standards. Quality of material good for con- crete. DAMAGE—EXTENT: No structural damage to girders. Ornamental stone posts at the south- east and southwest, corners slightly dislodged. CAUSE: Blast. REPAIR AND SALVAGE: EXTENT USABLE: Spans: All. Piers: All. Abutments: Both. REPAIRS NECESSARY TO PLACE IN SERVICE; Temporary: None. Permanent: Repair dislodged ornamental stone posts. Patch asphalt wearing sur- face. REMARKS: Carrying a 16-inch waiter main. PHOTOGRAPHS: No. Direction and title 24 South elevation of bridge over the Kyo- bashi-Gawa. 25 Ornamental stone post at southwest cor- ner dislodged by blast, 26 Ornamental stone post at southeast cor- ner dislodged by blast. BRIDGE 13 Coordinates: 51 Over River: Kyobashi-Gawa. Distance from “Zero Point”: Plan, 4,670; slant, 5,080. L'SE; Trolley. DESIGN TYPE: Plate girder (I-beam). * MATERIALS USED: Longitudinal member; 24-inch I-beam with angle stiffeners. Decking: Ties and rails.* Abutments: Stone. Piers: Four H-columns bent with angle brac- ing. SPECIAL FEATURES: Additional timber column bents with timber bracing added to each bent. H-columns with angle extension fastened to steel bents to carry electrical overhead service. 124 HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: Below United States standards ; lower design loads. QUALITY OF CONSTRUCTION AND MA- TERIALS: The design, details and arrange- ments of the bridge structure were below United States standards. Quality of material fair for timber. DAMAGE—EXTENT: Slight deflection to sev- eral main members. Slight damage to center spans. Moderate damage to several of the spans and bents along the bridge structure. CAUSE; Blast and flood. REPAIR AND SALVAGE; EXTENT USABLE: Spans: All. Piers: All. Abutments; Both. REPAIRS NECESSARY TO PLACE IN SERVICE: • Temporary: Build up four center bents with timber cribbing to normal elevation of trol- ley tracks. Permanent: Replace four center bents and reset 24-inch I-section girder to normal alignment and elevation. REMARKS: Carrying a double-track trolley line. Bridge was repaired and used during this survey. An S-curve slope existed in trolley rails across the bridge spans. PHOTOGRAPHS: No. Direction and title 27 Timber cribbing under trolley tracks at fourth span from east abutment of blast- and flood-damaged bridge over the Kyobashi-Gawa. 28 Looking west at cribbing under trolley tracks at fifth span from east abutment. 29 South elevation of trolley bridge. 30 Flood and blast damage to bridge. BRIDGE 13—A Coordinates: 51 Over River; Kyobashi-Gawa. Distance from “Zero Point”: Plan, 4,670; slant, 5,080. USE: Double-track trolley. DESIGN TYPE: Timber superstructure on pile bents. MATERIALS USED: Longitudinal member; Four timber beams, 16 by 20 inches per span. MATERIALS USED—Continued Decking: Timber ties and rails. Abutments: Stone masonry. Piers: Four piles bent. SPECIAL FEATURES: Timber extended over abutments and set on soil without sills. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: Not ascer- tainable. QUALITY OF CONSTRUCTION AND MA- TERIALS: Not ascertainable. DAMAGE—EXTENT: Complete destruction. CAUSE: Span adjacent to east abutment ini- tially damaged by blast, later bridge totally de- stroyed by tire. REPAIR AND SALVAGE: EXTENT USABLE: Spans: None. Piers: None. Abutments: Both. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary: Permanent: New bridge required. REMARKS: Constant replacement of piling re- quired after floods. PHOTOGRAPHS: No. Direction and title 31 Looking east at blast- and fire-destroyed timber bridge over the Kyobashi-Gawa. 32 Looking north. Destroyed by blast and fire. BRIDGE 14 Coordinates: 51 Over River: Kyobashi-Gawa. Distance from “Zero Point”: Plan, 4,760; slant, 5,170. USE; Pedestrian. DESIGN TYPE: Timber superstructure on pile bents. MATERIALS USED; Longitudinal member: Timber girders. Decking: Timber. Abutments: Stone masonry. Piers: Four piles bent. SPECIAL FEATURES: None. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: Not ascer- tainable. QUALITY OF CONSTRUCTION AND MA- TERIALS: Not ascertainable. DAMAGE—EXTENT: Complete destruction. 125 CAUSE: By spreading of fires from adjacent buildings. REPAIR AND SALVAGE; EXTENT USABLE: Spans: None. Piers: None. Abutments: Both. REPAIRS NECESSARY TO PLACE IN SERVICE; Temporary: Permanent: New bridge required. REMARKS: Constant replacement of piling re- quired after floods. PHOTOGRAPHS: No. Direction and title 33 Looking north at west abutment of fire destroyed bridge over the Kyobashi- Gawa. BRIDGE 15 Coordinates: 61 Over River: Kyobashi-Gawa. Distance from “Zero Point”: Plan, 5,580; slant, 5,900. USE: Highway and pedestrian. DESIGN TYPE: Timber superstructure on pile bents. MATERIALS USED; Longitudinal member: Seven timber beams, 12 by 22 inch per span. Decking; 4 by 10 inches. Abutments: Concrete. Piers: Four piles (12-inch diameter) per bent. SPECIAL FEATURES: Used stapled connec- tions rather than steel bolt, HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: Below United States standards; lower design loads. QUALITY OF CONSTRUCTION AND MA- TERIALS: The design, details, and arrange- ments of the bridge structure were below United States standards. Quality of material fair. DAMAGE—EXTENT: None. CAUSE; None. REPAIR AND SALVAGE: EXTENT USABLE: Spans: All. Piers: All. Abutments: Both. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary: None. Permanent: None. REMARKS: Bridge being used but timber deck- ing decaying. PHOTOGRAPHS: No. Direction and title 34 Looking south at undamaged bridge over the Kyobashi-Gawa. BRIDGE 16 Coordinates: 61 Over River: Kyobashi-Gawa. Distance from “Zero Point”: Plan, 5,750; slant, 6,100. USE: Highway and pedestrian. DESIGN TYPE: Reinforced concrete. MATERIALS USED: Longitudinal member: Fourteen reinforced- concrete beams, 13 by 33 inch, per span. Decking: Reinforced concrete with asphalt wearing surface. Abutments: Concrete. Piers: Concrete with stone masonary at corners. SPECIAL FEATURES: Some of the longitudi- nal beams were haunched at supports. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: More massive. Generally, the bridges were designed to carry lower loadings than is American practice. QUALITY OF CONSTRUCTION AND MA- TERIALS: The design, details, and arrange- ments of the bridge structure were below United States standards. Quality of material good. DAMAGE—EXTENT: None. CAUSE: None. REPAIR AND SALVAGE: EXTENT USABLE: Spans: All. Piers: All. Abutments: Both. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary: None. Permanent: None. REMARKS: Structure fairly protected from blast. PHOTOGRAPHS: No. Direction and title 35 Looking south showing the north eleva- tion of undamaged rein forced-concrete highway bridge over the Kyobashi- Gawa. 126 BRIDGE 17 Coordinates: 7H Over River: Kyobashi-Gawa. Distance from “Zero Point”: Plan, 7,600; slant, 8,870. USE: H ighway, pedestrian and trolley. DESIGN TYPE: Plate girder. MATERIALS USED; Longitudinal member: 54 inches in depth. Decking: Reinforced concrete with asphalt wearing surface. Abutments: Concrete with stone facing. Piers: Concrete with stone facing. SPECIAL FEATURES: Girders haunched and anchored to pin-connected rockers at piers. Stone masonry approach spans. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: More massive. Generally, the bridges were designed to carry lower loadings than is American practice. QUALITY OF CONSTRUCTION AND MA- TERIALS : The railings not doweled. The design, details and arrangements of the bridge structure were below United States standards. Quality of materials good for concrete and stone masonry. DAMAGE—EXTENT: No structural damage to girders. Railings of main spans destroyed. Approach spans railings not damaged. CAUSE: Blast. REPAIR AND SALVAGE: EXTENT USABLE: Spans: All. Piers: All. Abutments: Both. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary: None. Permanent: Replace damaged concrete rail- ings. REMARKS: Carrying double-track trolley line. Carrying 12-inch water main. No vehicles or pedestrians on structure during blast. • PHOTOGRAPHS: No. Direction and title 36 Looking south at trolley and highway, plate-girder bridge over the Kyobashi- Gawa. Superficial damage to concrete railings by blast. BRIDGE 18 Coordinates: TG Over River: Motoyasu-Gawa. Distance from “Zero Point’’: Plan, 6,000; slant, 6,300. USE: Highway and pedestrian. DESIGN TYPE: Timber superstructure on pile bents. MATERIALS USED: Longitudinal member: Seven timber beams, 12 by 22 inches per span. Decking: Timber, 4 by 10 inches. Abutments: Stone masonry. Piers: Four piles (12-inch diameter) bent. SPECIAL FEATURES: Used stapled connec- tions rather than steel bolt. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: Below United States standards, lower design loads. QUALITY OF CONSTRUCTION AND MA- TERIALS : The design, details and arrange- ments of the bridge structure were below United States standards. Quality of material fair. DAMAGE—EXTENT: None. CAUSE: None. REPAIR AND SALVAGE: EXTENT USABLE: Spans; None. Piers: None. Abutments: Both. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary: None, Permanent: None, REMARKS: Bridge being used but timber deck- ing and railing in decayed condition. PHOTOGRAPHS: No. Direction and title 37 Looking north at undamaged highway bridge over the Motoyasu-Gawa. BRIDGE 19 Coordinates: 6G Over River: Motoyasu-Gawa. Distance from “Zero Point”: Plan, 4,270; slant, 4,720. USE: Highway and pedestrian. DESIGN TYPE: Reinforced bents. 127 MATERIALS USED: Longitudinal member: Seven rein forced-con- crete beams, 13 by 20 inches per span. Decking: Reinforced concrete with asphalt wearing surface. Abutments: Concrete. Piers: Concrete bents. SPECIAL FEATURES: Longitudinal beams were haunched at supports. Concrete cap under beams only at every other pier. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: Below United States standards, principally because of lower design loads. QUALITY OF CONSTRUCTION AND MA- TERIALS: The design, details, and arrange- ments of the bridge structure were below United States standards. Quality of materials good. DAMAGE—EXTENT: None. CAUSE: None. REPAIR AND SALVAGE: EXTENT USABLE: Spans: All. Piers: All. Abutments. Both. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary; None. Permanent: None. REMARKS: Carrying an 18-inch water line along the north side supported on steel brackets and saddle along concrete bents. PHOTOGRAPHS: No. Direction and title 38 Looking southeast at the north elevation of highway bridge over the Motoyasu- Gawa. Ornamental stone posts dis- lodged by blast. BRIDGE 20 Coordinates: 6G Over River: Motoyasu-Gawa. Distance from “Zero Point”: Plan, 2,900; slant, 3,450. USE: Highway and pedestrian. DESIGN TYPE: I-beam girders. MATERIALS USED: Longitudinal member; six by 20-inch I-beam with angle stiffeners. Decking: Reinforced concrete with asphalt wearing surface. Abutments: Stone, MATERIALS USED—Continued Piers: Four- by 12-inch H-column bents with 3- by 3- by %-inch angles for diagonal bracing. SPECIAL FEATURES: H-column of bents set in concrete footing. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: Below United States standards because of lower design loads. QUALITY OF CONSTRUCTION AND MA- TERIALS: The design, details, and arrange- ments of the bridge structure were below United States standards. Quality of material good for concrete. DAMAGE — EXTENT: Superficial: No struc- tural damage to girders. Very slight damage to railings. Very slight damage to steel bents. CAUSE : Blast hnd flood. REPAIR AND SALVAGE: EXTENT USABLE: Spans: All. Piers: All. Abutments: Both. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary: None. Permanent: Replace broken concrete railings. Minor repairs to steel bents. REMARKS: Sixteen-inch water main carried by brackets along steel bents. PHOTOGRAPHS : No. Direction and title 39 Looking south at slight blast damage to northwest section of bridge over the Motoyasu-Gawa. 40 South elevation showing debris against bents deposited by flood. BRIDGE 21 Coordinates: 511 Over River: Motoyasu-Gawa. Distance from “Zero Point”: Plan, 1,450; slant, 2,460. USE: Highway and pedestrian. DESIGN TYPE: Timber superstructure on pile bents. MATERIALS USED: Longitudinal member: Twelve log girders, 10-inch per span. Decking: Timber, 4 by 12 inches. Abutments: Stone masonry. Piers: Seven piles per bent (10-inch diame- ter). 128 SPECIAL FEATURES: Bridge skewed approx- imately 15°. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: Not ascer- tainable. QUALITY OF CONSTRUCTION AND MA- TERIALS: Not ascertainable. DAMAGE—EXTENT: Complete destruction. CAUSE: Spans at approximate bridge center ini- tially damaged by blast, later totally destroyed by flood. REPAIR AND SALVAGE: EXTENT USABLE: Spans: All. Piers: All, Abutments: Both. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary: Permanent: New bridge required. REMARKS: Constant replacement of piling re- quired after floods. PHOTOGRAPHS: No. Direction and title 42 Looking north at the southwest part of bridge over the Motoyasu-Gawa de- stroyed by blast and flood. BRIDGE 22 Coordinates: 5H Over River: Motoyasu-Gawa. Distance from “Zero Point”: Plan, 260; slant, 2,020. USE: H ighway and pedestrian. DESIGN TYPE: Plate girder. MATERIALS USED: Longitudinal member: Thirty inches in depth. Decking: Reinforced concrete with asphalt wearing surface. Abutments: Concrete faced with masonry. Piers: Concrete faced with masonry. SPECIAL FEATURES: Girders haunched at supports. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: More massive. Generally, the bridges were designed to carry lower loadings than is American practice. QUALITY OF CONSTRUCTION AND MA- TERIALS: The design, details and arrange- ments of the bridge were below United States standards. Quality of materials good for con- crete and masonry. DAMAGE—EXTENT: No structural damage to girders. Concrete railings completely de- stroyed, Ornamental posts dislodged. CAUSE: Blast. REPAIR AND SALVAGE: EXTENT USABLE: Spans: All. Piers: All. Abutments; Both. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary: None. Permanent: Replace railings. Replace and reset ornamental posts. Resurface part of deck near abutments. REMARKS: Nearest bridge to the zero point covered in the survey carrying a 16-inch water line. PHOTOGRAPHS: No. Direction and title 43 Superficial blast damage to bridge over the Motoyasu-Gawa. 44 North elevation. No structural damage. 45 Stone posts and railings damaged by blast, 46 Blast effect on ornamental stone posts. BRIDGE 23 Coordinates: 4H Over River: Ota-Gawa. Distance from “Zero Point”: Plan, 860; slant, 2,170. USE: Highway and pedestrian. DESIGN TYPE: Plate girder. MATERIALS USED; Longitudinal member: Thirty-nine inches in depth. Decking; Reinforced concrete with asphalt wearing surface. Abutments: Concrete faced with stone ma- sonry. Piers: Concrete. SPECIAL FEATURES: Girders haunched at supports. Girders abutting the south fact of Bridge 24 are cantilevered. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: More massive. Generally, the bridges were designed to carry lower loadings than is American practice. 129 QUALITY OF CONSTRUCTION AND MA- TERIALS: The design, details and arrange- ments of the bridge were below United States standards. Quality of materials good for con- crete and masonry. DAMAGE—EXTENT: Superficial. No struc- tural damage to piers. Ornamental posts at south end of bridge slightly dislodged. Con- crete railings along both sides of bridge com- pletely destroyed. CAUSE: Blast. REPAIR AND SALVAGE: EXTENT USABLE: Spans: All. Piers: All. Abutments: One. Note: only one abutment for this bridge. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary: No repairs necessary for tem- porary use. Permanent: Replace concrete railings. Reset posts. REMARKS: None. PHOTOGRAPHS: No. Direction and title 47 Looking east at west elevation of Bridge 23. Note cantilever span to Bridge 24 over the Ota-Gawa. 48 Cast-iron post sections 5 feet on center for concrete railing sheared ofl east curb by blast. 49 Cast-iron post sections and concrete rail- ing along west curb destroyed by blast. BRIDGE 24 Coordinates: 4H Over River: Ota-Gawa. Distance from “Zero Point”: Plan, 1,000; slant, 2,230. USE: Highway, pedestrian and trolley. DESIGN TYPE: Plate girder. MATERIALS USED: Longitudinal member: Forty-eight inches in depth. Decking: Reinforced concrete with asphalt wearing surface. Abutments: Concrete faced with stone ma- sonry. Piers: Concrete with stone masonry at cor- ners. SPECIAL FEATURES: Girders haunched at supports. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: More massive. Generally, the bridges were designed to carry lower loadings than is American practice. QUALITY OF CONSTRUCTION AND MA- TERIALS: The design, details and arrange- ments of the bridge were below United States standards. Quality of materials good for con- crete and masonry. DAMAGE—EXTENT; Several main members slightly deflected. Concrete railings destroyed. Granite curbs and concrete walks partly de- stroyed. Concrete deck damaged. Trolley rails displaced at bridge ends. Ornamental stone posts of bridge damaged. CAUSE: Blast. REPAIR AND SALVAGE: EXTENT USABLE: Spans: All. Piers: All. Abutments: Both. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary: No repairs necessary for tempo- rary service. Permanent: Replace railings. Reset all power poles. Remove and replace all dam- aged walks, curbs, and roadway deck. Re- surface part of deck. REMARKS: ( 'arried a double-track trolley line. The most used and outstanding bridge of the city of Hiroshima. It was the aiming point of the atomic bomb dropped at Hiroshima. PHOTOGRAPHS: No. Direction mid title 50 North elevation of bridge over Ota-Gawa. Concrete walk and railing damaged by blast. 51 Southeast part of bridge over Ota-Gawa. Railings damaged by blast. 52 Blast damage to southwest section. Con- crete walk raised 20 inches above origi- nal road grade. Granite curbs moved 9y2 inches south from original position. 53 North elevation adjacent to east abut- ment. No structural damage to plate girders. 130 PHOTOGRAPHS—Continued No. Direction and title 54 Portion of north granite curb and walk. Drain scupper west of bridge 23 ele- vated 20 inches above road grade by blast effects. 55 Portion of north granite curb and walk. Drain scupper east of bridge 23 ele- vated 24 inches above road grade. 56 North concrete walk raised 38 inches above cross steel members, supporting the north walk, by blast effects. 57 Blast effects moved roadway slab later- ally 15 inches north and raised it 14 inches above original position. Note pushed-up scupper. 58 Northwest corner of bridge showing blast damage to concrete walk, granite curb, and roadway concrete deck. 59 Northeast corner of bridge showing blast damage to concrete walk and granite curb. 60 Intersection of Bridge 23 and Bridge 24. Rails of south trolley tracks pushed up 8 inches above original road grade by blast. 61 Blast damage. Cast-iron post sections at northwest corner of intersection of Bridges 23 and 24. Post sections 5 feet on center for concrete railings of Bridge 23 and 6 feet on center for Bridge 24. 62 Northeast corner, steel-plate girder. No structural damage by blast. 63 Underside of steel plate girders and cross- members at east abutment. Slight de- fection. 64 Underside of steel -plate girders and cross- members at west abutment. No struc- tural damage. 65 Secondary framing of exterior girder under north walk at approximate bridge center. No structural damage. 66 Inside faces of plate girders fourth span from east abutment under north walk. Deflected slightly by blast. 67 Inside faces of plate girders. Fifth span from east abutment under north walk. Deflected slightly by blast. 68 East end of bridge. Slight deflection in trolley rails due to shifting of bridge deck by blast. PHOTOGRAPHS—Continued No. Direction and title 69 West end of bridge. Trolley rails moved laterally 15 inches to the north as blast effect shifted bridge deck. TO Intersection of Bridge 23 (left) and Bridge 24* (right). All damage from blast effects. Bridge 23 (860 feet to GZ, 2,170 feet to AZ). Bridge 24 (1,000 feet to GZ, 2,230 feet to AZ). BRIDGE 25 Coordinates: 3H Over River: Ota-Gawa. Distance from “Zero Point”: Plan, 5,200; slant, 5,570. USE: Highway and pedestrian. DESIGN TYPE: Reinforced concrete. MATERIALS USED: Longitudinal member: Seven reinforced-con- crete beams, 13 by 24 inch per span. Decking; Reinforced concrete (8 inches) asphaltic wearing surface. Abutments: Concrete. Piers; Concrete bents. SPECIAL FEATURES: Some of the longitudi- nal beams were haunched at supports. Bridge is skewed. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: More massive. Generally, bridges were designed to carry lower loadings than is American practice. QUALITY OF CONSTRUCTION AND MA- TERIALS: The design, details and arrange- ments of the bridge structure were below United States standards. Quality of materials good. DAMAGE—EXTENT: Moderate to piers. Su- perficial to coping. One pier entirely destroyed and one pier partly damaged by flood. Deck over damaged piers also partly broken. Coping blown off by blast along both railings. Railing very slightly damaged by blast. CAUSE: Flood. REPAIR AND SALVAGE; EXTENT USABLE: Spans: All. Piers: All. Abutments: Both. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary: For heavy traffic loads, bents to be rebuilt and spans restored. 131 REPAIRS NECESSARY TO PLACE IN SERVICE—Continued Permanent: Restore two spans and two bents. Also restore coping for railings and repair part of the railings. REMARKS: P ortion of two spans, continuous section unsupported for complete length. Bridge opened to light traffic. PHOTOGRAPHS: No. Direction and title 71 Looking north at west elevation of bridge over Ota-Gawa. Flood damage. Su- perficial damage to concrete coping by blast, BRIDGE 26 Coordinates: 3H Over River: Ota-Gawa. Distance from “Zero Point”: Plan, 5,750; slant, 6,100. USE: Railroad. DESIGN TYPE: Plate girder. MATERIALS USED: Longitudinal member: Seventy-eight inches in depth. Decking: Ties and rails. Abutments: Concrete. Piers: Concrete faced with brick. SPECIAL FEATURES: Bridge skewed slightly. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: Bridge would carry normal railroad loadings. Comparable with similar structures in United States. QUALITY OF CONSTRUCTION AND MA- TERIALS: Comparable with similar struc- tures in United States. Materials good for con- crete and masonry. DAMAGE—EXTENT: No structural damage to girders. Discoloring of old paint due to bomb effects along the south side of bridge. North face unaffected. CAUSE: None. REPAIR AND SALVAGE: EXTENT USABLE: Spans: All. Piers: All. Abutments: Both. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary: None. Permanent: None. REMARKS: Carries a double-track railroad. PHOTOGRAPHS: No. Direction and title 72 South elevation of undamaged, double- track railroad bridge over Ota-Gawa. 78 Paint on the south elevation of girders discolored by exposure to bomb effects. 74 Paint on the north elevation of girders unaffected by bomb effects. BRIDGE 27 Coordinates: 3G Over River: Temma-Gawa. Distance from “Zero Point”; Plan, 4,360; slant, 4,790. USE: Highway and pedestrian. DESIGN TYPE: Steel arch. MATERIALS USED: Longitudinal member : Box chord. Top mem- bers of truss. Decking: Reinforced concrete with asphalt wearing surface. Abutments: Concrete. Piers: None. SPECIAL FEATURES: Tied arch at anchorage with 5- by 8-inch I-section vertical members. No diagonal bracing. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES; Below United States standards principally because of lower design loads. QUALITY OF CONSTRUCTION AND MA- TERIALS: The design, details and arrange- ments of the bridge structure were below United States standards. Quality of materials good for masonry. DAMAGE—EXTENT: None. CAUSE: None. REPAIR AND SALVAGE: EXTENT USABLE: Spans: Entire single span. Piers: None used. Abutments: Both. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary: None. Permanent : None. REMARKS: Carrying a 10-inch water main. 132 PHOTOGRAPHS: No. Direction and title 75 West eleVation of bridge over the Tenima- Gawa undamaged. Paint on the mem- bers of the east elevation were dis- colored by exposure to bomb effects. Steel members of the wTest elevation were slightly discolored. BRIDGE 28 Coordinates: 3G Over River: Temrna-Gawa, Distance from “Zero Point”: Plan, 1,430; slant, 4,840. 1 SE; Highway, pedestrian and trolley. DESIGN TYPE: Timber superstructure on pile bents. MATER IALS USED: Longitudinal member: Timber beams. Decking; Timber, Abutments: Concrete. Piers : Timber pile bents. SPECIAL FEATURES: None. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: Not ascer- tainable. QUALITY OF CONSTRUCTION AND MA- TERIALS: Not ascertainable. DAMAGE—EXTENT: Complete destruction. CAUSE: Flood. REPAIR AND SALVAGE; EXTENT USABLE: Spans: None. Piers: None, Abutments: Both. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary: Permanent: New7 bridge required. REMARKS: Constant replacement of piling re- quired after floods. PHOTOGRAPHS: No. Direction and title 76 Looking north at remains of bridge at north abutment over tne Temma-Gawa destroyed by flood. BRIDGE 29 Coordinates: 5G Over River: Ota-Gawa. Distance from “Zero Point”: Plan, 1,190; slant, 2,310. 1SE; Highway and pedestrian. DESIGN TYPE; Steel truss. MATERIALS USED: Longitudinal member: Box chord for top members of truss. Eye-bars for tension members. Decking; Timber. Abutments: Concrete faced with masonr}7. Piers; Concrete faced with masonry. SPECIAL FEATURES: Pin-connected steel truss of unusUal design. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: Below United States standards principally because of lower design loads. QUALITY OF CONSTRUCTION AND MA- TERIALS: The design, details and arrange- ments of the bridge structure were below United States standard. Quality of materials fair for timber and good for masonry and concrete. DAMAGE—EXTENT: Complete destruction. CAUSE: Blast. REPAIR AND SALVAGE: EXTENT USABLE: Spans: None. Piers: All, Abutments: Both. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary: Three new spans. Permanent: New7 bridge required with the ex- ception of piers and abutment. REMARKS: Carries 16-inch water main. PHOTOGRAPHS: No. Direction and title 77 Looking north at remains of bridge over the Ota-Gawa. Destroyed by blast. 78 Looking northeast at southwest corner, destroyed by blast. 79 Looking south at east abutment. Bridge destroyed by blast. 80 Looking east at debris of bridge structure at west abutment. Bridge destroyed by blast. BRIDGE 30 Coordinates: 5G Over River: Ota-Gawa. Distance from “Zero Point”: Plan, 1,930; slant, 2,800. USE: Highway and pedestrian. DESIGN TYPE: Reinforced concrete. 133 MATERIALS USED: Longitudinal member: Seven reinforced-con- crete beams, 12 by 36 inch per span. Decking: Reinforced concrete (6-inch) with asphalt wearing surface. Abutments: Concrete. Piers: Concrete bents. SPECIAL FEATURES: Longitudinal beams were haunched at supports. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: Below United States Standards principally because of lower design loads, QUALITY OF CONSTRUCTION AND MA- TERIALS: The design, details, and arrange- ments of the bridge structure were below United States standards. Quality of material good. DAMAGE — EXTENT: Severe. Four center spans destroyed and second span from west end being held by reinforcing steel, at pier adjacent to west abutment. Major portion of railing destroyed. CAUSE: Flood. REPAIR AND SALVAGE: EXTENT USABLE: Spans: Two spans near east end and one span near west end. Piers: Two bents near east end and one pier near west end. Abutments: Both. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary: Rebuild four spans and three bents between existing structures. Permanent: Restore four spans and three concrete bents, also replace railings. REMARKS: Nearest rein forced-concrete bridge to the zero point. PHOTOGRAPHS: No. Direction and title 81 Looking north at flood-damaged highway bridge over the Ota-Gawa. 82 Roadway deck and girder reinforcing steel. 83 Steel reinforcement in concrete girder. 84 Roadway deck and girder, reinforcing steel. BRIDGE 30A Coordinates: 5G Over River: Ota-Gawa. Distance from “Zero Point”: Plan, 1,880; slant, 2,750. USE: Water crossing. DESIGN TYPE: Steel truss. MATERIALS USED: Longitudinal member: 3- by 3- by %-inch angles. Decking: 2- by 2- by angles, 1/4- by 2-inch bars comprising the steel bracing. Abutments: Stone masonry. Piers: Concrete. SPECIAL FEATURES: Bow truss. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: Bridge would carry normal aqueduct loadings. Comparable with similar structures in United States. QUALITY OF CONSTRUCTION AND MA- TERIALS : Comparable with similar struc- tures in United States. Materials good for con- crete and masonry. DAMAGE—EXTENT: Slight. Steel members of truss slightly deformed. CAUSE: Blast. REPAIR AND SALVAGE: EXTENT USABLE: Spans: All. Piers: All. Abutments: Both. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary: None. Permanent: None. REMARKS: Aqueduct, carrying a 16-inch water line. PHOTOGRAPHS: No. Direction and title 85 North elevation of bridge over the Ota- Gawa slightly damaged by blast. Aqueduct carrying a 16-inch water main. 86 Looking northeast at corner of west abutment. Steel truss members slightly damaged by blast. Note damaged cov- ering of 16-inch water main. BRIDGE 31 Coordinates: 6G Over River: Ota-Gawa. Distance from “Zero Point”: Plan, 4,570; slant, 5,000. USE: Highway and pedestrian. DESIGN TYPE: Reinforced concrete. 134 MATERIALS USED: Longitudinal member: Seven reinforced-con- crete beams, 16 by 20 inch per span. Decking: Reinforced concrete with asphalt wearing surface. Abutments: Concrete. Piers: Concrete bents. SPECIAL FEATURES: Longitudinal beams were haunched at support. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: Below United States standards principally because of lower design loads. QUALITY OF CONSTRUCTION AND MA- TERIALS : The design, details and arrange- ments of the bridge structure were below United States standards. Quality of materials good. DAMAGE—EXTENT: Severe, All spans de- stroyed except one on east end and four spans on the west end of bridge. Railing, also, partly destroyed. CAUSE: Flood. KEPAIR AND SALVAGE: EXTENT USABLE: Spans: Four near west end and one span near east end. Piers: Five concrete bents. Abutments: Both. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary: Rebuild seven spans and six bents. Permanent: Restore seven concrete spans and six concrete bents; also, replace railings. REMARKS: Carrying 16-inch water main along the north side by bents. PHOTOGRAPHS: No. Direction and title 87 Looking south at flood-damaged highway bridge over the Ota-Gawa. Top portion of the northwest corner post dislodged by blast. BRIDGE 32 Coordinates: 7E, F Over River: Temma-Gawa. Distance from “Zero Point”: Plan, 0,400; slant, 9,600. USE : Highway and pedestrian. DESIGN TYPE: Timber superstructure on pile bents. MATERIALS USED ; Longitudinal member: Seven log beams (12- inch diameter) per span. Decking: Four-inch logs. Abutments: Stone masonry. Piers: Five piles, 12-inch diameter per bent. SPECIAL FEATURES: Unusual deck construc- tion, More diagonal bracing than ordinary. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: Below United States standards, lower design loads. QUALITY OF CONSTRUCTION AND MA- TERIALS; The design, details and arrange- ments of the bridge structure were below United States standards. Quality of material fair. DAMAGE—EXTENT; Severe. CAUSE: The center portion of bridge severely damaged by Hood. REPAIR AND SALVAGE: EXTENT USABLE: Spans: Approximately 16. Piers: Approximately 16. Abutments: Both. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary: Replace 15 bents and 16 spans. Permanent: Replace 15 bents and 16 spans. REMARKS: Constant replacement of piling re- quired after floods. PHOTOGRAPHS: No. Direction and title 88 Looking north at flood damaged highway bridge over the Temma-Gawa. BRIDGE 33 Coordinates: 6F Over River: Temma-Gawa. Distance from “Zero Point”: Plan, 5,300; slant, 5,650. USE: Highway and pedestrian. DESIGN TYPE: Reinforced concrete. MATERIALS USED: Longitudinal member: Five reinforced-con- crete beams, 13 by 18 inch per span. Decking: Reinforced concrete with asphalt wearing surface. Abutments: Concrete. Piers: Concrete bents. SPECIAL FEATURES: Longitudinal beams were haunched at supports. 135 HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: Below United States standards, principally because of lower design loads. QUALITY OF CONSTRUCTION AND MA- TERIALS: The design, details, and arrange- ments of the bridge structure were below United States standards. Quality of materials good. DAMAGE—EXTENT: Severe. Eight s p a n s and seven concrete bents completely destroyed. CAUSE: Flood. REPAIR AND SALVAGE: EXTENT USABLE: Spans: Four adjacent to west abutment. Piers: Three concrete bents. Abutments: Both. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary: Rebuild eight spans and seven bents. Permanent: Restore eight concrete spans and seven concrete bents; also, replace railings. REMARKS: Carrying 16-inch water main by bents. PHOTOGRAPHS: No. Direction and title 89 Looking west at flood damaged bridge over the Temma-Gawa. BRIDGE 34 Coordinates: 5G Over River: Temma-Gawa. Distance from “Zero Point”: Plan, 3,700; slant, 4,200. USE: Highway and pedestrian. DESIGN TYPE: Timber superstructure on pile bents. MATERIALS USED: Longitudinal member: Timber beam. Decking: Timber. Abutments: Stone masonry. Piers: Four piles per bent. SPECIAL FEATURES: None. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: Not ascer- tainable. QUALITY OF CONSTRUCTION AND MA- TERIALS: Not ascertainable. DAMAGE—EXTENT: Complete destruction. CAUSE: Spreading of fires from adjacent build- ings. REPAIR AND SALVAGE: EXTENT USABLE: Spans: None. Piers; None. Abutments: Both. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary : Permanent: New bridge required. REMARKS: Constant replacement of piling after floods. PHOTOGRAPHS: No. i Direction and title 90 Looking west at timber bridge over the Temma-Gawa, completely destroyed by fire. BRIDGE 35 Coordinates: 5G Over River: Temma-Gawa. Distance from ‘‘Zero Point”: Plan, 3,190; slant, 3,750. USE: Trolley (double track). DESIGN TYPE: I-beam girder. MATERIALS USED: Longitudinal member: I-beam (24-inch) with angle stiffeners. Decking: Ties and rails. Abutments: Stone. Piers: H-column bents with diagonal bracing. SPECIAL FEATURES: Steel H-column poles carrying trolley overhead electric system, HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: Below United States standards; lower design loads. QUALITY OF CONSTRUCTION AND MA- TERIALS: The design, details and arrange- ments of the bridge structure were below United States standards. Quality of material fair for timber. DAMAGE—EXTENT: Complete destruction. CAUSE: Flood. REPAIR AND SALVAGE: EXTENT USABLE: Spans: None. Piers: None. Abutments; Both. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary: Permanent: New bridge required. REMARKS: Carried a double-track trolley line. 136 PHOTOGRAPHS: Direction and title 98 Looking north at remains of bridge (at east abutment) over the Temma-Gawa, completely destroyed by flood. 92 Looking west at remains of trolley bridge (at west abutment) destroyed by flood. BRIDGE 36 Coordinates: 5G Over River: Temma-Gawa. Distance from “Zero Point”: Plan, 3,200; slant, 3,760. USE: Pedestrian, DESIGN TYPE: Timber superstructure on pile bents. materials used: Longitudinal member: Five log beams (12- inch diameter) per span. Decking: Timber, 2 by 6 inches. Abutments: Stone masonry. Piers: Three pile (12-inch diameter) bents. SPECIAL FEATURES: None. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: Not ascer- tainable. QUALITY OF CONSTRUCTION AND MA- TERIALS: Not ascertainable. DAMAGE—EXTENT: Complete destruction. CAUSE: Flood. REPAIR AND SALVAGE: EXTENT USABLE: Spans: None. Piers: None. Abutments: Both. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary: Permanent: New bridge required. REMARKS: Constant replacement of piling re- quired after floods. PHOTOGRAPHS: No. Direction and title 93 Looking west at remains of bridge (east and west abutments) over the Temma- Gawa, completely destroyed by flood. BRIDGE 37 Coordinates; 5G Over River: Temma-Gawa. Distance from “Zero Point”: Plan, 3,220; slant, 3,770. USE; Highway and pedestrian. DESIGN TYPE: Plate girder. MATERIALS USED: Longitudinal member: Fifty inches in depth. Decking: Timber, 4 by 12 inches. Abutments: Concrete. Piers: Concrete. SPECIAL FEATURES: Fourteen-inch water main carried by brackets along the south side. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: Below United States standards; lower design loads. QUALITY OF CONSTRUCTION AND MA- TERIALS: The design, details, and arrange- ments of the bridge structure were below United States standards. Quality of material fair for wood. DAMAGE—EXTENT: Severe. Two spans and one pier completely destroyed, adjacent to west abutment. CAUSE: Flood. REPAIR AND SALVAGE: EXTENT USABLE: Spans: Two. Piers: Two. Abutments: Both. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary: One pier and two spans. Permanent: One pier and two spans. REMARKS: Destroyed spans being replaced by timber construction to permit immediate use of the bridge. PHOTOGRAPHS: No. Direction and title 94 Looking north at plate girder, timber- decked highway bridge over the Tem- ma-Gawa. Westerly portion severely damaged by flood. Fourteen-inch water main carried by brackets along the south side. BRIDGE 38 Coordinates: 4G Over River: Temma-Gawa. Distance from “Zero Point”: Plan, 3,750; slant, 4,250. USE: Highway and pedestrian. DESIGN TYPE: Timber superstructure on pile bents. 137 MATERIALS USED: Longitudinal member : Timber beams. Decking: Timber. Abutments: Stone masonry. Piers: Four piles (10-inch diameter) per bent. SPECIAL FEATURES: None. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: Not ascer- tainable. QUALITY OF CONSTRUCTION AND MA- TERIALS: Not ascertainable. DAMAGE—EXTENT: Complete destruction. CAUSE: Westerly half severely damaged by fire, later completely destroyed by flood. REPAIR AND SALVAGE: EXTENT USABLE: Spans: None. Piers: None. Abutments: Both. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary: Permanent: New bridge required. REMARKS: Constant replacement of piling re- quired after floods. PHOTOGRAPHS: No. Direction and title 95 Looking west at remains of timber bridge over the Temma-Gawa severely dam- aged by fire (west half) and completely destroyed by flood. BRIDGE 39 Coordinates: 4G Over River: Temma-Gawa. Distance from “Zero Point”: Plan, 3,880; slant, 4,390. USE: Highway and pedestrian. DESIGN TYPE: Timber superstructure on pile bents. MATERIALS USED: Longitudinal member: Seven timber beams, 6- by 14-ineh, per span. Decking: Timber, 2 10 inches. Abutments: Stone masonry. Piers: Four piles per bent. SPECIAL FEATURES: None. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES : Not ascertain- able. QUALITY OF CONSTRUCTION AND MA- TERIALS: Not ascertainable. DAMAGE—EXTENT: Complete destruction. CAUSE ; Easterly third severely damaged by fire, later completely destroyed by flood. REPAIR AND SALVAGE: EXTENT USABLE: Spans: None. Piers: None. Abutments: Both. REPAIRS NECESSARY TO PLACE IN SERVICE; Temporary; Permanent: New bridge required. REMARKS: Constant replacement of piling, required after floods. PHOTOGRAPHS: No. Direction and title 96 Looking northwest at remains of timber bridge over the Temma-Gawa severely damaged by fire, easterly one-third and completely destroyed by flood. BRIDGE 40 Coordinates: 3G Over River: Fukushima-Gawa. Distance from ‘‘Zero Point”: Plan, 5,360; slant, 5,700. USE: Highway and pedestrian. DESIGN TYPE: Timber superstructure on pile bents. MATERIALS USED; Longitudinal member: Seven timber beams, 6 by 14 inch per span. Decking: Timber, 2 by 10 inches. Abutments: Concrete. Piers: Four piles, 10-inch diameter per bent. SPECIAL FEATURES: Used stapled connec- tions rather than steel bolt. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: Below United States standards; lower design loads. QUALITY OF CONSTRUCTION AND MA- TERIALS: The design, details and arrange- ments of the bridge structure were below United States standards. Quality of material fair. DAMAGE—EXTENT: Severe. CAUSE; The northerly portion of bridge severely damaged by fire, REPAIR AND SALVAGE: 138 EXTENT USABLE: Spans; Eight (southerly portion of bridge). Piers: Eight (southerly portion of bridge). Abutments: Both. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary: Replace 10 spans and 9 bents. Permanent : Replace 11 spans 10 bents. REMARKS: Constant replacement of piling re- quired after floods. PHOTOGRAPHS: Direction and title •b Looking at bridge over the Fukushima- Gawa, northerly portion severely dam- aged by fire. BRIDGE 41 Coordinates: 3F Over River: Between Yamate-Gawa and Fuku- shima-Gawa. Distance from “Zero Point”: Plan, 6,150; slant, 6,460. USE: II ighway and pedestrian. DESIGN TYPE: Reinforced concrete. materials used: Longitudinal member: Four reinforced-con- crete beams, 12 by 14 inch per span. Decking: Reinforced concrete (8-inch). Abutments: Concrete. Piers: Concrete bents. SPECIAL FEATURES: Longitudinal beams were Launched. Simply supported. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: Below United States standards principally because of lower design loads. QUALITY OF CONSTRUCTION AND MA- TERIALS: The design, details and arrange- ments of the bridge structure were below United States standards. Quality of materials good. DAMAGE—EXTENT: None. CAUSE: None. REPAIR AND SALVAGE: EXTENT USABLE: Spans: All. Piers: All. Abutments: Both. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary: None. Permanent: None. REMARKS: Structure well protected from blast. PHOTOGRAPHS: No. Direction and title 98 Looking west at undamaged concrete bridge between the Yamate Gawa and the Fukushima Gawa. BRIDGE 42 Coordinates: 4F Over River: Fukushima-Gawa. Distance from “Zero Point”: Plan, 5,100; slant, 5,490. USE: H ighway and pedestrian, DESIGN TYPE: Timber superstructure on pile bents. MATERIALS USED: Longitudinal member: Timber beams. Decking; Timber, 2 by 0 inches. Abutments: Stone masonry and timber. Piers: Four piles (10-inch diameter) per bent. SPECIAL FEATURES: None. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: Below United States standards; lower design loads. QUALITY OF CONSTRUCTION AND MA- TERIALS: The design, details and arrange- ments of the bridge structure were below United States standards. Quality of materials fair. DAMAGE—EXTENT: Complete destruction. CAUSE: Bridge completely destroyed by hood with the exception of one span near the west abutment and two bents. REPAIR AND SALVAGE: EXTENT USABLE: Spans: One. Piers: Two. Abutments: Both. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary: Replace 13 spans and 13 bents. Permanent: New bridge required. REMARKS: Constant replacement of piling re- quired after floods. PHOTOGRAPHS: No. Direction and title 99 Looking west at remains of timber bridge (east and west abutments) over the Fukushima-Gawa destroyed by flood. BRIDGE 43 Coordinates: 4F Over River: Fukushima-Gawa. 731568—47 10 139 Distance from “Zero Point”: Plant, 5,180; slant, 5,510. USE : Highway and pedestrian. DESIGN TYPE: Timber superstructure on pile- bents. MATERIALS USED: Longitudinal member: Timber logs 4 per span. Decking: Timber. Abutments: Stone masonry. Piers: Four piers per bent. SPECIAL FEATURES: None. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: Not ascer- tainable. QUALITY OF CONSTRUCTION AND MA- TERIALS : Not ascertainable, DAMAGE—EXTENT: Complete destruction. CAUSE: The two mid-spans initially damaged by blast, later completely destroy ed by fire which spread to adjacent buildings. REPAIR AND SALVAGE: EXTENT USABLE: Spans: None. Piers: None. Abutments: Both. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary: Permanent : New bridge required. REMARKS: A new timber bridge was erected for urgent use immediately after blast and fire damage. PHOTOGRAPHS: No. Direction and title 100 Looking south at north elevation of newly constructed timber bridge over the Fukushirna-Gawa. Old bridge was destroyed by blast and fire. BRIDGE 44 Coordinates: 4F and 5F Over River: Fukushima-Gawa. Distance from “Zero Point”: Plan, 5,300; slant, 5,650. USE: Trolley. DESIGN TYPE: I-beam girder. MATERIALS USED: Longitudinal member: I-beam 24-inch with angle stiffeners. Decking: Ties and trolley rails. Abutments: Stone. MATERIALS USED—Continued Piers: Four H columns per bent with diagonal bracing. H columns set in concrete. SPECIAL FEATURES: Steel, H-column, elec- tric poles carrying trolley overhead system. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDOES: Below United States standards; lower design loads. QUALITY OF CONSTRUCTION AND MA- TERIALS: The design, details and arrange- ments of the bridge structure were below United States standards. Quality of material fair for timber. DAMAGE—EXTENT: None. CAUSE: None. REPAIR AND SALVAGE: EXTENT USABLE: Spans: All. Piers: All. Abutments: Both, REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary: None. Permanent: None. REMARKS: Carrying a double-track trolley line. PHOTOGRAPHS: No. Direction and title 101 Looking northwest at the southeast area of undamaged trolley bridge over the Fukushima-Gawa. BRIDGE 45 Coordinates: 5E Over River: Fukushima-Gawa. Distance from “Zero Point”: Plan, 7,010; slant, 7,300. USE; Highway and pedestrian. DESIGN TYPE: Reinforced concrete. MATERIALS USED: Longitudinal member: Five reinforced-con- crete beams, 13 by 18 inch per span. Decking: Reinforced concrete (8-inch) with asphalt wearing surface. Abutments: Concrete, Piers: Concrete bents. SPECIAL FEATURES: Longitudinal beams were haunched at supports. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: Below United States standards principally because of lower design loads. 5,510. 140 QUALITY of construction and MA- 1ERIALS: The design, details and arrange- ments of the bridge structure were below United States standards. Quality of materials good. DAMAGE—EXTENT: Moderate. Two con- crete spans and two concrete bents near east abutment partly damaged due to settlement. Railing also partly damaged at the southeast and northeast corners. CAUSE: Flood. REPAIR and SALVAGE: EXTENT USABLE: Spans: All. Piers: All. Abutments: Both. REPAIRS necessary to place in SERVICE: Temporary; None. Permanent: Restore two concrete spans and bents. Also replace damaged railings. REMARKS: Bri dge opened to light traffic, PHOTOGRAPHS: No. Direction and title 102 Looking northwest at the southeast area of concrete highway bridge over the Fukushima-Gawa moderately dam- aged by flood. BRIDGE 46 Coordinates: 5E Over River: Yamate-Gawa. instance from “Zero Point”: Plan, 8,090; slant, 8,350. L SE: Highway and pedestrian. DESIGN TYPE: Timber superstructure on pile bents. materials used: Longitudinal member: Timber beams. .Decking: Timber. Abutments: Stone masonry. Piers: Four piles per bent. SPECIAL FEATURES; None. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: Not ascer- tainable. QUALITY OF CONSTRUCTION AND MA- TERIALS : Not ascertainable. DAMAGE—EXTENT: Complete destruction. CAUSE: Flood. REPAIR AND SALVAGE: EXTENT USABLE: Spans: None. Piers: None. Abutments: Both. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary : Permanent: New bridge required. REMARKS: Constant replacement of piling re- quired after floods. PHOTOGRAPHS: No. Direction and title 103 Looking west at remains of timber bridge over the Yamate-Gawa com- pletely destroyed by Hood. BRIDGE 47 Coordinates: 4E Over River: Yamate-Gawa. Distance from “Zero Point”; Plan, 7,450; slant, 7,700. USE: Trolley. DESIGN TYPE: I-beam girder. MATERIALS USED: Longitudinal member: I-beam 24 inch with angle stiffeners. Decking: Ties and trolley rails. Abutments: Stone and concrete. Piers: Four H-columns per bent with diago- nal bracing. H-columns set in concrete. SPECIAL FEATURES: Steel H-column, elec- tric poles carrying trolley overhead system. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: Below United States standards; lower design loads. QUALITY OF CONSTRUCTION AND MA- TERIALS; The design, details and arrange- ments of the bridge structure were below United States standards. Quality of material fair for timber. DAMAGE—EXTENT: None. CAUSE: None. REPAIR AND SALVAGE: EXTENT USABLE: Spans: All. Piers: All. Abutments: Both. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary: None. Permanent: None, 141 REMARKS; Furthermost trolley bridge from tbe zero point. Carrying double-track trolley line. PHOTOGRAPHS: No. Direction and title 104 Looking at undamaged trolley bridge over the Yamate-Gawa. BRIDGE 48 Coordinates ; 4E Over River: Yamate-Gawa. Distance from “Zero Point”: Plan, 7,130; slant, 7,400. USE : Highway and pedestrian. DESIGN TYPE: Plate girder. MATERIALS USED: Longitudinal member: 42 inches in depth. Decking: Reinforced concrete with asphalt wearing surface. Abutments: Concrete. Piers: Concrete with stone facing at croners. SPECIAL FEATURES: Girders not haunched. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: More massive. Generally, the bridges were designed to carry lower loadings than is American practice. QUALITY OF CONSTRUCTION AND MA- TERIALS: The design, details and arrange- ments of the bridge were below United States standards. Quality of materials good for con- crete and masonry. DAMAGE—EXTENT: None. CAUSE: None. REPAIR AND SALVAGE: EXTENT USABLE: Spans: All. Piers; All. Abutments: Both. REPAIRS NECESSARY TO PLACE IN SERVICE; Temporary: None, Permanent: None. REMARKS: Carrying 12- and 14-inch water mains. PHOTOGRAPHS: No. Direction and title 105 Looking north. Showing the south elevation, BRIDGE 49 Coordinates: 3F Over River: Yamate-Gawa. Distance from “Zero Point”: Plan, 6,380; slant, 6,650. USE: Pedestrian. DESIGN TYPE; Timber superstructure on bents. MATERIALS USED: Longitudinal member: Decking: Timber. Abutments: Stone masonry. Piers: Two piles per bent. SPECIAL FEATURES: None. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: Not ascer- tainable. QUALITY OF CONSTRUCTION AND MA- TERIALS: Not ascertainable. DAMAGE—EXTENT: Complete destruction. CAUSE: Flood. REPAIR AND SALVAGE: EXTENT USABLE: Spans: None. Piers: None. Abutments; None. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary: Permanent : New bridge required. REMARKS: Constant replacement of piling re- quired after floods. PHOTOGRAPHS: No. Direction and title 106 Looking northwest at remains of timber foot bridge over tbe Yamate-Gawa destroyed by flood. BRIDGE 50 Coordinates: 3G Over River; Yamate-Gawa. Distance from “Zero Point”: Plan, 6,580; slant, 6,900. USE: Railroad. DESIGN TYPE: Plate girder. MATERIALS USED; Longitudinal member: Forty-nine inches in depth. Decking: Ties and rails. Abutments: Concrete. Piers: Concrete faced with brick masonry at corners. SPECIAL FEATURES: Skewed approximately 45°. 142 HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: Bridge would carry normal railroad loadings. Comparable with similar structures in United States. QUALITY of construction and MA- I LRIALS: Comparable with similar struc- tures in United States. Materials good for con- crete and masonry. DAMAGE-EXTENT: No structural damage to girders, only discoloring of old paint along the south face of bridge. North face unaffected. ( AT SE: Bomb effects. REPAIR AND SALVAGE: EXTENT USABLE: Spans: All. Piers: All. Abutments: Both. Repairs necessary to place in SERVICE: Temporary: None. Permanent: None. REMARKS: Carrying a double-track railroad line. PHOTOGRAPHS: No. Direction and title 107 South elevation. Undamaged plate- girder, railroad bridge over the Ya- mate-Gawa. Paint of girders on the south elevation slightly discolored by exposure to bomb effects. North ele- vation unaffected by bomb effects. BRIDGE 51 Coordinates: 3G Over River: Underpass. Distance from “Zero Point”: Plan, 6,450; slant, 6,780. USE; Railroad. DESIGN TYPE; Plate girder. materials used: Longitudinal member: Forty-eight and 36 inches in depth. Decking: Ties and rails. Abutments: Concrete. Piers: Concrete, SPECIAL FEATURES: Skewed approximately 45°. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: Bridges would carry normal railroad loads. Comparable with similar structures in United States. QUALITY OF CONSTRUCTION AND MA- TERIALS : Comparable with similar structures in United States. Materials good for concrete and masonry. DAMAGE—EXTENT; No structural damage to girders. Only discoloring of old paint due to bomb effects along the south face of bridge. North face unaffected. CAUSE: Bomb effects. REPAIR AND SALVAGE: EXTENT USABLE: Spans: All. Piers: All. Abutments: Both. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary: None. Permanent: None. REMARKS: Carrying a (Rouble-track railroad line. PHOTOGRAPHS: No. Direction and title 108 South elevation. Undamaged, plate- girder, railroad bridge and underpass. Paint of girders on the south eleva- vation slightly discolored by exposures to bomb effects. North elevation un- affected by bomb effects. 109 Showing printed information on the face of the north plate girder at east abut- ment, Cooper E-40 loading. BRIDGE 52 Coordinates: 8J Over River: Creek. Distance from “Zero Point”: Plan, 12,200; slant, 12,450. USE : Highway and pedestrian. DESIGN TYPE: Reinforced concrete. MATERIALS USED: Longitudinal member: Three reinforced-con- crete beams, 13 by 21 inch per span. Decking: Seven-inch reinforced concrete. Abutments: Concrete, Piers: Concrete, SPECIAL FEATURES: Longitudinal beams were haunched at support with cantilever spans at center of bridge. HOW DOES STRENGTH COMPARE WITH UNITED STATES BRIDGES: Below United States standards principally because of lower design loads. 143 QUALITY OF CONSTRUCTION AND MA- TERIALS: The design, details, and arrange- ments of the bridge structure were below United States standards. Quality of materials good. DAMAGE—EXTENT: None. CAUSE: None. REPAIR AND SALVAGE: EXTENT USABLE: Spans: All. Piers: All. Abutments: Both. REPAIRS NECESSARY TO PLACE IN SERVICE: Temporary: None. Permanent: None. REMARKS: Furthermost bridge from the zero point. PHOTOGRAPHS: No. Direction and title 110 General oblique view showing most re- mote bridge included in study, 12,200 feet to GZ, 12,450 feet to AZ. 144 SECTION XIII DAMAGE TO SERVICES AND UTILITIES Page Part A. Electric railway and bus system 146 B. Government railroad system 170 C. Electric generating and distribution system 188 IX Telephone communications system 212 E. Water supply system 226 F. Sanitary and storm sewer system 268 G. Domestic gas system 287 Photos 1-164, inclusive. figures 1-51, inclusive. 1 ables 1-42, inclusive. 145 A. CITY ELECTRIC RAILWAY AND BUS SYSTEM 1. Summary a. Traffic. Hiroshima, a city of approximately 245.000 persons, depended almost entirely upon the Hiroshima Electric Railway Co., Inc., for transportation within the city itself and to the outlying districts, including the resort town of Miyajima, about 10 miles to the southwest. The greatest recorded passenger traffic per month was 4.200.000 persons within the city and 800,000 per- sons using the Miyajima line during July 1945. h. Equipment. The Sendamachi station, with the main offices, converter station, and warehouses and repair units within the station area was the base of operations. The Yagurashita converter station was situated in another part of town and divided the power output required to operate the system. Figure 1 shows the location of the sta- tions and the extent of the railway system. Both stations, Sendamachi and Yagurashita, received electrical power from the Chugoku Electric Co., of Hiroshima, at 22 kilowatts AC, transforming and converting the alternating current to 600 volts DC, which was the operating voltage. c. Street Railway Cars. The railway company operated 123 cars, the largest of which weighed 18 tons empty and 26 tons loaded, and was rated at 37.3 kilowatts. An overhead system provided elec- tric power to the cars for operation. d. Transmission System. The overhead system was supported by wood, steel, and concrete poles, and a single copper conductor per pair of rails provided the electric power for the street railway cars. The entire 15.5 miles of the system within the city were double track, as were 6 of the 10 miles of the Miyajima section. The rails were of United States and Japanese manufacture, having a gauge of 4 feet 8.5 inches, set on 8-inch ties 7 feet long. e. Bridges. Because of the delta formation of the city, 8 bridges constructed of timber and steel were required to complete the track system. /. Buses. The company employed 85 buses to serve areas not reached by street cars. Since gaso- line was so scarce, buses were driven on a gaseous fuel which was produced by a unit carried on each bus as a part of the equipment. g. Damage to Buildings. The atomic bomb ex- ploded at 2,000 feet above ground zero (GZ) which is indicated on Figure 1. Primary blast damage put the whole transportation system out of service. Buildings and equipment at Sendamachi and Yagurashita, 6,700 and 900 feet distant from GZ, respectively, were damaged sufficiently to be in- operative. The extent of damage to buildings and equipment is indicated on Table 1. Fires that fol- lowed completed the destruction at Yagurashita, but the existence of a firebreak north of Senda- machi prevented the ignition of its buildings. The converting equipment at Sandamachi was repaired by 9 August 1945. h. MAE for Buildings. The buildings perti- nent to this report, including installations and equipment (Table 1), are classified by the building damage section of this report. Any conclusions for the mean areas of effectiveness (MAE) con- tained in that section will apply also for buildings in this section. i. Damage to Rolling Stock. Of the 123 cars operated by the company, 25 were damaged by fire and 56 by blast. Of the 85 motor buses, 18 were damaged by fire and 22 by blast. Cars and buses within a radius of 1,500 feet of GZ were ignited hy radiant heat. Because of the nonuniform dis- tribution of the cars and buses no attempt has been made to calculate MAE’s. Maximum and minimum radii for total, heavy, and slight damage, however, have been drawn graphically on Figure 4. j. Damage to Overhead System. Blast and fire damaged 11.4 miles of the overhead transmission system which included 500 wood and 100 steel poles. No damage occurred to concrete poles, the nearest of which were 6,000 feet from GZ. Wood poles were damaged at a maximum distance of 4,500 feet from GZ, and steel poles, 3,500 feet. Overhead transmission cable was blown down by blast at 8,000 feet from GZ. T he steel-rail pole (Type 2, Fig. 3) or its equivalent seemed best suited to support an overhead transmission system for street railway transportation, rather than wood or latticed-steel poles, as a protective measure against an attack of this type. k. Damage to Bridges. With the exception of the bridge crossings (Table 5), no damage occurred to the track system. Since the bridges referred to in this section are covered by the Bridge Damage Section, all data in connection with damage to bridge crossings will be found in Section XII of this report. 2. The System a. The locations of all buildings, substations, and overhead systems of the Hiroshima Electric Railway Co., Inc., are indicated on Figures 1 and 146 HIROSHIMA CITY ELECTRIC RAILWAY AND BUS SYSTEM DAMAGE RADII LIMIT OF BLAST DAMAGE TO OVERHEAD CABLES (8000') LIMITOF FIRE DAMAGE TO TYPE I POLES (6500') LIMIT OF BLAST DAMAGE TO TYPE I POLES (4500') LIMIT OF BLAST DAMAGE TO TYPE 2 POLES (3500' ) LIMIT OF BLAST DAMAGE TO TYPE 4 POLES (3000') LEGEND DAMAGE TO CARS POLE TYPES TOTALLY BURNED HALF BURNED SEVERE DAMAGE MODERATE DAMAGE SLIGHT DAMAGE NO DAMAGE 22 TYPE I-WOOD POLES 3 TYPE 2-STEEL RAIL 23 TYPE 3- LATTICE STEEL 24 TYPE 4-BUILT-UP MEMBER 36 TYPE 5 - CONCRETE POLES 15 (12 ON MIYAGIMA LINE) TROLLEY LINE (RAIL) DAMAGED OVERHEAD TROLLEY LINES HIROSHIMA HIROSHIMA PREFECTURE. HONSHU. JARAN CONTOUR INTERVAL 20 METERS ORIO SYSTEM BASED ON 1000 YARD WORLD POLYCONIC BRIO SECRET U S. STRATEGIC BOMBING SURVEY ELECTRIC RAILWAY SYSTEM HIROSHIMA, JAPAN FIGURE l-XEI 731568 0 - 47 (Face p. 146) 2. With the exception of the areas noted on figure 1, the company served the entire city with street railway transportation, including a connection to Miyajima, a resort approximately 10 miles south- west of Hiroshima with a junction point at Koi. The entire system, including the route to Miya- jima, was electrified. The remaining areas were serviced by motorbuses. Due to the delta forma- tion of Hiroshima made by the Ota River branch- ing into six channels, namely, the Enko, the Kyobashi, the Motoyasu, the Ota, the Temma and the Koi Rivers, a number of bridge crossings was necessary to service each island of the delta. Since there were fewer than 25 private vehicles in Hiro- shima, travel by bus, street railway, or railroad was necessary. Within the city proper the great- est recorded traffic occurred during the month of July 1945. It amounted to 4,200,000 passengers, with an additional 800,000 carried by the Miya- jima branch line. These figures included bus traffic. h. The 26 buildings on Figure 2, dispersed over an area of 4.7 acres, constituted the Sendamachi station which served as offices, repair units, ware- houses and converter station (Buildings 2 and 24 of Fig. 2 are also Buildings 35A and 35B of the Building Damage Section). Figure 1 also indi- cates the Yagurashita station which is a single unit supplying power to that part of the city, and is classified as Building 3 in the Building Damage Section. Usage and areas of buildings on Figure 2 are shown in Table 1. c. The company purchased its electric power from the Chugoku Electric Co., a subsidiary of the Nippon Electric Company, for (he two converter stations at Sendamachi and Yagurashita. Both converter stations received electric power at 22 kilovolt AC and converted it to operating voltages of 660 volts DC. Converting equipment at each station was as follows: (1) Sendamachi converted station: One iron- case rotary converter, German Deutsch type, 500 kilowatt at 600 volts DC, manufactured by the Japan Electric Co., Kyoto, Japan. One motor- generator set, General Electric type MP, 300 kilo- watt at 600 volts DC, manufactured by General Electric Co., U. S. A. 12) Yagurashita converter station: One mer- cury rectifier, glass type, 480 kilowatt at 600 volts DC, manufactured by the Japan Electric Co., Kyoto, Japan. One rotary converter, 500 kilo- watt at 600 volts DC, manufactured by the Shibura Electric Co., Tokyo, Japan. Both stations were capable of supplying power for 100 street railway cars under normal condi- tions. (I. The Hiroshima Electric Co. operated 123 cars, 12 of which were normally routed between Koi and Miyajima. The largest car had a capacity (seated and standing) of 160 passengers, weighed 18 tons empty and 26 tons loaded, and was rated at 37,3 kilowatt at 550 volts DC. The average speed of street railway traffic within the city was 15 miles per hour, while that to Miyajima was ap- proximately 25 miles per hour. Since the city of Hiroshima was practically flat, no problem of over- loads was encountered. Transmission of power was by an overhead system, and pick-up from over- head to car was made by a transverse bar. e. The company operated 85 motorbuses to pro- vide transportation for those areas not served by cars. Due to the lack of gasoline, buses were oper- ated by a gaseous fuel which was produced by each vehicle. Chopped wood or coal was placed in an airtight container, and converted to gases by ex- ternally applied heat. Speeds up to 35 miles per hour were obtained with busses fully loaded. /. The repair units at Sendamachi were capable of repairing 50 cars a month, but at no time were required to handle more than 25. Garages were able to repair approximately 25 buses per month, (/. The overhead system consisted of a single, solid copper conductor attached to steel, concrete, or wood poles for each pair of rails. Figure 3 and Figure 1 indicates the types and locations of the poles. The company maintained 1,000 poles within the city, of which 300 were steel, 670 were wood, and 30 were concrete. All poles were set approximately 150 feet apart. A joint ownership of poles was held by the Hiroshima Electric Rail- way Co., the Chugoku Electric Co., and the Gov- ernment Communications Agency, each maintain- ing the poles it had initially installed. By joint agreement, however, all agencies could attach their transmission systems to any pole. h. The company maintained 15.5 miles of dou- ble track within the city and 6 miles of double track between Koi and Miyajima. It also main- tained 4 miles of single track which met the double track to complete the system between Koi and Miyajima. The type of rail used for the major part of the track system was the Carnegie rail section, weighing 120 pounds per yard, the re- 147 US, STRATEGIC BOMBING SURVEY HIROSHIMA ELEC. RAILWAY CO, LTD. HIROSHIMA, JAPAN FIGURE 2-XKT SECRET SECRET CITY RAILWAY TRANSPORTATION SYSTEM SENDAMACH1 SUBSTATION HIROSHIMA ELECTRIC RAILWAY CO. LTD. STRUCTURAL DAMAGE BY BLAST SUPERFICIAL DAMAGE BY BLAST LEGEND 148 SECRET POLES FOR ELECTRIC RAILWAY SYSTEM TYPE I TYPE 2 TYPE 5 TYPE 4 SECRET U.S. STRATEGIC BOMBING SURVEY ELECT. RAILWAY SYSTEM POLES HIROSHIMA, JAPAN FIGURE 3-23H TYPE 3 149 Table 1—XIII.—Hiroshima city electric railway and bus system buildings—building data [Areas in thousands of square feet] Building Grid Usage Type Plan area Stories Build- ing HE-V Build- ing flre- V Dis- tance A 7. (feet) Total floor area Building dam- age (floor area) Equipment damage Struc- tural damage (blast) Super- ficial damage (blast) Per- cent Cause 1 7H D 7.0 2 V4 C 6,700 14.0 13.6 2 7H Substations-__ _ A2,3 3.0 1 V4 C 6,700 6.0 6.0 3.0 5 Blast. 3 7H D 6.0 1 V4 C 6, 700 6.0 6.0 4 7H D 2.8 1 V4 c 6, 700 2.8 2.8 5 7H D 2.3 1 V4 c 6, 700 2.3 2.3 7H D 3.9 1 V4 c 6, 700 3.9 3.9 7TT D 1.7 1 V4 c 6, 700 1.7 4.7 7H D 9.1 1 V4 c 6,700 9.1 9.1 9 7H D 5.3 1 V4 c 6, 700 5.3 5.3 7H I) 1.1 1 V4 c 6, 700 1.1 1.1 11 7H I) 1. 1 1 V4 c 6, 700 1.1 1.1 19. 7H I) . 1 1 V4 c 6, 700 .1 .1 13 7H D 1.1 1 V4 c 6, 700 1.1 1.1 14 7H D .4 1 V4 c 6,700 .4 .4 7H 1) 6.8 1 V4 c 6, 700 6.8 6.8 18 7H D 5.3 1 V4 c 6,700 5.3 5.3 17 7H D 5.3 1 V4 c 6,700 5.3 5.3 IK 7H D 3.1 1 V4 c 6,700 3.1 3.1 7H D .5 1 V4 c 6, 700 .5 .5 7H D 4. 7 1 V4 c 6,700 4. 7 4.7 91 7H D 2 V4 c 6, 700 .5 .5 7H 1) 2.5 1 V4 c 6,700 2.5 2.5 93 7H D 1. 1 1 V4 c 6,700 1.1 1.1 24 7H K2 2 V3A c 6,700 9.0 3.8 98 7H T) .5 1 V4 c 6,700 .5 .5 7H D .6 1 V4 c 6, 700 .6 .6 Yagura Shita Station.-- 7H Substation- .. .. . A2, 3 3.8 1 V4 c 2,200 3.8 3.8 100 Fire and blast. mainder being a Japanese section approximately 90 pounds per yard, manufactured by the Japan Rail Co., Kyushu. The rails were mounted on 8- by 8-inch ties, 7 feet long. The track gage was 4 feet 8.5 inches, measured between inside faces of rails. As shown on Figure 1, the city proper was built on a delta formation which necessitated a number of bridges to complete the track system. Table 2 lists bridges required for river crossings. (Data are taken from Bridge Damage Section of this report.) Iii the case of jointly owned bridges an agreement was made to facilitate construction and mainte- nance, and to reduce the initial cost to each agency. 3. Analysis of Damage a. The following terms and definitions for build- ing and equipment damage have been used throughout this section: (1) Building. (a) Structural: Damage to principal load- carrying members (trusses, beams, columns, load- bearing walls, floor slabs in multistory buildings) requiring replacement or external support during repairs. Light members, such as purlins and rafters, are not included. (b) Superficial: Damage to purlins and other light members, stripping of roofing and non-load- bearing exterior walls. Damage to glass and in- terior partitions not included. (c) Minor: Damage to glass and interior par- titions, floor surfaces, and interior trimming. (2) Machinery, utilities, and equipment. (a) Total: Not worth repair. (b) Heavy: Requiring repair beyond capacity Table 2.—River crossings Bridge Grid Type Length (feet) Ownership 4 5J R einforced concrete. 246.5 City of Hiroshima; Electric Rail- way Co. 13 51 Steel I-beam .. 297.0 Hiroshima Electric Railway Co. 17 7H Plate girder 644.0 City of Hiroshima; Electric Rail- way Co. 24 4G-H do. 398.0 Preferred Government; Electric Railway Co. 28 30 Timber 224.0 City of Hiroshima; Electric Rail- way Co. 35 50 Steel I-beam... 231.0 Hiroshima Electric Railway Co. 44 4F do 426.0 Do. 47 4E do 351.0 Do. 150 of normal maintenance staff; usually returned to manufacturer. \G) Slight: Requiring repair within capacity °f 1,ormal maintenance staff. b- Of the 26 buildings (Fig. 2) which consti- tuted the Sendamachi station, 6,400 feet from GZ, °tdy Buildings 2 and 24 were usable after the atomic-bomb attack. The remaining structures, which were of wood-frame and timber construction as indicated on Table 1, suffered structural dam- age from blast (Photos 1 and 2). Since no fires started in the Sendamachi area, all damage was Hie result of blast. A firebreak immediately north °f the area prevented the spread of fires to the south and to the Sendamachi area. The Yagura- shita station, which was in another section of the C1ty (Fig. 1) was structurally damaged by blast and fire. Buildings 2 and 24 of the Sendamachi station and the Yagurashita station are listed as Buildings 35A, 35B, and 3, respectively, in Section Damage to Buildings. The extent of damage fo the remaining structures is given in Table 1. c. In order to resume business, a single room in Building 1 was salvaged and used as office space lint, it being insufficient, cars that had been re- paired were utilized temporarily as additional space. d. Because of the extent of damage to the street- nailway and motorbus-repair units and ware- houses, repairs to rolling stock were curtailed from 50 to 10 cars and from 25 to 5 motorbuses per month. e. Equipment damage (Photo 3) in the converter station at Sendamachi was slight. Busbars and electric distribution panels were damaged by either blast or falling debris, but the converter equipment was not short-circuited either by debris or the sud- den power cut-off. Damage to the Sendamachi electric substation, which provided electric power for the converter station and the adjoining vicinity, interrupted electrical distribution in the section. By 9 August 1945, the converter station at Senda- inachi was repaired and operative, the 22-kilovolt lines being shunted around the Sendamachi elec- tric substation, and a direct connection made to the city railway converter station. This action was possible because of the subsurface circuits to the Sendamachi electric substation. Both converters were available for use, but one was sufficient to operate the cars on the portion of track which was not damaged. /. The Yagurashita station equipment, 900 feet from GZ ( Photo 4), suffered total damage by blast and fire. No equipment was salvageable. g. Of the 123 cars operated by the company, 99 were in use at the time of the attack and 24 were held in reserve at the Sendamachi station. Of the 85 motorbuses, TO were being operated while the remaining 15 were under repairs or in reserve. In reporting the damage to rolling stock, the company officials employed other terms and definitions than those used in this report and the combination of both are defined as follows under equipment damage: (1) Total: Not worth repair. Totally burned. (2) Heavy: Requiring repair beyond capacity of normal maintenance staff; usually returned to manufacturer. (a) Partly burned. (&) Severe damage: Sufficient damage to pre- vent use of car. Damaged, collapsed framing; burned-out or damaged motive equipment. (3) Slight : Requiring repair within capacity of normal maintenance staff. (a) Moderate damage: Sufficient to prevent use of car temporarily-damaged seats and damaged motive equipment that could be readily repaired. (l>) Slight damage: Insufficient to prevent use of car—broken windows, displaced seats, but no damaged motive equipment. The number of damaged and burned cars is shown on Figure 1. A summary of damage for both cars and motor busses (Table 3) follows: Table 3.*—Damage to cars and buses OPERATING AT TIME OF BLAST Type of vehicle Damage by burning Damage by blast Total (totally burned) Heavy (partly burned) Heavy (severe) Moder- ate Slight Cars . 22 3 13 16 3 Motor buses. 18 3 2 3 5 AT THE SENDAMACHI STATION Cars 10 8 6 Motor buses 5 4 3 ♦Japanese classification. Of the 15 undamaged cars, 12 were operating on the Koi to Miyajima line; the remaining 3, at 10,- 800 feet from GZ, were protected from the blast by buildings. The 42 undamaged motor buses were 151 also operating in outlying vicinities. Railway of- ficials stated that cars and buses operating within a radius of 1,500 feet of GZ (photo 5) caught fire immediately on the side facing GZ. Observations were made of damage to cars and buses within the 1,500-foot radius. Evidence of ignition by radiant heat was found in a fire lane along the tracks where burned cars had been blown bj blast, substantiating the statements of the railway of- ficials. Cars and buses were blown 30 feet, in some instances, from where they Avere originally standing. Buses adjacent to buildings were dam- aged by falling debris. This was especially true of both cars and buses that were standing in the Sendamachi station (Photos 6 and 7). Rolling stock that Avas burned outside the 1,500-foot radius was ignited by adjacent burning buildings (Photos 8 and 9). Buses were totally damaged 4,000 feet from GZ. and heavily damaged 5,500 feet from GZ. Damaged cars and buses standing in the roadway were removed and placed on side areas in order to facilitate traffic (Photos 10, 11, and 12). The 42 available motor buses permitted some passenger traffic to be maintained. By 9 August 1945 the con- verter station at Sendamachi Avas again in opera- tion and 8 cars were available for use, excluding 12 cars routed to Miyajima. h. The traffic within Hiroshima for the month of October 1945 Avas 800,000 passengers, and 500,- 000 were carried on the Miyajima line, which in- dicated a decrease of 81 percent in traffic rate for Hiroshima, and a 38-percent decrease for the Miyajima line. Because of the reduced speed and small number of cars, the allowable capacity of the large cars was raised from 160 to 200 passen- gers. Bus capacity was also raised approximately 50 percent. i. Because the cars and buses were distributed through the city in a nonuniform manner (i. e., many were concentrated in car barns), it Avas felt that a calculated MAE would have no real signifi- cance. Therefore, a graphical method was chosen for presenting both the actual location of each unit at the time of the atomic-bomb explosion, and the extent of damage suffered by it. Figure 1 shows, the location of each unit at 0815 hours on 6 August 1945, the time of the attack. Figure 4 presents graphically the number of units suffering damage in each of the three categories, total, heavy, and slight, giving the maximum and mini- mum distances at which such damage occurred. No minimum distance is given for total damage, as an examination of the diagram indicates the likelihood that any unit Avithin 2,300 feet of GZ (the minimum distance for units suffering less than total damage) would have suffered total dam- age. Street railway cars were totally damaged up to 6,700 feet and heavily damaged up to 8,400 feet from GZ; buses suffered total and heavy dam- age up to 4,000 feet and 5,500 feet from GZ, respectively. j. Of the 15.5 miles of railway system, 11.4 miles of overhead transmission Avere heavily or totally damaged (Fig. 1) directly as a result of the blast or by fires subsequent to the blast. Results of a survey by the company, accounting for 500 wood poles and 100 steel poles damaged by fire and blast (Photos 15 through 21) owned by them are shown in Table 4, giving the maximum limit of damage. Table 4.—Damage to poles Type of pole Material Damage (distance in feet from GZ) Blast Burned Tilted Type 1 Type 2 Type 4 Type 5 Wood 4, 500 3, 500 3, 000 6, 500 7, 500 3, 500 3, 500 Steel rail Built-up pole Type 3 poles were owned and maintained by the Chugoku Electric Co., but the Hiroshima Railway Co. was allowed the privilege of overhead attach- ment because of the joint agreement previously mentioned. The steel-lattice poles were bent at the base by the force of the blast at 6,000 feet from GZ (Photo 22). The concrete poles at 6,000 feet (Photo 23) from GZ were undamaged. Although poles were intact and standing, the overhead cable was blown down by blast 8,000 feet from GZ (Photo 24). Some new poles necessary to operate the portions of the system in use were installed, and the partly damaged poles were utilized. The whole system was of a temporary nature and re- placement of the majority of the overhead lines would have been essential for continued opera- tions. h. No actual damage to the track system, except at bridges, could be determined either by the rail- way company or by the members of the team. Bridge 13 (Photos 25 and 26) Avas depressed ap- proximately 20 inches, preventing traffic over the Kyobashi River. Bridge 24 Avas subjected to a 152 PHOTO 1-XIII. Blast damage to offices and adjacent buildings at the Sendamachi substation, 6,400 feet from GZ. PHOTO 2-XIII. Blast damage to warehouse at the Sendamachi substation. 153 PHOTO-3-XIII. Converter equipment at Sendamachi Substation, (>,400 feet from GZ. PHOTO-4-XIII. T3arnaged converter equipment at Yagurashita substation, 900 feet from GZ. 154 PHOTO 5-XIII. Damage to car at an intersection 1,000 feet east of GZ. Damaged car to left; others are in operation. PHOTO 6-X1II. Damage to buses at the Sendamachi substation 6,400 feet from GZ. 731568—47 11 155 PHOTO 7-XIII. Damage to cars in car repair unit at Sendamachi substation, 6,400 feet from GZ. PHOTO 8-XIII. Damage to car 2,000 feet southeast of GZ. 156 PHOTO 9--XIII. Damaged car 4,000 feet northwest of GZ. PHOTO 10-XIII. Damaged car 2,000 feet east of GZ. 157 PHOTO 1I-XIIT. Damaged bus 2,500 feet east of GZ. PHOTO 12-XIII. Damage to car 3,000 feet northeast of GZ. 158 PHOTO 13-XI1I. Blast damage to pole and car 4,000 feet southwest from GZ. 159 PHOTO 14-XIII. Blast damage to cars 9,000 feet southwest of GZ. Because of the extent of damage to the overhead transmission system in the Eba area (Fig. 1) no effort was made to put this section of streetcar line in service and con- sequently return the cars in the above photograph to Sendamachi for repairs. 160 U.S. STRATEGIC BOMBING SURVEY) DAMAGE TO TROLLEY CARS HIROSHIMA, JAPAN FIGURE Aim SECRET POSITION OF TROLLEY CARS AT TIME OF ATTACK 0815, 6 AUGUST 1945 LEGEND BLAST DAMAGE DAMAGE BY FIRE DAMAGE BY FIRE (HALF BURNED) 161 PHOTO 15-XIII. Blast damage to steel poles, 600 feet from GZ, and wood pole replacements. PHOTO 16-XI1I. Wood poles broken off at ground by blast 600 feet from GZ. 162 PHOTO 17-XIII. Blast damage to poles 2,000 feet west of GZ. PHOTO 18-XIII. Bent steel and fractured wood poles 3.000 feet southeast of GZ. 163 PHOTO 19-XIII. Blast damage to wood and steel poles 2,500 feet northwest of GZ. PHOTO 20-XIII. Damaged cross arms 3,000 feet west of GZ. PHOTO 21-XIII. Blast damage to steel pole 3,500 feet from GZ. 164 PHOTO 22-XIH. Damage to steel poles 6,000 feet southeast of GZ. PHOTO 23-XIII. Standing concrete poles 6,000 feet east of GZ. PHOTO 24-XIII. Damaged overhead 8,000 feet southeast of GZ. 165 PHO 1 O 25 XIII. Streetcar Bridge (13) damaged by blast and flood, 4,700 feet from GZ. PHOTO 26-XIII. Temporary repairs to stabilize car tracks on Bridge 13. 166 PHOTO 27-XIII. East approach to Bridge 24 showing blast damage. 1,000 feet from GZ. PHOTO 28-XIII. West approach to Bridge 24 showing displaced tracks. 167 PHOTO 29-XIII. Bridge 17 showing high water on 23 October 1945 PHOTO 30-XIII. Flood damage at Bridge 35. Ferry transportation across the Temma-Gawa. 168 PHOTO 31-XIII. Undamaged, street car over-crossing at Bridge 4, 6,500 feet from GZ. PHOTO 32-XIII. Undamaged, street car over-crossing at Bridge 44, 5,300 feet from GZ. 169 severe depressive and rebound action that dis- placed tracks (Photos 27 and 28) on the bridge. In addition to damage attributed to the attack, the severe floods of IT September 1945 and 5 October 1945 damaged Bridges 28 and 35 (Photo 30). Bridge 13 was also further damaged by floods. The following (Table 5) is taken from Section XII. Damage to Bridges, bound herewith, and indicates the damage to bridges in each instance: Bridge 35 during the Hood period hampered trans- portation only insofar that passengers had to cross the river by ferry (Photo 30) or by other bridges on foot, and take the shuttle between Koi and the Temma River. 4, Recommendations and Conclusions a. The Sendamachi station, which was 6,400 feet from GZ, received severe structural damage by blast, but no fire damage. Buildings 2 and 24 (Table 1) suffered only superficial damage, while the remaining buildings, which were poorly con- structed, were structurally damaged. The con- verter station at Sendamachi was only slightly damaged, being housed in Building 2, and was operative in a few days. The Yagurashita sta- tion, at 900 feet from GZ, constructed of brick, was structurally damaged by blast and fire. Thus, dispersal of converter stations offered effective protection against the attack. h. The overhead transmission system main- tained by the city electric railway system was par- ticularly vulnerable to an air-burst bomb of this type. The wood pole, or Type i, although more easily installed and replaced, proved more vul- nerable to blast and fire than the steel-rail pole or Type 2, Comparison of the amount of replace- ment of both types of poles indicates that the type 2 pole, being more resistant to fire and blast, there- fore requiring fewer replacements, is the more practical. Replacement of the overhead conduc- tors could be facilitated on this type of pole, and a greater part of the system would be operative in a shorter time. A subsurface system such as that used in some cities in the United States to elimi- nate an overhead transmission system appears to be the best solution. B. GOVERNMENT RAILROAD SYSTEM 1. Summary a. Location. The Government railways of Japan was the only railway system providing in- tercity transportation for Hiroshima. It main- tained the double-track roadbed called the Sanyo Main Line, as well as classification yards, repaid facilities, transit sheds, and complete station facilities at Hiroshima. A single-track roadbed connected with Ujina, the only deep-water harbor in this area, to provide rail to ship transportation for military material and personnel to continental Asia and other theaters of operations. Transit sheds and stations were also maintained at Koi and Yokogawa, intermediate points within Hiro- Bridge No. Grid No. Dist. from OZ (feet) ! Type Damage classification Cause 4 5J 6, 400 Concrete. .. None __ ... 13 51 4, 600 I-beam. _ Moderate. . .. Blast and flood. 17 711 7, 600 1,000 4,500 3,200 5,300 7, 4(H) Plate girder None 24 28 35 411 do Slight Blast. Flood. Do. 3G 50 Timber I-beam. _ .. Complete destruction do 44 4 F do None 47 4E do do Damage classification is as follows : Complete destruction.—Complete destruction of structure re- quiring replacement of entire bridge or within 10 percent of all spans or bents or both ; damage requiring from 90 to 100 per- cent replacement of spans and piers. Severe damage.-—Complete destruction of the major part of the structure or such damage that would require replacement of more than half of the spans or bents; damage requiring replace- ment of between 50 and 90 percent of the spans and piers. Moderate damage.—Damage or destruction of whole or part of spans or bents of structure that could be replaced or repaired in a relatively short time, the amount of damage not to exceed half of the entire structure, i. e., damage requiring replacement of between 10 and 50 percent of the spans and piers. Slight damage.—Damage to portions of spans or piers of struc- ture that would necessitate a minimum of repair or replacement. Table 5.—Damage to bridges /. Because of damaged poles and overhead sys- tem, the only portion of track usable after the attack was that between the Sendamachi substa- tion and Ujina, but by 12 September 1945 the sec- tion between Koi and the Sendamachi substation via Dobashi, Tokaichimachi, and Takanobashi was placed in service. The Japanese army as- sisted in these repairs in order to facilitate the transportation of personnel. By 12 October 1945 the track system between Kamiyacho and the ter- minal at the government railway station, via Hachobari, Matobacho, and Hiroshimaekimae, was operative but repairs to Bridge 13 had not been completed until 1 November 1945. The only portions of the track system not in operation were those between Tokaichimachi and Yokogawa, Do- bashi and Eba, Hachobari and Hakushima, and Matobacho and Senbaikyokumae. Figure 1 indi- cates the progress of replacement. The loss of 170 HIROSHIMA GOVERNMENT RAILROAD SYSTEM LEGEND DOUBLE TRACK SINGLE TRACK TRACK GAGE 3'-4" HIROSHIMA HIROSHIMA PREFECTURE, HONSHU, JAPAN typical fill section CONTOUR INTERVAL 20 METERS GRID SYSTEM BASED ON 1000 YARD WORLD POLYCONIC GRID U S STRATEGIC BOMBING SURVEY GOVERNMENT RAILROAD SYSTEM HIROSHIMA, JAPAN FIGURE 5-Xm 731568 O - 47 (Face p. 170) No. 1 SECRET LEGEND SUPERFICIAL DAMAGE STRUCTURAL DAMAGE FREIGHT * R&SSEN6ER DERAILED , LOCATION OF TRAINS 6 AUG 45 PLAN OF HIROSHIMA STATION YARD JAPANESE GOVERNMENTAL RAILWAYS SCALE* 1/2500 SECRET U.S. STRATEGIC BOMBING SURVEY PLAN OF STATION YARD HIROSHIMA, JAPAN F10URE 6 TTTT 731568 O - 47 (Face p. 170) No. 2 SECRET PLAN OF HIROSHIMA CLASSIFICATION YARD JAPANESE GOVERNMENTAL RAILWAYS SCALE* 1/2500 legend NO DAMAGE SUPERFICIAL DAMAGE LOCATION OF TRAINS 6 AUG 45 SECRET US STRATEGIC BOMBING SURVEY PLAN OF CLASSFICATION YARD HIROSHIMA, JAPAN FIGURE 7 231 731568 0 - 47 (Face p. 170) No. 3 shima. Figure 5 shows all lines and stations. A total of 8,467 persons was employed by the Govern- ment railways in the Hiroshima area prior to the attack of 6 August 1945. b. Traffic. The average passenger rate per month was 1,824,960 persons; the average monthly tonnage in freight handled was 9,800 tons, requir- ing 620 cars. A total of 6,000 cars per month, however, was shunted through the yards. c. Repair Facilities. The repair facilities were capable of repairing all engines, tenders, and cars, with the exception of the electric cars which were sent to Hatabe, near Kyoto. d. Roadbed. The roadbed in the area was a fill section with a gravel ballast, as shown in Figure 5. e. Bridges. The S a n y o Line crossed the branches of the Ota River to the north, thereby limiting the number of over-crossings to four major, and a number of minor bridges for vehicu- lar traffic, /. Building Damage. The majority of build- ings within the classification and repair area (Fig. 7) which were between the radii of 8,000 and 10,000 feet from (V/ were damaged by blast, while those in the station area (Fig. 6) between the radii of 5,800 and 7,400 feet were damaged by fire. Table 8 indicates the extent of damage to buildings within the Koi and Yokogawa area. All build- ings in this report are classified by the Building Damage Section, and any conclusions drawn therein for the mean areas of effectiveness will also apply to buildings included in this section. There was no repair-equipment damage in the classifica- tion or repair areas. g. Locomotive Damage. There was no damage to locomotives other than glass breakage. b. Car Damage. Of the 700 freight cars in the Hiroshima division, 45 were damaged by fire and 46 by blast, amounting to 13 percent of the total; of the 91 passenger cars, 6 were damaged by fire :md 77 by blast, or 98 percent of the total; and of the 16 electric cars, 6 were damaged by fire and 6 hv blast, or 75 percent of the total. The maximum limit of distance in which probable damage to freight cars might occur was approximately 6,800 feet from GZ, but since 98 percent of the passenger cars were damaged within the 6,800-foot radius and 75 percent of the electric cars were damaged at 6,300 feet, the maximum limit for passenger and electric cars was beyond 6,800 feet from GZ. No passenger cars were found beyond the limits stated. i. Trackage and Bridge Damage. There was no damage to trackage or bridge crossings. Com- munications and signalling facilities were not operative because of damage to the communica- tions office in the station area. j. Cost. The total cost of damage to the Gov- ernment railroads as estimated on 15 November 1945 was 15,800,000 yen, or $8,950,000 at the 4-yen- to-$l rate of exchange. k. Casualties. Of the 8,407 persons employed, 198 were killed, 140 were missing, 934 were seri- ously injured, and 1,195 sustained minor injuries. 2. The System a. The locations of buildings and trackage of the government railways systems for the Hiro- shima District are indicated on Figures 5, 0, and 7, showing repair units, transit sheds, and passen- ger depot. h. The government railways, operating the hulk of the railroad systems in Japan, provided all freight and passenger transportation to and from Hiroshima. As noted on Figure 5, the double- track system known as the Sanyo Main Tune skirts the city in a semicircle. The classification yards, repair yards, and passenger stations were part of the system. In locating the tracks at the northern part of the city the river crossings of the deltas of the Ota River were reduced to a minimum number, being over the Kyobashi, the Ota, and the Yamate Rivers. Ujina, the only island with a harbor suffi- ciently deep to accommodate ocean-going vessels, was connected to the Hiroshima freight yards by a single-track line to facilitate the embarking of military personnel and materiel for continental Asia, The average number of passengers trans- ported per month in the Hiroshima district was 1,824,960, exclusive of military personnel. Through the war years the average tonnage in freight carried was 9,800 tons per month, requiring 620 freight cars, but a total of 6,000 cars a month was routed through the freight yards. c. Figures 6 and 7 indicate all the buildings within the limits of the Hiroshima railroad freight and passenger areas, including the roundhouses and passenger stations. This was the main sec- tion of the Hiroshima subdivision where major repairs to engines, freight and passenger cars were made. Minor repairs to electric cars were also made at Hiroshima, but major repairs were per- formed at the shops in Hatabe, northwest of Kyoto. Since all locomotives in this area were the coal-burning type, coal bunkers were necessary. 731508—47 12 171 The Hiroshima division maintained 3 fueling hunkers consisting of a 100-, a 120-, and a 150-ton bunker, respectively. The output of the 3 bunkers was 500 tons of coal per day. A 10-ton traveling crane was used for coaling operations. d. The printing office, passenger station, and roundhouse were surveyed by the Building Dam- age Section as Buildings 120, 121, and 126, respec- tively. All the other buildings were classified as wood-frame, commercial-industrial structures or light-frame, domestic structures. e. The largest locomotives in the Hiroshima area were those classed as D51 and U52 series which weighed 77 and 85 tons, respectively. The tender for each type was the same and weighed 44.7 tons loaded. 'The drawbar pull could not be obtained, but the maximum train consisted of 65 freight cars of various tonnages. The average train consisted of between 40 and 50 freight cars. The freight handled in the Hiroshima freight yards, as mentioned in Paragraph 26, required the use of 48 locomotives per day. This figure in- cluded through trains which were routed via H iro- shima. The following (Table 6) is a tabulation of passenger and freight car sizes in tons as given by the government railways office: Table 6.—Freight and 'passenger car sizes Type of car Net weight (tons) Capacity (tons) Passenger cars: Large 35. 64 49 64 Medium 34. GO 38. 00 Small _ 18. 81 22. 81 Freight cars: Large 27. 00 50. 00 Medium 6. 00 18 00 Small _ 4. 00 8. 00 /. All rolling stock was manufactured under the supervision of the government railways agency. The rate of repairs of all rolling stock at the Hiro- shima district was as follows: Table 7.—Repair data for rolling stock Type Rate of reapirs per month Locomotives, Types D51 and D52 13 13 40 Tenders for D51 and D52 - Passenger cars Freight cars 130 Table 8-XIII.— Hiroshima government railroad system buildings—building data KOI STATION Build- ing Grid Usage Type Plan area Stories Build- ing HE-V Build- ing Fire-V Dis- tance AZ (feet) Total floor area Building damage (floor area) Equipment damage Structural damage Damage Minor dam- age Per- cent Cause Blast Fire Mixed Blast Fire 4E 4E 4E 4E 4E 5 residences D D A2.3 A2.3 D 3.2 2.5 21.8 17.5 5.7 1 1 1 1 1 V-4 V-4 V-4 V-4 V-4 C C c 0 c 7.800 7.800 7.800 7.800 7.800 3.2 2.5 21.8 17.5 5.7 2.4 1.8 16.2 5.7 1.3 Quarters. Station.. . Transit shed ... Warehouse. [Areas in 1,000’s of square feet] YOKOGAWA STATION 3H 3H 3H 3H 3H 3H 7 residences- . D D A2.3 D D A2.2 4.5 5.8 21.3 8.5 2.2 5.7 V-4 V-4 V-4 V-4 V-4 C C C C C N 6, 300 6.300 6.300 6.300 6.300 6.300 4.5 5.8 21.3 8.5 2.2 5.7 4.5 5.8 21.3 8.5 2.2 Station! Transit shed ........... ' Warehouse.. ... . . . Garage. _ 1 5.7 These figures include the repairs of electric pas- senger cars which received only minor repairs at Hiroshima. Government officials estimated that approximately 60 locomotives, 91 passenger cars, 700 freight cars, and 16 electric railway cars were iii the Hiroshima vicinity at the time of the attack. g. The stations at Yokogawa and Koi (Fig. 5) which were also within Hiroshima constituted part of the Hiroshima railroad division. Yokogawa was the terminal point of the Kabe Electric Rail- 172 Way* 1 able 8 lists all buildings at the Koi and Yokogawa stations. The garage building at the vr on o 1 °kogawa station is identified as Building 75 in die Building Damage Section. The track system indicated in Figure 5 shows aU d'ack within the Hiroshima vicinity, including die classification yards. The Sanyo line, or main d*'e, was a double-track roadbed through the city, ciossing the Ota River delta on the north side of die city, while the roadbed to Ujina was single dack. The crossings of the branches of the Ota Kiver were as follows: the warehouses, repair shops, and engine sheds (Fig. 7) which were classified as wood-frame, commercial-industrial structures were damaged by blast (Photos 36 through 44). Roundhouse 1 re- ceived only minor damage (Photo 45). This area was between 8,000 and 10,000 feet from GZ. Be- cause of the disruption of power facilities at the Dambara substation from which the railroad elec- trical equipment was supplied, no electrical power was available. Bunkers, cranes, and pedestrian overcrossings were undamaged (Photos 46 and 47), but lack of electrical power prevented the coaling operations of the cranes. When electrical power was restored on 9 August 1945, coaling serv- ice was resumed, and repairs in the roundhouse were continued. b. Figures 6 and 7 show the locations of pas- senger and freight cars on the morning of 6 August 1945. At that time there were 91 passenger cars and 125 freight cars in the passenger station area, as shown on Figure 6, and 486 freight cars in the classification area, as shown on Figure 7. All damage to both passenger and freight cars in the passenger station area was caused by blast and by fire from adjacent burning buildings. The over- turned freight cars indicated on Figure (5 were the result of blast, but government railroad officials stated that no passenger cars were overturned. This was probably due to the protection that the passenger station (Building 121) offered, whereas the freight cars were in more open areas. This area is between 5,800 and 6,800 feet from GZ. No freight-car damage was sustained in the classifica- tion or repair area, according to yard officials, nor was there damage to locomotives. In reporting the damage to rolling stock the Government rail- ways officials employed terms and definitions other than those used in this report. The combinations of both are defined as follows: (1) Total: Not worth repairs. Completely burned. (2) Heavy: Requiring repair beyond capacity of normal maintenance staff, usually returned to manufacturer or repair section. (a) Partly burned. (b) Severely damaged, cannot be used without repairs by the repair section, (3) Slight : Requiring repair within capacity of normal maintenance staff. (a) Moderate damage, can be used temporarily but must be repaired by repair section for con- tinued service. Table 9.—Bridge crossings River Grid Bridge No. Bridge type Spans Length (feet) Remarks Enko 31 9 Plate girder... 7 489 Double traci Ota 3H 26 do 11 825 Do. Yamate 3G 50 do 10 390 Do. E>ry stream 30 51 do 2 66 Do. Enko 5J 2 do 10 450 Single track. abov e data are taken from the Bridge Damage Section. /• there was also a number of crossings over highways constructed of steel beams, approxi- mately 20 feet in length. The track bed between the Enko and the Yamate Rivers was built on a fid section averaging approximately 12 feet in height. Figure 5 shows the detail of the roadbed fid section, complete with ties, rails, and communi- cations system. The equivalent of a 100-pound- per-yard rail, manufactured by the Japan Rail h'0; was used. J- I here were 8,467 persons employed by the government railways at Hiroshima prior to 6 August 1945. 3- Analysis of Damage (l Th • mie government railways printing office and Passenger station indicated on Figure 6 were JS,(d as Buildings 120 and 121, respectively, by le Guiding Damage Section. All the remaining dings on Figure 6, being residences, offices, and gmgs, were classified as light-frame, domestic ’S 1 lu‘tures. This building area was between 5,800 am 7,4oo feet from (jand (]ie majority of the lU tu,'es was damaged by fire (Photos 33 through j Ue to the drop in pressure in water lines am lack of electricity for auxiliary pumps, little U),dd be done toward stemming the fires in the station area. Roundhouse 1, which is listed as nilding 126 by the Building Damage Section, and 173 PHOTO 33-XIII. Passenger station and shelter damaged by fire and blast, 6,300 feet from GZ. PHOTO 34 XIIf. Railroad printing building damaged by fire, 5,800 feet from GZ 174 PHOTO 35-XIII. General view of passenger station area showing bomb damage, 6,300 feet from GZ. 175 PHOTO 36-XIH. Roof stripped from transit sheds by blast. 8.500 feet from GZ. PHOTO 37 XIII. Transit sheds damaged by blast, 8,700 feet from GZ. 176 PHOTO 38-XJII. Superficial blast damage to transit sheds, 8,500 feet from GZ. PHOTO 39-XIII. Engine inspection building damaged by blast, 9,800 feet from GZ. 177 PHOTO 40-XIII. Warehouses damaged by blast, 9,500 feet from GZ. PHOTO 41-XIII. Office and warehouse damaged by blast, 9,100 feet from GZ. 178 PHOTO 42-XIII. Classification and repair area, 8,500 feet from GZ, showing general damage. 179 PHOTO 43-XIII. Classification area. Buildings damaged by blast, 9,600 feet from GZ. 180 PHOTO 44-XIII. Warehouses damaged by blast, 9,200 feet from GZ. PHOTO 45-XIII. Roundhouse, showing minor blast damage, 8,700 feet from GZ. 181 PHOTO 48-XIII. Undamaged coal bunkers and crane on south side of Roundhouse 1, 8,900 feet from GZ PHOTO 47-XIII. Undamaged pedestrian over-crossing south of passenger station, 6,900 feet from GZ. 182 PHOTO 48—XIII. Yokogawa station area showing fire damage 6,000 feet from GZ. 183 (5) Slight damage can be used; repairs made by train crew. All car damage is summaried as follows: overturned, or were off the tracks and tilted; also, of 7 cars derailed but upright, 1 was on the bridge and 6 off. The locomotive received only broken glass damage, but the rear trucks of the tender were derailed. None of the train crew was killed, but minor injuries were suffered by a few. The locomotive was disconnected immediately and run to the west abutment of Bridge 9. It was re- ported by the train crew to railroad officials and to members of the team that tire broke out im- mediately as a direct effect of the bomb in the first 5 cars behind the locomotive, which were still on the bridge, as well as the 23 cars on the fill section (Photos 49 and 50). The only evidence of fire damage to the bridge consisted of slight irregular charring of a few wooden ties. Table 11 relates to the damaged cars and contents, as told by govern- ment railroad officials. It is supplemented by Figure 8. e. It is felt, after examination of all circurn- ■■0 7 stances, that no fires could have been started within the cars or to the cars themselves from radiant heat of the atomic bomb, primarily because the distance to the train was in excess of 5,800 feet from GZ. The temperature was not high enough nor of sufficient duration to ignite the cars or the contents. The medical supplies in cars 45 through 49 could have combined into many different in- flammable mixtures as a result of blast damage. The remaining burned cars were in an area with fires on both sides of the fill. It was therefore evi- dent that those cars were ignited by the fires in the area. The total number of cars—passenger, freight, and electric—damaged at Koi, Yokogawa, and at Bridge 9 is shown in Table 11. Table 10.*—Passenger and freight or damage Damage by burning Damage by blast Typo of ear Total (totally burned) Heavy (partly burned) Heavy (severe) Moder- ate ‘Slight Passenger cars; Steel 4 8 12 20 W ood 2 15 2 20 Freight cars: Steel 5 8 Wood 4 17 2 ‘Japanese classification. c. All buildings in the Koi station area, 7,800 feet from GZ, received superficial damage. With the exception of the garage (Building 75 of the Building Damage Section), all buildings within the Yokogawa area (Photo 48), 6,000 feet from GZ, were destroyed by fire. Information was not available from the government railroad officials regarding the collapse of structures by blast prior to the burning. Damage to buildings in the Koi and Yokogawa station area is shown on Table 8. d. At the time of the attack, train 377 was pro- ceeding toward Bridge 9 over the Enko Kiver. The train was made up of 49 miscellaneous freight cars and a locomotive of the D51 type. When the locomotive had crossed 300 feet of the 490-foot bridge the blast wave reached the train. Of the 49 cars, 10 on and 24 off the bridge were completely 184 PHOTO 49-XIII. Looking east at damaged freight cars on east end of Bridge 9, 5,800 feet from GZ. PHOTO 50-XIII. Looking west at damaged freigiit cars on east end of Bridge 9, 5,800 feet from GZ. 185 Table 11.— Damage to Train 377 [0815 hours, 6 Aug. 1945 on Bridge 9] No. of car Type and No. Station from— Station to— Type of goods Weight (tons) Damage to car Damage to goods Disposition of car No damage No damage Towed into station. 2 Totally burned. Totally burned do do do do do do do do do do Towed into station. do do do Do. Wamu 7527.. do do Do. do Do. 18 Severe damage. .. Left in place. 18 Do. Towed into station. Totally burned. Totally burned. rio do do do do rlo do do _._.do 17 Chiki 3625._. Anjikawaguchi Nishi-Hachihan... Machinery 40 No damage No damage Towed into station. 18 Chiki 1167.. Najikawaguchi . do ....do do do Totally burned Totally burned. Left in place. Wa 231 Moji Cement.. _ Moderate damage No damage Towed into station. Totally burned Totally burned.. Left in place1. Severe damage Burned. .-- Snmn 5314S do Totally burned. Totally burned. . do do .... do do do Do. Oita do do do .. do do do Totally burned— Do. No damage No damage Do. do do Do. T _ „„ Medical supplies. do Do. ma. Flour 17 No damage.. do Towed into station. Ifi ..do Do. Torpedoes 18 Slight damage do Do. Ifi .do do Do. 16 do Do. do Do. do do do Do. Aircraft parts 15 Do. 17 do do --- Left in place. do 17 do Do. 4.5 do Totally burned Totally burned 4fi do Hn do do do 47 ...do ’ do 48 __ do do 49 ..do do do SUMMARY Type of car Totally burned Partly burned Serious damage Moderate damage Slight damage No damage Total Steel 10 3 1 4 4 22 18 2 5 2 27 186 ILLUSTRATION SHOWING THE DERAILING OF FREIGHT TRAIN 377 BY THE ATOMIC BOMB SECRET LEGEND TURNED COMPLETELY OVER OR LEANING BURNED DERAILED DERAILED AND BURNED SECRET U S. STRATEGIC BOMBING SURVEY PER AILING OF FREIGHT TRAIN 377 HIROSHIMA , JAPAN FIGURE 8 Xm 731568 0 - 47 (Face p. 186) ♦Table 12.—Damage to rolling stock in Hiroshima vicinity Station Type of car Damage by burning Damage by blast Total (totally burned) Heavy (partly burned) Heavy (severe) Moderate Slight Koi . Passenger car: Steel Yokogawa Wood. _ . __ Freight cars: Steel . . Wood .. 1 Passenger car: Steel . Bridge 9 Wood Freight car: Steel . Wood 1 6 7 1 1 1 1 2 Electric cars: Steel . Wood. 2 2 Passenger cars: Steel Total Wood Freight cars: Steel . . _ 10 18 3 1 1 4 5 Wood 1 Passenger cars; Steel W ood Freight cars: Steel 10 19 6 3 2 1 2 1 1 4 7 Wood _ _ 8 Electric cars: Steel Wood 2 2 Japanese classification. As noted in Table 12, car damage at the Koi sta- tion, 7,800 feet from GZ, was negligible. The \ okogawa station, however, being 6,000 feet from GZ and in a fire area, received both blast and fire damage. /• In summarizing the total car damage in Hiro- shima and vicinity, table 13 shows the percentage of damage to rolling stock. g. In reviewing the damage to the rolling stock by blast, since fires to rolling stock were generally ignited by adjacent burning buildings, a maxi- mum limit of probable damage can be determined. The cars in the classification area within Hiro- shima between 8,000 and 10,000 feet from GZ re- ceived no damage, but about 50 percent of those in the station area between 5,800 and 6,800 feet from GZ received from heavy to slight damage. In this area some empty cars were overturned. In the Yokogawa station area, 6,000 feet from GZ. the circumstances were the same but no cars were overturned. However, at Bridge 9, which was 5,800 feet from GZ, 41 loaded cars were actually derailed and 15 of the 49 cars were damaged by blast. No information regarding blast damage to the burned cars was received from railroad offi- cials. In the Koi station area, 7,800 feet from GZ, the damage to cars was negligible. From this it can be concluded that the probable maximum limit 1 able 13.—Percentage of damage to rolling slock Type of car On hand Damaged Percentage Passenger _ 91 83 92. 9 Freight . _ 700 91 13. 0 Electric 16 12 75. 0 It is readily seen that passenger and electric cars cars were the more vulnerable, probably because of their construction. 731568—47 13 187 of damage for freight cars was approximately 6,800 feet from GZ. This conclusion was based on the low percentage of freight cars damaged, the majority of which were within the 6,800-foot radius. Since passenger cars and electric cars were damaged in a ratio of 93 percent at 6,800 feet and 75 percent at 6,000 feet from GZ, respectively, it can be concluded that the maximum damage limit for these types extends beyond 6,800 feet from GZ. No cars of these types were found beyond that point. h. There was no damage to the track system or bridges (Photos 51 through 53). The paint on the steel girders of the bridges facing the blast, how- ever, was discolored. All tracks of the Sanyo main line were cleared at 1500 hours on 8 August 1945 and traffic was resumed. Between 6 to 8 August 1945 passengers routed through Hiroshima were compelled to walk between Hiroshima and Koi stations in order to make train connections. Sig- nal systems were inoperative due to damage to the communications office. i. Traffic dropped off sharply following the at- tack. Freight tonnage fell from 9,300 tons per month to 5,400 tons per month, requiring only 360 cars. Repairs to rolling stock varied; repairs to locomotives remained at 13 per month; freight cars dropped to 60; while passenger-car repairs were increased to 48 per month. Loss of freight traffic rendered freight-car repair less important. j. The total cost of damage as estimated by the Government railroad agency on 15 November 1945 was 15,800,000 yen or $3,950,000 at the 4-yen-per- dollar rate of exchange. k. Of the 8,467 persons employed, 198 were killed, 140 were missing, 934 seriously injured, and 1,195 sustained minor injuries. No information could be obtained for passengers killed or injured during the attack. 4. Comments and Conclusions a. The damage to the railroad system in Hiro- shima as a result of the attack was sufficient to dis- continue the services of the system for a short time. The buildings in the station area (Fig. 6) were put out of service entirely by blast and lire, but the buildings in the classification area (Fig. 7) were not damaged sufficiently to disrupt operations. Damage to the electrical substation supplying power caused the disruption, but this condition lasted only until 9 August 1945, The buildings in the station area were, for the most part, of wood construction and compressed into a small area. The fire which eventually reached this area dam- ped all the buildings, but did not damage nearby buildings in the classification area because of the intervening tracks. A fire, started in, or near, this area would have damaged all the buildings more seriously, and railroad service in or through Hiro- shima would have been impaired for a longer period of time. It is concluded that dispersal of buildings for necessary repair and storage would be effective protection against an attack of this type. Smaller, complete repair units, independent of each other, would, if dispersed, insure repairs in case of damage to one of the units. h. Freight cars, with a probable limit of damage at 6,800 feet from GZ, in this instance had a lower rate of vulnerability than passenger cars which had a greater probable limit of damage as shown by the percentage rates in Table 13. Since the trackage system was on the surface there was no effective protection for rolling stock against the attack. c. The communication office was damaged by fire sufficiently to halt its operation, but the signal towers, being well dispersed, received only super- ficial blast damage. Since the efficient routing and the safety of trains were entirely dependent on these systems, it was obvious that consideration should have been given to their protection. The benefit of dispersal for protection against fire, as shown in Paragraph 4a, has been proved by the lack of fire in the signal towers. C. ELECTRIC GENERATING AND DISTRIBU- TION SYSTEM 1. Summary a. Cost of Electricity. The Chugoku Electric Co,, which supplied the city of Hiroshima with power and light, purchased all its electrical energy from the Nippon Electric Co. at 2.50 sen per kilowatt-hour. The Chugoku Electric Co, in turn sold it to the consumers at 11 sen per kilowatt- hour for lighting, 6 sen per kilowatt-hour for heating, and 4 sen per kilowatt-hour for motor energy. The total consumption per day was 80,000 kilowatt-hours for lighting and 170,000 kilowatt-hours for heating and motor energy. I). Capacity of System. The Nippon Electric Co. maintained and operated six hydroelectric plants (Table 14) which had a total capacity of 94,200 kilovolt-amperes and one steam-electric plant of 90,000 kilovolt-amperes. These high- tension systems were united at the Hiroshima sub- 188 PHOTO 51-XIII. Bridge 9. Typical, double-track, railroad bridge, 5,800 feet from GZ. PHOTO 52-XIII. Typical railroad crossing over road, Bridge 8A, 5,600 feet from GZ. 189 PHOTO 53-XIII. Bridge 2. Typical, single-track, railroad bridge, 8,500 feet from OZ. PHOTO 54-XIII. Type D51 series locomotive. 190 station, rated at 108,000 kilovolt-amperes (Table ), transmitted power to the Hiroshima Harbor substation (rated at 12,000 kilovolt-amperes) on the west side of Hiroshima, and distributed the electrical energy through 7 substations in Hiro- shima having a total capacity of 34,800 kilovolt- amperes (Table 17). The city of Hiroshima was on> a part of the area served by the Nippon Elec- ric °* The Chugoku Electric Co. also operated a steani-electric plant rated at 3,500 kilovolt-am- ju‘res to augment the Sendamachi substation. All hy droelectric and steam-generating plants, as well as all substations, are located on Figure 9. c. Equipment. The generating and transform- lng equipment of both electrical companies was Manufactured by the Nippon Electric Co. The design of all generating and transforming equip- ment originated with the Westinghouse Electric and the General Electric Co. of the United States. Design data were modified by the Japa- nese to suit their requirements. (1. Buildings. The office building and substa- *lon buildings are classified in Table 15. Build- Ulgs included in the building damage section are shown in Table 16. e% and 110-Kilovolt Transmission System. 1 he Nippon Electric Co. transmitted all electric power from the hydroelectric plants to the sub- nations at 110 kilovolts. Power transmission t' oin the Saka steam plant was maintained at 55 yiovohs; this plant was approximately 4.5 miles t*om the substation, Both the 55- and 110-kilo- high-tension lines were overhead systems. t'ey are located on Figure 9. „ K and 23-Kilovolt Distribution System. U‘ substations of the Chugoku Electric Co. trans- ‘uinecl 22 kilovolts down to 3.3 kilovolts for con- £lmer distribution. The Toyo Industries, Japan °undry, Hiroshima Electric Railway Co., and Mitsubishi Shipyard and Heavy Industries, Hvever, having their own substations, received P°Wer at 22 kilovolts and transformed it to re- ffined voltages. Both overhead and subsurface systems for the 22-kilovolt distribution were em- e<*- I he overhead consisted of approximately foot of 3-phase system. The subsurface ■onsisted of 95,000 feet of 3-phase system with ,.° e illounted transformers for feeder distribu- >n- Locations of the 22- and 3.3-kilovolt sys- eills !U'e shown on Figures 9 and 10. g. Damage to Equipment. The equipment in 1 le substations of the Nippon Electric Co. was undamaged, being 15,000 and 14,300 feet from GZ. Of the 7 substations of the Chugoku Electric Co,, the Sendamachi substation and steam-electric plant at 7,700 feet from GZ were heavily damaged by fires which spread to the area. The Otamachi substation, 2,400 feet from GZ. was heavily dam- aged by blast and fires started by the short-cir- cuited equipment. The Dombara, Misasa, and Eba substations were only slightly damaged at distances from GZ of 5,500 feet and beyond. The damage to the Sendamachi substation would have been greatly reduced by adequate fire protection. The remaining 2 substations were undamaged. Table 18 summarizes the damage. h. Damage to Buildings. Damage to the build- ings of the Nippon Electric Co. and the Chugoku Electric Co. is classified in Table 15. The build- ings in Table 15 are classified in the building damage section. Any conclusions therein drawn for the mean areas of effectiveness for buildings will also apply to this section. i. Damage to 55- and 110-Kilovolt Transmission Systems. The overhead 55- and 110-kilovolt trans- mission systems were undamaged. j. Damage to 3.3- and 23-Kilovolt Distribution Systems. Approximately 70 percent of the 3.3- kilovolt overhead and feeder distribution system was damaged by blast and fire. Of the 7,000 poles utilized, 4,000 wood poles and 27 steel-lattice poles were damaged by blast and fire. No concrete poles were damaged. Overhead wires were blown down by blast 8,000 feet from GZ. (Table 19 gives the limit of damage to the poles.) Of the remaining undamaged 30 percent of the distribution system, only 90 percent was usable because some areas be- yond the points of damage could not be serviced with electricity due to lack of connections to sub- stations, The damage to the substations of Ote- machi and Sendamachi made them inoperative and the areas they serviced were distributed among the other substations. There was no damage to the 22-kilovolt subsurface system. k. Consumption of Po wer. By the end of Sep- tember when the available 5 substations had be- come operative, 40,000 kilowatt-hours per day were used for lighting and 10,000 kilowatts per day for motors and heating. This was an 80-percent over- all reduction in the use of electricity. l. Cost of Damages. The estimated cost of damages to the Chugoku Electric Co. was 10,000,- 000 yen, or $2,500,000, at the 4-yen-per-dollar rate of exchange. 191 m. Personnel Casualties. Of the 600 persons employed by the company, 100 were killed, 100 were injured, and 50 were missing. 2. The System a. The Chugoku Electric Co. supplied all elec- trical power to the city of Hiroshima. Although a subsidiary of the Nippon Electric Co., it con- ducted all business as a separate agency, purchas- ing its electrical energy from the controlling com- pany. The purchase price of power from the Nip- pon Electric Co. was 2.50 sen per kilowatt-hour. b. In order to establish basic rates for the con- sumption of electric power, separate classifications were established based upon types of appliances (lamps, heaters, and motors) and the scale of rates was established in proportion to the amount of energy used. The cost of energy to residents and industry for each classification was 11 sen per kilowatt-hour for lamps, six for heaters, and four for motors. The average daily consumption of electrical energy was 80,000 kilowatt-hours for lighting, and 170,000 kilowatt-hours for heaters and motors, c. As shown on Figure 9, the Nippon Electric Co. maintained six high-voltage, hydroelectric gen- erating units and one steam-electric generating plant. Capacities for each unit and the total for all units were as follows: Table 14.—Generating units Capacity (kilovolt- Hydroelect ric; amperes) Uchinashi 24. 750 I>oi 10,000 Shimoyama _ 18,750 Kake 15,700 Kumami 13,750 Manohira 11,250 Total 94, 200 Steam-Electric: Saka steam plant 90, 000 Grand total capacity 184, 200 The hydroelectric units and the steam-electric unit generated power at approximately 12,000 volts. Because of the distances involved, voltages from the hydroelectric units were transformed up to 110 kilovolts for transmission, while the voltage from the Saka steam plant which was approxi- mately 4.5 miles from the Hiroshima substation was transformed up to 55 kilovolts. The 3-phase delta connections was used in all systems. The H iroshima substation of the Nippon Electric Co., which was the distribution point for all generat- Table 15-XIII.—Hiroshima electric distribution system—building data NIPPON ELECTRIC COMPANY BUILDINGS [Areas in thousands of square feet] = Building 05 £ o § Grid a 0 Substation _ Usage CO > H N CO Type 7.5 2.5 Plan area to CO Stories c < Building HR-V i O to 1 Build ins; flre-V 1 15,100 14,400 District AZ (feet) 17.5 2.5 Total floor area Blast Structural damage Building damage (floor area) Fire Mixed Blast 0Q o-c i a 85 05 TQ O ® 5] Fire w TQ O* Minor damage Percent Equipment damage Cause 5J S(AZ.3) 1.3 1 V4 C 8,200 1.3 Slight 3 11 9,200 5H E-2.. 3 V3 N 3, 100 4.1 4.1 50 fire. 3F S(AZ.3) 1.6 1 V4 C 5,900 1.6 Moderate... 10 7H 8,000 5 fire. Turbine building _ _ AZ.3. 3.8 1 V4 C 8,000 7.6 3.8 80 Fire. Boiler building AZ.3. 5.0 V4 c 8,000 5.0 5.0 20 Do. Namba 9H Substation.. ______ E-l. _ 0.8 2 V4 c 11,700 1.6 Slight 8E do D 0.4 ] V4 c 12, 000 0.4 0.2 ... _do 2 5H Office _. .. E-l 4 VI R 2,300 20.4 1.6 2.1 CHUGOKU ELECTRIC COMPANY BUILDINGS 192 UCHINASHI HYD. POWER STATION HIGH HEAD CAR 24,750 KVA SHIMOYAMA HYD. POWER STATION HIROSHIMA ELECTRICAL GENERATING AND DISTRIBUTION SYSTEM no kv no kv HIGH HEAD CAR 18,750 KVA DOI HYD. POWER STATION HIGH HEAD CAR 10.000 KVA KAKE HYD. POWER STATION no kv HIGH HEAD CAP. 15,700 KVA HIGH HEAD CAP. 13,750 KVA KUMAMI HYD. POWER STATION LEGEND OVERHEAD WIRES UNDERGROUND WIRES TSUTSUGA SWITCHING STATION no kv CAP. 90,000 KVA HIGH HEAD CAR 11,250 KVA SAKA STEAM PLANT MANOHIRA HYD. POWER STATION HIROSHIMA HIROSHIMA PREFECTURE, HONSHU, JAPAN CONTOUR INTERVAL 20 METER* ORIO SYSTEM BASED ON 1000 YARD WORLD POLYCONIC GRID SECRET US. STRATEGIC BOMBING SURVEY ELEC. GEN. 8 DIST. SYSTEM HIROSHIMA, JAPAN FIGURE 9-Xm 731568 0 - 47 (Face p. 192) No. 1 HIROSHIMA HIGH TENSION ELECTRICAL DISTRIBUTION SYSTEM LEGEND RESTORED LINE REPAIRED LINE DAMAGED LINE SUBMARINE OR UNDERGROUND DAMAGE RADII LIMIT OF BLAST DAMAGE TO OVERHEAD WIRES (8000') LIMIT OF FIRE DAMAGE TO TYPE I POLES (7000') LIMIT OF BLAST DAMAGE TO TYPE 3 POLES (6000') LIMIT OF BLAST DAMAGE TO TYPE I POLES (4500') 3 PHASE - 200 AMP CABLE TYPICAL SUBSURFACE CABLE CABLE ALL LINES 3,300 V. EXCEPT AS NOTED. 1 SUIGENCHI SUBSTATION 2 MISASA SUBSTATION 3 OTEMACHI SUBSTATION 4 DAMBARA SUBSTATION 5 SENDAMACHI SUBSTATION 6 EBA SUBSTATION 7 NAMBU SUBSTATION 8 YAGURASHITA RAILWAY SUBSTATION 9 MITSUBISHI MACHINE CO. 10 MITSUBISHI HEAVY INDUSTRIES 11 SENDAMACHI RAILWAY SUBSTATION 12 TOYO INDUSTRIES a JAPAN FOUNDRY HIROSHIMA HIROSHIMA PREFECTURE, HONSHU, JAPAN CONTOUR INTERVAL 20 METERS GRID SYSTEM BASED ON 1000 YARD WORLD POLYCONIC GRID SECRET U.S. STRATEGIC BOMBING SURVEY HIGH TENSION ELECT. SYSTEM HIROSHIMA, JAPAN FIGURE 10 -Xm 731568 0 - 47 (Face p. 192) No. 2 ing units, had a capacity of 108,000 kilovolt- amperes and transformed down to 22 kilovolts for use by the Chugoku Electric Co. The 12,000- kilovolt-ampere substation at Hiroshima harbor was also owned and maintained by the Nippon Electric Co. The location of the generating units and transmission lines are shown on Figure 9. Hiroshima and its vicinity, as serviced by the Chugoku Electric Co., was only a part of the area supplied by the Nippon Electric Co. holdings. d. The Nippon Electric Co. used the Westing- house Co. and General Electric Co. type for its generating and transforming equipment with modifications to suit Japanese requirements. All equipment, however, was manufactured by the Nippon Electric Co. e. The Chugoku Electric Co. received all its elec- trical energy at 22 kilovolts and transformed it to operating voltages by means of the 7 substations. The Toyo Industries, the Hiroshima Electric Kail- way Co., the Japan Foundry, the Mitsubishi Heavy Industries, Mitsubishi Shipbuilding Co., and the Mitsubishi Machinery Co., however, received power at 22 kilovolts and transformed it down to the voltages required. There were also approxi- mately 200 small industries which received elec- trical power at 3.3 kilovolts. Office buildings and dwellings, of which there were approximately 90,000, were supplied at usable voltages. f. The substation buildings of the Nippon Elec- tric Company and the Chugoku Electric Co. are classified on Table 15. Although buildings were used primarily to protect instruments, the Nambu substation buildings was also used to house the transformers. Transformers for the remaining substation were placed in open areas adjacent to the buiIdings. Since the Suigenchi substation was without a building it utilized Building 6 of the water-supply system for the protection of instru- ments. The following buildings will also be found in the Buildings Damage Section. Table 17.—Substation capacities NIPPON ELECTRIC CO. SUBSTATIONS (TOTAL 2) Substation Grid Capac- ity (kva) High side Voltage Low side Hiroshima 5M 108,000 110, 000 55, 000 no, ooo 22, 000 22, 000 22, 000 Hiroshima Ko 6C 12, 000 CHUGOKU ELECTRIC COMPANY SUBSTATIONS (TOTAL 7) Dambara 5J 11 5H 3F 7H 9H 8E 6, 000 1, 800 6, 000 6, 000 3, 000 6, 000 6, 000 22, 000 22, 000 22, 000 22, 000 22, 000 22, 000 22, 000 3, 300 3, 300 3, 300 3, 300 3, 300 3, 300 3, 300 Suigenchi Otemachi Misasa Sendamachi Nambu Eba . Total . _ 34, 800 According to the electric company engineers, each substation was designed at 6,000 kilovolt-amperes to serve the equivalent area of a 9,800-foot radius. With the exception of the substations at Suigenchi and Sendamachi, all substations were rated at this capacity. Due to the different densities of popu- lation and industry, the areas were changed to fit the demands. The Suigenchi substation was in- stalled primarily to serve the city water supply at Ushida, and, being in a sparsely settled area, 1,800 kilovolt-amperes were considered a sufficient capacity. The Sendamachi substation had in ad- dition to the transformer equipment a steam-elec- tric plant rated at 3,500 kilovolt-amperes. Thus the 3,000 kilovolt-amperes of the transformer substation and the 3,500 kilovolt-amperes of the steam-electric plant were combined to establish the required capacity of that area. The trans- formers and allied equipment, as well as the equip- ment in the steam-electric Sendamachi substation, were designed, manufactured, and installed by the Nippon Electric Co. Figure 10 shows the location of the 22-kilovolt and 3.3-kilovolt, high-tension lines supplying the city of Hiroshima. h. The transmission system of electric power was divided into two classes: (1) The overhead system, and (2) the subsurface system. The former, consisting of approximtely 95,000 feet of 3-phase, 22-kilovolt overhead, was placed around the outer rim of the city because of the danger Table 16. — Buildings classified by Building Damage Section Building damage Building; section building Dambara substation .... 117 Otemachi substation 1(5 Sendamachi substation 131A and 131B Chugoku Electric Co. office 216 g. Table 17 indicates the capacities and voltages of the substations of the Nippon Electric Co. and the Chugoku Electric Co. 193 SECRET POLES FOR ELECTRIC DISTRIBUTION SYSTEM TYPE I TYPE 5 SECRET U.S. STRATEGIC BOMBING SURVEY TYPE 3 ELECTRIC DISTRIBUTION POLES HIROSHIMA, JAPAN FIGURE ll-Xm SECRET HIROSHIMA ELECTRICAL GENERATING AND DISTRIBUTION SYSTEM NOTE ALL SIDES AND SLAB 4 CM REINFORCED CONCRETE . SECRET U S STRATEGIC BOMBING SURVEY ELECTRICAL SYSTEM-DUCTS HIROSHIMA, JAPAN figure 12 xnr 195 connected with a high-tension line of this type. The towers for the 22-kilovolt line were approxi- mately 110 feet high and designed to withstand an overturning moment of 3,000,000 foot pounds. Spacing of the towers wras approximately 650 feet. The 3.3-kilovolt system within the city, with all leads to subscribers, required 6,400 Type 1 wood poles, 30 Type 3 steel-lattice poles, and 30 Type 5 concrete poles to complete the system. All poles (Fig. 11) within the city carrying 3.3-kilovolt lines were spaced at 150-foot intervals. All Chugoku Electric Co. substations were interconnected by 3.3- kilovolt lines. Approximately 600 pole-mounted transformers stepped down the voltages for feeder distribution. i. The subsurface system consisted of 95,000 feet of 200-ampere, 3-phase, lead-sheathed cable. All subsurface cable, including subriver crossings, was laid in reinforced-concrete ducts (Fig. 12), buried 4.5 feet below ground elevation. j. Attempts to protect transformers from bomb- ing attacks were made by the Japanese at some sub- stations. Earth-filled wood forms varying from 2 to 4 feet in width were erected around the trans- formers as protection against fragments. k. The Chugoku Electric Company employed 600 persons for maintenance and operations. 3. Analysis of the Damage a. The Hiroshima substation (Photos 55, 56, and 57), 15,000 feet from GZ, was undamaged by blast as a direct effect, but the tremendous overload created by the short-circuited damaged electrical equipment in the city of Hiroshima tripped the cir- cuit breakers in this substation and immediately interrupted all electrical service in the Hiroshima area. Officials stated no damage occurred to the equipment and no flash-over was noted. The Hiro- shima harbor substation equipment (Photo 58) was undamaged at 14,300 feet from GZ. After in- vestigations by engineers the main substation was in operation the day after the attack, while the Hiroshima harbor substation, although undam- aged, was not in operation until 26 August 1945. This delay was due to the difficulty of making in- spection in the area in which the 110-kilovolt transmission lines were located. h. The building of the Hiroshima substation (Photo 57) received only minor damage, while the Hiroshima harbor substation building was undam- aged. Table 15 gives the damage classification of the Nippon Electric Co. buildings. c. The equipment in the substations of the Chu- goku Electric Co. at Suigenchi (Photo 59), 9,000 feet from GZ. and at Lambu (Photos 60 and 61), 11,500 feet from GZ, was undamaged by blast or fire. There was no evidence of heavy surges or overloading in these substations, although elec- trical equipment was damaged in the areas which they supplied. These stations were inoperative due to the power supply cut-off, but were again in service on 9 August 1945. The equipment in the Eba substation (Photos 62 and 63) the Misasa substation (Photos 64 and 65) and the Dambara substation (Photo 66), at 11,800, 5,500, and 7,900 feet, respectively, from GZ, received only slight equipment damage. Two relays in the Eba sub- station and 4 relays in the Dambara substation were damaged by falling debris and overloading of the circuits. The switchboard, including in- struments, wiring, and other panel equipment in the M isasa substation, was damaged by blast and debris. The two relays in the Eba substation were replaced on 11 August 1945, but the station was not in operation until 20 August 1945 because no power was being transmitted from the Hiroshima Harbor substation until that time. The four re- lays in the Dambara substation were not replaced until September 1945, but the circuits were re- wired to shunt out the relays, and the substation was in operation on 9 August 1945. Because of the difficulty of access to the Misasa substation, temporary repairs to enable the substation to oper- ate were not completed until 8 September 1945. The substations at Otemachi (Photos 67 and 68) and Sendamachi ( Photos 69, 70, and 71) were suffi- ciently damaged at 2,400 and 7,700 feet, respec- tively, from GZ to put them out of service for an indefinite period. The equipment at the Otemachi substation (Photo 68) was dislodged by the effects of the blast and was further damaged by fire caused by short circuits in the equipment. The substation at Sendamachi was heavily damaged by fires originating in the areas adjacent to the sub- station. Generator coils were burned out and the switchboard totally damaged (Photo 69). Tur- bine and generator bearings were also damaged. Some distortion to shafting and turbine blades was indicated. Boiler-room damage (Photo 71) was confined to distortion of pipes and metal, but small motors and pumps for collateral equipment were heavily damaged. The transformers (Photo 70) were not damaged, but busbars and insulators re- ceived slight damage and all leads to the trans- forming equipment were totally damaged by blast 196 PHOTO 55-XIII. Undamaged Hiroshima transformer substation of Nippon Electric Co., 15,000 feet from GZ. PHOTO 56-XIII. Undamaged Hiroshima transformer substation of Nippon Electric Co., 15,000 feet from'GZ. 197 PH0T057- XIII. Minor damage to office building. Hiroshima transformer substation of Nippon Electric Co., 15,000 feet from GZ. PHOTO 58-XI1I. Undamaged Hiroshima Harbor substation of Nippon Electric Co., 14,300 feet from GZ. 198 PHOTO 59-XIII. Undamaged Suigenchi substation. Note transformer protection, 9,000 feet from GZ. PHOTO 60-XIII. Undamaged exterior of Nambu substation, 11,500 feet from GZ. PHOTO 61-XTII. Undamaged interior of Nambu substation. 199 PHOTO 62-XIII. Eba substation. Building damaged by blast, 11,800 feet from GZ. PHOTO 63-XIII. Panel of Eba substation. PHOTO 64-XIII. Blast damage to Misasa substation, 5,500 feet from GZ. 200 PHOTO 65-XIII. Undamaged busbars and transformers at Misasa substation, 5,500 feet from GZ. PHOTO 66-XIII. Dambara substation showing undamaged busbars and transformers, 7,900 feet from GZ. 201 PHOTO 67-XIII. Blast and fire damage to Otemachi substation, 2,000 feet from GZ. 202 PHOTO 68-XIII. Equipment damage to Otemachi substation, 2,400 feet from GZ. PHOTO 69-XIII. Turbine and switchboard damage at the Sendamachi substation, 7,700 feet from GZ. 731568—47 14 203 PHOTO 70-XIII. Damage to exterior equipment at Sendamachi substation. Busbars being repaired. Note that out-going lines are down. PHOTO 71-XIII. Sendamachi substation boiler room damage. Boiler steel warped by heat and collateral equipment damaged by fire. 204 and fire. Table 18 is a recapitulation of damage to equipment in all substations owned by the Chu- goku Electric Co. and fire. (Note.—In the following pages, photos with an asterisk (*) will be found in Part A, and those marked with a number sign (#) will be found in Part C of Sec. XIII.) Of the (1,400 wood poles (Type 1), 500 were broken by blast (Photos *16, 76, 77, 78, 79, 80, 81, 82, and 84), and 3,500 were burned (Photos 82, 85, 87, and 88). Of the 30 steel-lattice poles (Type 3) 6,000 feet from GZ, 27 were damaged by blast (Photos *17, *19, *22, 76, and 77), having been bent at the base. No con- crete poles (Photo *23) were damaged, the nearest concrete pole being 6,000 feet from GZ. Overhead transmission wires were found parted and down 8,000 feet from GZ as a result of blast (Photos *86 and *88). The limits of damage to the types of poles of the Chugoku Electric Co. are shown on Table 19. Table 18.—Substation equipment damage Substation Grid Distance from GZ (feet) Damage type Cause Dambara 5J 7,900 Slight Debris and overload. Suigenchi 11 9, (XK) None.-. .. Otemachi 5H 2,400 Heavy Blast and fire. Misasa 3F 5,500 Sendamachi 1 urbo-Qenerators 7H 7,700 Heavy Fire. Boilers 7H 7, 700 Do. Transformers 7H 7, 700 ___do Blast and fire. Nambu 9H 11,500 Eba 8E 11,800 Debris and overload. — The engineers of the Chugokn Electric Co. were unable to give the approximate date when the Ote- machi or Sendamachi substation would be repaired and resume operations. Although the damage to the tranformers and collateral equipment at the Sendamachi substation was slight, little or no effort was expended in placing the system in operation. d- Of the 7 substations and one office building of the Chugokn Electric Co., the office building (Photo 72) alone received structural damage by blast. The Eba (Photo 62), the Otemachi (Photo ()7), Misasa (Photo 64), and Nambu (Photo 60) substations were damaged to a minor degree only. Oie Suigenchi substation (Photo 59) had no at- tached building but depended on Building 6 of the Purification plant (Part E of this section) for housing its recording equipment. Damage classi- fication of all substation buildings is given in Fable 15. e• 1 lie substat ions of the Toyo Industries, Japan Foundry, and the Mitsubishi Shipyards and In- dustries were undamaged, being at distances greater than 15,000 feet from GZ. The damage to the substations of Hiroshima Electric Railway Co., nc-, wiU be found in Part A of this section. /• I he 110-kilovolt, high-tension lines of the Tpou Elect ric Co. were undamaged, the nearest point of these lines being 11,000 feet from GZ. nere Was neither blast nor fire damage to the 22-kilovolt overhead transmission lines (Photo 73) of the Chugokn Electric Co., although the 22-kilo- volt overhead lines which supplied the Misasa sub- station (Photo 74) were only 5,700 feet from GZ. Approximately 70 percent of the 3.3-kilovolt over- transmission lines and feeders, including pole-mounted transformers, was damaged by blast Table 19.—Pole damage limit Pole type Damage Material Blast (feet) Burned (feet) Tilted (feet) 1 Wood . 4, 500 6, 000 7, 000 7, 500 3 Steel lattice 5 Concrete g. Of the TO percent of the 3.3-kilovolt overhead lines and feeders damaged, it was estimated that 10 percent could be salvaged for reuse with the exception of the pole-mounted transformers (Photo 75), which were totally damaged, requiring 100 percent replacement. The remaining 30 per- cent of the overhead was only 90 percent operative because the overhead transmission beyond the points of damage could not be supplied with elec- tricity due to the heavy damage in the Otemachi and Sendamachi substations. The 3.3-kilovolt lines in these areas which were undamaged were divided among the adjacent substations, and sup- plied with power by shunting around the Otemachi and Sendamachi substations and interconnecting with the other available substations. Figure 10 shows the extent of damage and replacement of overhead. h. The subsurface 22-kilovolt transmission sys- tem was undamaged and consequently power could be supplied immediately to the substations which were operative. The 22-kilovolt subsurface lines supplying undamaged facilities from the damaged substations were shunted around those substations and supplied by others. 205 PHOTO 72-XIII. Blast damage to the office of the Chugoku Electric Co. (Bldg. 26), 2,300 feet from GZ. PHOTO 73-XIII. Conversion from overhead transmission system to subsurface system. Undamaged at 9,500 feet from GZ. 206 PHOTO 74-XIII. High tension tower, 6,500 feet from GZ, undamaged. PHOTO 75-XIII. Pole-mounted transformer damaged by fire, 200 feet from GZ. PHOTO 76-XIII. Steel lattice and wood pole 2,000 feet from GZ. 207 PHOTO 77-XIII. Steel lattice and wood pole 2,000 feet from GZ. Framing members of Bridge 30A also damaged at this distance. PHOTO 78-XIII. Wood poles 3,000 feet from GZ. PHOTO 79-XIII. Wood poles 3,000 feet from GZ. 208 PHOTO 80-XIII. Wood pole down at 4,000 feet from GZ. PPOTO 81-XIII. Broken wood pole 4,500 feet from GZ. PHOTO 82-XIII. Burned poles 4,500 feet from GZ. 209 PHOTO 33-XIII. Broken and replaced wood pole 4,500 feet from GZ. PHOTO 84-XIII. Broken wood pole at 4,500 feet from GZ. PHOTO 85-XI1I. Burned poles at 5,500 feet from GZ. This area was 40 percent built up Burning of area resulted also in burning of poles. 210 PHOTO 86-XIII. Tilted wood poles 7,000 feet from GZ. Note flash burns and severe tilt away from blast. PHOTO 87-XIII. Charred poles 7,500 feet from GZ. PHOTO 88-XIII. Scorched poles and wire down 8,000 feet from GZ. 211 i. By the end of September 1945, when all avail- able substations were in operation 40,000 kilowatt- hours per day for lamps and 10,000 kilowatt-hours per day for motors and heaters were being con- sumed. This indicated a 50-percent reduction in the use of lamps and 94-percent reduction in the use of heaters and motors, or an 80-percent over-all reduction in the use of all electrical facilities. j. The estimated cost of damage to the electrical power and light facilities on 15 November 1945 was 10,000,000 yen, or $2,500,000 at the 4-yen-to-a- dollar rate of exchange. k. Of the 600 employees of the Chugoku Elec- tric Co., 100 were killed, 100 injured, and 50 missing. 4. Recommendations and Conclusions a. The electrical generating, transforming, and transmission equipment of the Nippon Electric Co. and the Chugoku Electric Co. was on a stand- ard comparable to that used in the United States. This was not unexpected, since the design data for the equipment of these Japanese firms were supplied by the leading electrical companies of the United States, Some modifications in the equip- ment, however, were made by the Japanese. With the exception of the Otemachi and Sendamachi substations, the substation equipment successfully withstood the effects of the attack. Had fires not reached the Sendamachi substation at 8,000 feet from GZ, it is believed that damage would have been confined to equipment in the same degree as that at the Dambara substation at 8,200 feet from GZ (Table 15). If adequate fire protection had been maintained in the Sendamachi substation, damage would have been slight. Auxiliary pumps, however, would have been necessary to protect these vital utilities in case of power failure. Fires in the Otemachi substation were caused by the short-circuited equipment. Only one substation which amounted to 15 percent of the substation system was put out of service by blast and result- ing short-circuit fires. The remaining substations, having suffered only slight equipment damage, were operative wtihin a short time. From these facts it is considered that with modern equipment and normal fire protection 85 percent of the sub- stations would be immune to an attack of this type. b. With the exception of the office building of the Chugoku Electric Co., which was structurally damaged by blast, the substation buildings, being well dispersed, received only damage extending from superficial to slight, as shown on Table 15. It appears evident in this case that dispersal of substations was adequate protection, but these con- ditions could be improved by the elimination of combustible material in or near the structures. c. The 110- and 22-kilovolt overhead transmis- sion systems received no blast or fire damage, a terminal of a 22-kilovolt line being at the nearest point, 5,700 feet, from GZ. The 3.3-kilovolt lines with the connecting feeders were particularly vulnerable to an attack of this type, and approxi- mately TO percent of the transmission lines were damaged. The Type 1 poles were damaged by blast up to 1,500 feet from GZ and by fire up to 7.000 feet from GZ. The Type 3 poles were vul- nerable to 0,000 feet from GZ. Since there was no Type 3 poles farther than this from GZ, the limit at which they could withstand the blast could not be determined. Inasmuch as only 10 percent could be salvaged from the 70-percent damage, a consid- erable amount of replacement and repair to an overhead system carried on Types 1 and 3 poles could be anticipated from an attack of this sort. d. Since the subsurface lines buried 4.5 feet be- low ground elevation were undamaged, all 22-kilo- volt lines were available for use. If costs were not exorbitant, a subsurface system for lines of lower voltages would be the best protection. D. TELEPHONE COMMUNICATIONS SYS- TEMS 1. Summary a. Traffic. The Bureau of Telephones of the governmental communications department admin- istered and operated all telephone communications within and through the city of Hiroshima which was divided into two districts, the Central District, which maintained a manually operated system and had 5,500 subscribers, and the Western District, which maintained a dial system with 3,400 sub- scribers. The average local traffic per month was 3.240.000 calls. Long-distance calls, averaging 435.000 per month, were routed through the central district. Telephones and equipment were of Western Electric design and Japanese manu- facture. b. Transmission System. The transmission sys- tem consisted of both overhead and subsurface lines. The Central District (Fig. 13) maintained 104,790 feet of overhead cable carried by 4,958 poles, and 30,232 feet of conduit-encased, subsur- face cable. The Western District maintained 53,660 feet of overhead cable carried by 2,493 poles, 212 HIROSHIMA TELEPHONE COMMUNICATION SYSTEM LEGEND DAMAGE RADII LIMIT OF BLAST DAMAGE TO OVERHEAD CABLES (8000‘) LIMIT OF FIRE DAMAGE TO TYPE I POLES (6500‘) LIMIT OF BLAST DAMAGE TO TYPE I POLES (4500') OVERHEAD UNDERGROUND INTERURBAN UNDERGROUND SUB-RIVER CROSSINGS APPROXIMATELY 4.00 FEET UNDER BOTTOM PAIR OF WIRES PER CABLE HIROSHIMA HIROSHIMA PREFECTURE. HONSHU. JARAN CONTOUR INTERVAL 20 METERS GRID SYSTEM BASED ON 1000 YARD WORLD POLYCONIC GRID SECRET U. S. STRATEGIC BOMBING SURVEY TELEPHONE SYSTEM HIROSHIMA,JAPAN FIGURE 13-Xm 731568 O - 47 (Face p. 212) and 9.770 feet of conduit-encased cable. All sub- surface cable was buried 4 feet below ground ele- vation. Intersections occurred at manholes, of which there were 223. Because of the number of branches of the Ota River, 18 bridge cable cross- nigs and 9 subriver crossings were necessary. Subriver cable was buried 4 feet below river bottom. c. Building Damage. The buildings of the Cen- tral and Western District exchanges are treated in the building damage section and are found in Table 23. The initial damage to the equipment in both exchanges was by blast. Fires from short circuits totally damaged all equipment in the Cen- tral District exchange, but new, enclosed-type equipment in the western district reduced short- circuit fire damage to 50 percent. All telephone communications were disrupted. d. Overhead' Transmission System Damage. Approximately 80 percent of the overhead system was damaged by blast and fire; 97,280 feet of cable and 4,551 wood poles being damaged in the Central District, and 51,280 feet of cable and 2,293 wood poles in the Western District. A 10-percent sal- vage value was estimated. Wood poles were dam- aged by blast at 4,500 feet from GZ and burned at 6,500 feet. Cable was stripped from hangers at 8,000 feet. e. Bridge Damage. There was no damage to the conduits and manholes carrying the subsurface system. Damage to Bridges 6,13A, 21,24, and 29, however, as well as damage to cable exit points on conversion to overhead, put approximately 80 per- cent of the subsurface system out of service. By 15 August 1945, 35 pairs of subsurface cable had been repaired and were available for use. All bridge data are covered by the Bridge Damage Section, and any conclusions drawn by that sec- tion for means areas of effectiveness for bridge will apply also for this section. /. Subsurface Transmission Damage. The sub- surface system at 4 feet below ground elevation would have been intact if it had not been exposed to exterior damage at bridge crossings and exit points to the overhead system. Approximately 80 percent of the subsurface system was put out of service, but the majority of the cable was salvageable. g. Cost of Damage. The estimated cost of dam- age to telephone communications by the attack was approximately 10,000,000 yen, or $2,500,000 at the 4-yen-to-a-dollar exchange rate. h. Casualties. Of the 900 personnel employed, 350 were killed, injured, or missing. 2. The System a. All telephone communications in Hiroshima were under strict government supervision. The telephone service was divided into two types, the dial and manually operated systems. The Central District, all that portion of Hiroshima east of the Ota River, utilized the manually operated system, having 5,500 subscribers serviced through Ex- change Building 43, The Western District util- ized the dial system, having 3,500 subscribers placing calls through Exchange Building 85. In addition, there was a relay station for interurban service through Hiroshima. The local telephone traffic within the city for both types of exchange averaged 3,240,000 calls per month. All long-dis- tance traffic was routed through the Central Dis- trict exchange and via the Western District exchange, if the call was placed or taken in that district. The long-distance traffic averaged 435,000 calls per month. The locations of the telephone-exchange buildings in the Central and Western districts of Hiroshima City, listed as Buildings 43 and 85, respectively, by the Building Damage Section, and all overhead and subsurface transmission systems of the Bureau of Telephones, Governmental Communications Department, are indicated on Figure 13. b. The manually operated telephonic equipment in the central exchange building was of the Western Electric Co. type, manufactured by the Oki Electric Co. Installation of equipment was completed in 1920 by the same company. The dial telephone equipment in the Western Exchange Building was also based on the Western Electric Co. type and manufactured by the Oki Electric Co. which completed the installations in February 1940. All telephones were of Western Electric manufacture. Conversion equipment for both ex- change buildings was of Japanese design and manufacture, e. As shown on Figure 13, both overhead and subsurface transmission systems were used. The number of pairs and length for each circuit are shown in Table 20. (One pair of wires was neces- sary for each telephone connection.) The length of pairs was measured to the city lim- its only. Standard, lead-sheathed telephone cable was used in both overhead and subsurface systems. Of the 4,958 poles in the Central District, 4,951 were wood, 2 were steel, and 5 were concrete. The 213 d. All subsurface conduit was buried 4 feet be- low ground elevation. Intersections of cables in the subsurface system occurred at manholes which totaled 223. Of these, 10 were brick and 213 were reinforced concrete. Figure 15 shows the con- struction of both types. The brick manholes were built when the telephone system was first started, but were later discarded in favor of the reinforced- concrete type. The manholes were not water- proofed nor did they have drains. Because of the numerous branches of the Ota River passing through Hiroshima, 27 crossings were necessary for the local and long-distance circuits. Of these, 18 were bridge crossings and 9 were subriver crossings, one of the latter being a local circuit, and the others, long-distance lines as shown on Figure 13. Conduits were buried 4 feet below river bot- tom. Table 22 gives lengths of bridge cable crossings. Conduit-protected cable was attached to some steel and concrete bridges, but no conduit was pro- vided for cable on timber bridge crossings. e. There were approximately 900 persons em- ployed by the Bureau of Telephones for office work and maintenance operations. 3. Analysis of Damage a. The Central and Western Districts Exchange Buildings were listed as Buildings 43 (Photo 89) and Building 85 (Photo 91), respectively, by the Building Damage Section, and the damage analysis for these buildings is contained in that Table 20.—Overhead and subsurface transmission cable Number of pairs per cable Central district Western district Subsurface (feet) Overhead (feet) Subsurface (feet) Overhead (feet) 1,200 - 4, 532 7, 476 7, 696 6, 194 1, 463 970 1, 901 2, 869 1, 624 3, 633 1, 358 258 32 800 BOO _ _ 400 200 374 53, 328 32, 944 13, 773 4, 462 100 ______ 50 25.. _ 26, 445 18, 926 6, 818 1, 477 15 and under Western District had wood poles only, numbering 2,493. Figure 14 illustrates details of the types of poles used. In designing the telephone system the Bureau of Telephones favored the use of large cables for subsurface transmission and small cables for the overhead system to facilitate connections to subscribers. Various types of ducts or conduits were employed as indicated in the following table; Table 21.— Types of conduit Conduit type Mains (feet) Laterals (feet) Outside diameter (inches) Wall thickness (inches) Half-iron, half-steel 18, 761 53, 201 2. 953 0. 355 Cast-iron __ _ _. 5, 443 6, 592 2. 953 . 315 Asbestos-cement 1, 200 2, 800 2. 953 . 315 Tile ducts 1, 143 5, 401 Varies Varies Table 22.—Cable over-crossings Bridge Grid Length (feet) Type of bridge Number of pairs per cable Protection Local or interurban 4 5J 276 Concrete 800 Conduit Local. 5 5J 248 do 960 do Do. 6 41 266 Timber 100 None Do. 8 41 518 Concrete 200 do - _ Do. 12 51 208 Plate girder 960 Conduit Do. 13A 51 307 Timber 1, 800 None Do. 16 61 316 Concrete 100 Conduit Interurban. 17 7H 544 Plate girder 1, 400 do Local. 19 6G 259 Concrete 100 _ do Interurban. 21 5H 295 Timber 1, 000 None Local. 22 5H 164 Plate girder . 1, 200 Conduit Do. 24 4GH 398 do 800 do _ Do. 27 3G 200 Steel arch 600 do_ Do. 29 5G 263 Pin-connected truss 2, 000 do^ Do. 31 6H 358 Concrete 100 do Interurban. 33 6F 410 do , 100 Overhead Local. 37 5G 180 Plate girder 2, 000 Conduit Do. 48 4E 240 do _ _ 600 do Do. 214 SECRET POLES FOR TELEPHONE COMMUNICATION TYPE 5 TYPE I SECRET U.S. STRATEGIC BOMBING SURVEY TYPE 3 TELEPHONE POLES HIROSHIMA, JAPAN FIGURE 14-ZIII 215 SECRET TELEPHONE COMMUNICATION SYSTEM MANHOLES STANDARD SQUARE CONCRETE MANHOLE STANDARD ROUND BRICK MANHOLE SECRET U S STATEGIC BOMBING SURVEY TELEPHONE SYSTEM MANHOLES HIROSHIMA, JAPAN FIGURE 15 jm 216 Table 23 X114.— Hiroshima telephone communications system—building data [Areas in 1,000’s of square feet] Build- ing Grid Usage Type Plan area Stories Build- ing HE-V Build- ing Fire-V Dis- tance AZ (feet) Total floor area Building damage (floor area) Equipment damage Structural damage Super. damage Minor damage Per- cent Cause Blast Fire Mixed Blast Fire 43 85 5H 40 Telephone exchange. El El 2/3 3 VI VI R R 2,800 3,800 36.1 14.2 100 50 Fire. Mixed. Moderate... section. Table 23, however, shows the extent of damage to each building. h. The equipment in the Central District (Photo 90) and the Western District (Photo 92) Exchange Buildings, which were 2,800 and 3,800 feet, respec- tively, from AZ, was initially damaged by blast. Short circuits from damaged equipment started fires that totally damaged the equipment in the Central District Exchange Building. Eyewit- nesses stated that the equipment was afire immedi- ately after the explosion, corroborating a statement made by the chief engineer of the Bureau of Tele- phones. Since the equipment was on the opposite side of the building facing AZ, adequate protection from radiant heat was afforded by the concrete slabs. It was therefore concluded that short cir- cuits were the cause of the fire, which was in agree- ment with the Japanese. The equipment in this exchange was of the old, open type and burned freely; the Western District Exchange equipment, being of recent manufacture, was enclosed and the damage due to blast and short circuit fires was re- duced to 50 percent, but the damage was sufficient t° halt all telephone communications. Blast and fire destroyed approximately 7,000 telephones. c. The greatest damage to the telephone trans- mission system was in the overhead section (Photos :16, *17, *18, *22, *23, and 94 through 98). The majority of poles, being wood, were downed by l,last or were consumed by the fire that followed. Lead-sheathed cables were totally damaged by fice, being consumed up to the point of entry of Lie subsurface system (Photo 93). Wood poles ( Photo #87) were broken off at varying heights UP f° 4,500 feet from GZ and were burned (Photo at a distance of 6,500 feet from GZ. Cable (Photo 98) was stripped from the hangers at a distance of 8,000 feet from GZ, but the poles were upright and the cable was otherwise undamaged. Figure 13 indicates the extent of damage to the overhead system and shows the distances to GZ. Table 24 lists damage to the overhead transmission system. No. of pairs per cable Central dis- trict (feet) Western dis- trict (feet) 200. _ 374 47, 850 29, 650 12, 600 2, 262 4, 551 100. 23, 790 17, 180 6, 700 1, 320 2, 293 50 . 25 15 and under Wood poles Table 24.-—Damage to overhead system No concrete poles were damaged (Photo *23). Approximately 80 percent of the overhead system of both (he Central and Western District was dam- aged. The salvage value of the damaged equip- ment and materials for the overhead systems was estimated at 10 percent. d. Upon examination of the subsurface trans- mission system by officials of the Bureau of Tele- phones subsequent to the attack, no damage to manholes or ducts was found. Examination of manholes by members of the survey revealed no evidence of cracks, breaks, or other damage. Al- though no actual damage was done to the subsur- face system in itself, the damage to bridges (Photos 99 through 104) serving as overcrossings and exit points on conversion to the overhead system put out of service approximately 80 percent of the subsurface system. Table 25 indicates the damage to bridges as estimated by the Bridge Damage Section. 217 PHOTO 89-XI1I. Bureau of Telephones’ Central District Exchange Building showing damaged equipment, 2,000 feet from CZ. PHOTO 90-XIII. Equipment damage in the Central District Exchange Building. 218 PHOTO 91-XIII. Bureau of Telephones’ Western District Exchange Building, 3,300 feet from GZ PHOTO 92-XIJI. Equipment damage in the Western District Telephone Building. 1315(;8—4 ~— rj 219 PHOTO 93-X1II. Telephone-cable transition from subsurface to overhead system damaged by blast and fire, 1,200 feet from GZ. PHOTO 94-XIII. Damaged wood pole and cable, 2,500 feet from GZ. PHOTO 95-XIII. Stripped cable 4,500 feet from GZ. 220 PHOTO 96-XIII. Steel-lattice poles, 6,000 feet from GZ. Poles were downed by blast across road, but were removed to make way for traffic. PHOTO 97-XII I. Damaged cable, 7,500 feet from GZ. PHOTO 98-XIir. Cable downed, 8,000 feet from GZ. 221 Bridge Grid Length (feet) Distance from GZ (feet) Type Cause of damage Extent of damage Number of pairs per cable 6 41 266 6, 100 Timber Blast and fire Complete destruction 100 13A 51 307 4, 700 1, 400 1, 000 - do do_ 1, 800 1, 000 800 21 5H 295 do Blast do 24 4G-H 398 Plate girder _ do Slight damage 29 5G 263 1, 200 Pin-connecting truss _ do Complete destruction 2, 000 Table 25.—Damage to overcrossings Figure 13 shows the location of the damaged bridges. Although Bridge 24 was not down (Bhotos 103 and 104), the severe blast effects parted the transmission cables. There was no damage to subriver crossings. Thus, the several types of damage put out of service the cables in each district as given in Table 26. Table 27.— Damage to overcrossings by flood Bridge Grid Length (feet) Type Num- ber of pairs per cable Extent of damage 31 6H 358 Concrete - 100 Severe damage. 33 6F 410 do 100 Do. 37 5G 180 Plate girder - 2,000 Do. Table 26.—Damage to subsurface system Number of pairs per cable Central dis- trict (feet) Western dis- trict (feet) 1,200 . 3, 880 6, 350 2, 540 1. 470 800 600 6. 470 3, 250 1, 200 200 400 _ _ _ _ 5, 300 200_____ . 320 860 1, 700 100 50 32 6, 666 The remaining bridges were undamaged. Addi- tional repairs had to be made and circuits re- routed. As explained in the Sanitary and Storm Sewer Section of this report, water tables that were normally 8 to 12 feet below ground elevation rose to within 3 feet of ground elevation (Photo 105). Since manholes were neither water-proofed nor drained, water seeped through the concrete walls and saturated the conduits. This caused more delay in the repair of the remaining sub- surface system. Cables, being lead-sheathed and well protected at manhole intersections, were not water damaged. The telegraphic system under the Bureau of Telegraphs was totally damaged, and the system was merged with the Bureau of Tele- phones. One telegraph line communicating with Tokyo and Osaka was operating by the middle of September 1915. e. The cost of damage, as estimated by the Bu- reau of Telephone officials on 15 November 1915, was approximately 10,000,000 yen, or $2,500,000, at the 1-yen-to-a-dollar rate of exchange. /. Of the 900 persons employed by the Bureau of Telephones, there were 350 persons killed, in- jured, or missing in the Central District Exchange Building and maintained areas, but none were killed in the Western District Exchange Building. g. Information regarding telephones, telephone equipment, telephone transmission system, and personnel was acquired from the chief engineer of the Bureau of Telephones in Hiroshima. Repairs and reconstruction began almost immedi- ately and by 15 August 1945, 35 pairs of subsurface transmission cables were back in service. These were used entirely by the prefectural government and Japanese military units. Since the equipment in the Central District Exchange Building was totally damaged, all telephone traffic was routed through the Western District Exchange. With the exception of the breaks at bridge crossings, connections were remade iu subsurface circuits. By 30 August 1945, 50 pairs were available for long-distance use with the following cities: Tokyo, Osaka, Okayama, Shimouoseki, Fukasho, Iwakuni- Beppu, Matsuama, Takamatsu, Zentsuji, and Matsue Hamada. Ten lines devoted to outlying vicinities of Hiroshima. During the floods of September 1945 and 5 October 1945, additional serious damage was added to that suffered as a result of the atomic-bomb attack. More bridges serving as overcrossiugs were damaged, as given iu the following table: 222 PHOTO 99-XIII. Damage to cable at Bridge 13A, 4,700 feet from GZ. PHOTO 100-XIII. Damage to 2,000-pair cable at Bridge 29; 1,200 feet from GZ. PHOTO 101-XIII. Flood damage to Bridge 31 carrying 100-pair cable, 4,600 feet from GZ. PHOTO 102-XIII. Flood damage to Bridge 37 carrying 1,000-pair cable, 3,200 feet from GZ. 223 PHOTO 103-XIII. Damage to telephone conduit cable at Bridge 24, 1,000 feet from GZ. PHOTO 104-XIII. Broken cable conduit at Bridge 24. 224 PHOTO 105-XIII. Water-filled, telephone manhole. PHOTO 106-XI11. Debris-damaged telephone manhole cover 100 feet from GZ. Secondary cover undamaged. 225 4. Recommendations and Conclusions a. At the time of the attack the telephone com- munications system, although well designed and maintained, was particularly vulnerable to an air- detonated atomic bomb because of the method of transmission. The reasons for the disruption of 80 percent of both the overhead and the subsur- face transmission systems were as follows: (1) The overhead system was carried on wood poles which were vulnerable to blast and fire. (2) Damage by fire and blast occurred at points of conversion from subsurface to overhead system. (3) The bridges used as overcrossings for cables were damaged by blast and fire. h. Had the subsurface system been divorced from overcrossings and had subriver crossings been used with well-protected exits to overheads, this part of the entire system would have been practically free of damage. Thus, the best pro- tection against this type of attack for telephonic communications would have been an entire sub- surface system for the city proper. The subsur- face system would have minimized the necessity of repairs. As shown by the existing subsurface system at Hiroshima, no damage occurred to the conduits or manholes 4 feet below ground level. c. Exchange buildings would have to be numer- ous, well dispersed, and completely interconnected as stand-by units to insure service in the event of damage to the primary equipment. E. WATER SUPPLY SYSTEM 1. Summary a. Capacity. The city of Hiroshima main- tained a water supply system capable of producing 20,000,000 gallons of filtered water per day, or an average of 50 gallons per day per person. This system served approximately 90,000 buildings and dwellings including factories and other plants that required filtered water. In addition to the pota- ble water, wells were dug or drilled as supple- mentary sources for industrial and other uses. h. Location. The purification plant was ap- proximately 2 miles in a northerly direction from the center of the city and the pumping station was one mile beyond the purification plant. Both were located on the Ota River (Fig. IG). c. Equipment. Table 28 shows the buildings utilized by the water supply system. Building 1 had four river-intake pumps; Building 3 housed the standby units consisting of three Diesel-motor pumps and one generator; Building 4 contained three booster pumps; two recording meters were in Building 5; in Building 6 were four reservoir pumps; and the pumping station had four river- intake pumps. d. Filter Bed*. There were seven sand filter beds of 21,120 square feet each, with a 23-foot filtration rate per day through 3 feet of sand. e. Reservoir. A reinforced-concrete, earth-cov- ered reservoir of 4,500,000 gallons capacity was located 105 feet above the purification plant, f. Piping. All subsurface piping was standard 250-pounds-per-square-inch, cast-iron, bell-and- spigot pipe. Equipment connections had screw ends with flange and bolt connections. Table 29 shows the lengths of cast-iron mains used in Hiro- shima. Branches for dwellings varied from y2 to 144- inches and, for buildings, 2 to 4 inches. All mains were buried 4 feet below ground elevation. g. Valves and Hydrants. There were approxi- mately 132 cast-iron gate valves rated at 250- pounds-per-square-inch pressure. Hydrants were of two types, standard and flush, and were spaced GOO feet apart in congested areas. h. Booster Pumps. There were three booster pumping stations, including the one at Koi. At the Koi station there was also a reinforced-concrete water tower of 234,000 gallons capacity. i. Overcrossings. Because of the delta system on which the city of Hiroshima was built, 17 river crossings were required. Of these, 14 were on bridges constructed and maintained by the city highway department and the prefectural govern- ment; the remaining three were aqueducts, con- structed and maintained by the water department of Hiroshima. Table 32 gives the overcrossings and the sizes of mains carried. j. Camouflage. Attempts'at camouflage were made by the Japanese to conceal the purification plant and the Koi booster station. k. Damage to Equipment and Buildings. Dam- age by blast to the pumping station at 14,000 feet, and the purification plant at 9,200 feet from was slight. Ao fires occurred in these areas. On6 mootor in building 4 was burned out because of falling debris, and the metering equipment in building 5 suffered heavy damage. Building dam- age is found in Table 28. All buildings in Table 28 are classified similarly to the buildings of the building damage section. Any conclusions drawn for the mean areas of effectiveness for buildings and equipment in that section will also apply t° the buildings and equipment in this section. 226 HIROSHIMA WATER DISTRIBUTION SYSTEM LEGEND POINTS AT WHICH PRESSURE TESTS WERE TAKEN POINTS AT WHICH BREAKS OCCURED HIROSHIMA HIROSHIMA PREFECTURE. HONSHU, JAPAN CONTOUR INTERVAL 20 METERS GRID SYSTEM BASED ON 1000 YARD WORLD POLYCONIC GRID SECRET US STRATEGIC BOMBING SURVEY WATER DISTRIBUTION SYSTEM HIROSHIMA, JAPAN figure i6-xnr 731568 0 - 47 (Face p. 226) /• Damage to Piping. Hiroshima water depart- ment officials attributed eight leaks in the mains lot he attack. Upon inspection, it was the opinion <>f the team that one leak was developed by the action of Bridge 22 which was directly affected by ll>i‘ blast, and that the remaining leaks resulted Irom falling debris and other causes. There were no crushed mains. Approximately 70,000 branches vere fractured or dislocated when buildings were damaged by blast and fire. m. Valves and Hydrants. One cast-iron valve, 4 inches in diameter, and a few standard hydrants were damaged by falling debris. No flush-type hydrants were damaged. n. Booster Pumps. The booster pumping sta- tion equipment was damaged only slightly, but the buildings of Stations 1 and 2 were structurally damaged by the blast. o. Overcrossings. Bridge 29 which carried a 16-inch main was put out of service; this damage, however, had no effect since a 16-inch main across Bridge 30A served the same district. Bridge 43, carrying a 14-inch main, suffered damage by blast and fire which greatly decreased the water volume in the area which it served. Floods of 17 Septem- ber and 5 October 1945 damaged other structures. Table 32 is a summary of bridge damage. All bridge data are classified in the Bridge Damage Section, and any conclusions drawn for the mean areas of effectiveness for bridges and their attend- ant utilities are applicable to this section. p. Cost of Damages. The cost of damages as estimated on 15 November 1945 was 3,000,000 yen, or $750,000 at the rate of 4-yen-to-a-dollar. 2. Description of the System a. In order to give a better description of the water distribution system, Figures 16 and 18 are in- cluded to show the locations of buildings and pip- ing of the pumping station and the purification plant, as well as the distribution system within Hiroshima, including booster pumps. h. The purification plant was approximately 2 miles north of the center of the city, and the pump- ing station was located 1 mile beyond the purifica- tion plant, both on the Ota River. Water was taken from the Ota River and, after being proc- essed in the purification plant, was piped to Hiro- shima. The average daily water-consumption rate was 20,000,000 gallons or 50 gallons per day per person. Approximately 90,000 buildings and dwellings were serviced, including factories and production plants which required pure water for operations. The 90,000 buildings and dwellings were divided into 12 water districts and -1 commu- nities, namely Kusatsu, Misasa, Niho, and Mukainada. The population of each district or community varied in size and density of popula- tion, ranging from 6,700 people in Mukainada to 71,000 in District 12. In addition to the water- distribution system, 85 percent of the dwellings had wells from which water for other uses was drawn. These wells were either dug or drilled to obtain water at the normal water table which was from 12 to 16 feet below ground level. Approxi- mately 20 percent of the wells were dug and 80 percent were drilled. Thus, with a combination of the water-distribution system and the well system, there was more water available than the daily average of 50 gallons per day per person furnished by the public system. c. The pumping station shown on Figure 16 was approximately 1,200 feet from the Ota River. A series of interconnected wells, as shown on Figure IT, collected the subsurface water from the Ota River and four electrically-operated, centrifugal pumps transferred it from the river intake to the filtration plant. Each pump had a capacity of 5,220 gallons per minute against a head of 75 feet, and was powered by an electric motor of 165 horse- power at 3,000 volts. The pumping units were de- signed and manufactured by the Inoguchi Shi- baura Motor Co. of Tokyo. The pumping station building was of heavy, reinforced-concrete design with a 3-ton traveling crane; the building classifi- cation is indicated on Table 28. The station was electrically operated and all pumping-unit switches and telltale lights were operated from a single cabinet panel. A single 36-inch, cast-iron, bell-and-spigot main carried water to the purifi- cation plant. d. Figure 18 shows the general arrangement of the purification plant, including buildings, basins, and reservoirs. When raw water was taken at this plant from the Ota River an intake gate or intake tower provided an ingress to the system, as shown on Figures 19 and 20. e. Two 18-inch, cast-iron pipes, or two alternate, 24-inch cast-iron pipes (Fig. 18) carried the water to the intake pumps and straining basin as de- tailed on Figures 21 and 22. Raw water from the pumping station also flowed through this system. It was necessary to have three intake systems be- cause of the heavy flow of alluvial material in the 227 WATER DISTRIBUTION SYSTEM WELL GALLERY INTAKE SECRET SECRET US STRATEGIC BOMBING SURVEY WATER DISTRIBUTION SYSTEM HIROSHIMA, JAPAN FIGURE 17 - Xm 228 GENERAL ARRANGEMENT OF PURIFICATION PLANT. USS3S Eeport 69 HIHOSHIMA FIG 18- XIII Table 28 XIII.—Hiroshima water distribution system— building data [Areas in thousands of square feet] Build- ing Grid Usage Type Plan area Stories Build- ing H E-V Build- ing Fire-V Dis- tance A Z (feet) Total floor area Building damage (floor area) Equipment damage Structural damage Superficial damage Minor damage Per cent Cause Blast Fire Mixed Blast Fire 1 Pump house 1) 1.4 1 V4 R 9, 200 1.4 Slight 2 Storehouse I) 1.4 1 V4 C 9, 2(H) 1.4 Do 3 Pump plant . . _ A 2.3 15.3 1 V4 C 9, 200 15.3 1. 1 Do 4 Pump house D .0 1 V4 C 9, 2(H) .6 . 2 50 5 Meter station . D .3 1 V4 R 9,200 .3 20 6 Pumphouse . ... 1) 2. 1 1 V4 C 9, 200 2. 1 . 5 7 Chlorine plant.. 1) .2 1 V4 R 9, 2(H) .2 Do 8 Office D .8 1 V4 C 9, 200 .8 . 8 9 Watch station D .4 1 V4 C 9,200 .4 Pump Pump house 1) 2.6 1 V4 R 14,(HH) 2.6 Do. station. Ota River which completely filled the intakes with sand and gravel during flood stages. /. The four intake pumps in Building 1 had a capacity of 2,600 gallons per minute against a 32-foot head. The electric motors for the pumps were rated 35 horsepower at 3,000 volts AC. Pump units were of Japanese design and manu- facture. In order to insure a continuous flow of water, the Diesel-powered pumps in Building 3 (Figs. 23, 2-f, and 25) were used as a stand-by unit in case of break-down of the main pumps in Build- ing 1. The three Diesel engines and pumps were of Deutz design and German manufacture, each having a capacity of 2,620 gallons per minute at 200 horsepower against a 32-foot head. In addi- tion to the main and auxiliary pump station, a booster station at Building I was maintained con- sisting of three electrically operated pumps, each having a capacity of 3,320 gallons per minute at 210 horsepower against a 32-foot head. g. The settling basins or reservoirs are shown on Figures 26 and 27. Until the outbreak of the war the water was chlorinated, but, due to the priorities placed on chlorine, none was available thereafter for water chlorination. The chlorine was intro- duced into the water prior to filtration. This was accomplished at the chlorination plant (Building 7), which is shown on Figure 28. The capacity of the chlorination plant was approximately 600 cubic feet of gas per day. All equipment in the plant was of Japanese manufacture and design. There were seven sand-filter beds, 21,120 square feet each, capable of a filtration rate of 23 feet of water through 3 feet of sand per day, or a total of approximately 80 acre-feet of water per day. Cleansing and processing of sand took place every 30 days. Figures 29 and 30 show details of the filter beds. h. The pumping station at Building 6, which transferred filtered water to the reservoir, con- sited of four electrically driven pumps, each hav- ing a capacity of 5,220 gallons per minute against a head of 165 feet. The pumps were driven by 165-horsepower electric motors operated at 3,000 volts. One motor unit was of Swiss design and manufacture; the remaining three were manufac- tured by the Inoguchi Shibaura Motor Co., of Tokyo. Figures 31 and 32 show the details of this station. Building 5, the metering station, controlled the flow of water to the distribution systems. Two recording meters kept continuous charts of maximum and minimum flow at demand and slack periods. i. It will be noted that all the powered equip- ment was electrically operated with the exception of the stand-by Diesel-powered pumps. The Sui- genchi electric substation of the Chugoku Electric Co. (a subsidiary of the Nippon Electric Co.) pro- vided all the power, transforming 22 kilovolts down to 3,000 volts. This power substation was located at the purification plant. In addition to the Suigenchi substation, an auxiliary source of electric power was maintained in case of failure of the Chugoku Electric system. The auxiliary unit, located in Building 3 was a Diesel-powered generator of the German Deutz type, generating 260 kilovolt-amperes at 3,000 volts. The Diesel engine developed 350 horsepower. Table 28 sum- marizes the buildings at the pumping station and purification plant (Fig. 23) and shows the classifi- cation. 230 LONG.SECTION. TRANS. SECT I ON. GENERAL PLAN. i .... INTAKE GATE. FRONT ELEVATION. PLAN. USSBS Report 69 HIROSHIMA FIG 19-XI11 231 BACK VICW, TRANS. SECTION. INTAKE TOWER GENERAL PLAN. 8I0C VIEW. PLAN. USSBS Report 69 HIROSHIMA FIG 20-XIII 232 INTAKE-PUMPHOUSE. back view. FRONT VIEW. otoc view. WLAN. SCALC row DCTAA-a USSBS Report 69 HIROSHIMA PIG- IT 233 STRAINING BASIN AND INTAKE PUMPS. SECTION A— a PLAN. SCAUl USSBS Renort 69 HIROSHIMA FIG 22-XIII 234 DIESEL. ENGINE PUMPING PLANT. PLAN. USSBS P-eDort 69- HIROSHIMA FIG 23-XIII 731568—47 K; 235 DIESEL ENGINE PUMPING PLANT. SECTIONAL ELEVATION. USSBS Report 69 HIROSHIMA FIG 24-XIII 236 PUMPING STATION. DIESEL ENGINE PUMPING PLANT. OIL STORAGE TANK. POWER STATION. USSBS Report 69 HIROSHIMA FIG 25-XIII 237 DRAIN AND OVER-FLOW. PLAN. INLET CONNECTION. . PLAN SETTLING RESERVOIRS. SECTION. OUTLET. USSBS Report 69 HIROSHIMA FIG 26-XIII 238 TRANS. SECTION. FLEXIBLE JOINT. L GENERAL PLAN. LONG. SECTION. SECTION B-B. SETTLING RESERVOIR SECTION A-A. SECTION C-O. mcAUC rom omr*u. •oauc r), and reservoir were undamaged. No leaks in piping or mains to or from the intakes, settling basins, filterbeds and the reservoir had been detected. The water in the reservoir, how- ever, dropped to a seriously low level because of leaks in pipes within the city. e. Building and equipment damage is summa- rized in Table 28. With the exception of Bridge 29, which will be discussed in another paragraph, 8 leaks in the water-distribution system (Fig. 16) were found by the water-department officials and were attributed to the blast effect of the atomic bomb. After inspection of leaks 1, 2, and 3 (Fig. 16) in the 16- and 18-inch mains, it was found that leak 1 (Photo 11T) was in a 4-inch diameter, cast- iron lateral, directly over a 16-inch main, broken at the valve body by a falling 19-inch brick wall from an adjacent building. Leak 3 (Photo 119) 246 OVER-FLO*. ; SECTION a~» OUTLET. CLEAN WATER RESERVOIRS SECTION a—a . I ENTRANCE OF INSPECTION GALLERY, GENERAL. «_AN. USSBS Report 69 HIROSHIMA FIG 33-XIII 247 INLET. OVER FLOW, BAFLLE WALL. CLEAN WATER RESERVOIRS. OUT LET. CONNECTION. SIDE WALL. GENERAL PLAN. LONG SECTION. USSBS Report 69 HIROSHIMA PIG 34-XIII 248 SECTION C-C. CLEAN WATER RESERVOIRS I SECTIONS®. SECTION A—*A. PLAN. USSBS Report 69 HIROSHIMA FIG 35-XIII 249 OVER FLOW.” CLEAN WATER RESERVOIRS. LONG. SECTION. INLET. OUTLET. USSBS Eeport 69 HIROSHIMA FIG 36-XI11 250 MILITARY SUPPLY PLANT GENERAL PLAN. STAND HOSE COUPLING USSBS Report 69 HIROSHIMA FIG- 37-X1II STOP VALVE 731508—47 17 251 KANDABASHI AQUEDUCT. GENERAL ELEVATION. GENERAL PLAN. USSBS Resort 69 HIROSHIMA FIG 38-XIII 252 DETAILS FOR KANDABASHI AQUEDUCT. TRUSS. USSBS Report 69 HIROSHIMA FIG 39-XIII 253 ENKOBASHI AQUEDUCT GENERAL PLAN. USSBS Report 69 HIROSHIMA FIG- 40-XI11 254 DETAILS FOR ENKOBASHI AQUEDUCT. PER. -muss. USSBS Eeport 69 HIROSHIMA FIO 41-XIII 255 SAKAEBA8HI AQUEDUCT. GENERAL ELEVATION. GENERAL PLAN USSBS Report 69 HIROSHIMA FIG- 43-XIII 256 SHINOBASHI AQUEDUCT. GENERAL ELEVATION GENERAL PLAN. USSBS Report 69 HIROSHIMA FIG 43-XIII 257 DETAILS FOR" SHINOBASHI AND SAKAEBASH1 USSBS Report 69 HIROSHIMA FIG 44-XIII 258 PHOTO 107-XIII. Pumping station Building, 14,000 feet from GZ. Windows broken by blast. PHOTO 108-XIII. Diesel pumping plant, Building 3, 9,000 feet from GZ, showing window frames damaged by blast. 259 PHOTO 109-XIII. Equipment and electrical panel at pumping station, 14,000 feet from GZ. 260 PHOTO 110-XI11. Diesel pumping plant, Building 3, showing pumping equipment, 9,000 feet from GZ. PHOTO lll-XIII. Undamaged pumphouse, Building 6, equipment and switch board panel, 9,000 feet from GZ. 261 PHOTO 112-XIII. General view of purification plant showing buildings, filter beds, and reservoir, 9,000 feet from GZ. 262 PHOTO 113-X11I. Pumphouse, Building 6, showing light roof stripping. Note electrical substation, 9,000 feet from GZ. PHOTO 1I4-XIII. Damaged meter and recording equipment in Building 5, 9,000 feet from OZ. 263 PHOTO 115-XIir. Intake system on the Ota River, 14,300 feet from GZ. PHOl O 116-XIII. Filter beds being processed. Note roof stripping on Building 6, 9,000 feet from GZ. 264 PHOTO 117-XIII. Leak 1. Four-inch gate valve broken by debris from 19-inch brick wall, 1,100 feet from GZ. PHOTO 118-X1I1. Leak 2, 100 feet from GZ. Lead-caulking seal broken in 16-inch main; 4-inch main undamaged. 265 PHOTO 119 X111. Leak 3. Street L cracked by building movement, GOO feet from GZ. PHOTO 120-XIII. Leak 4 caused by falling debris, 3,100 feet from GZ. 266 was a cracked street L connected to a 7-inch lat- eral damaged by the movement of the building serviced, and leak 2 (Photo 118) was a break in the lead-canlked seal of an 18-inch main, which could have been caused by the bomb blast, as the main was only 100 feet from GZ, but, in view of the severe action induced in Bridge 22 by the blast, it is more probable that the bridge movement caused this leak, otherwise, a series of leaks would have occurred from the bending action in the mains, occasioned by blast pressure. There was no crush- ing of the mains at any place. Leaks 4 (Photo 120) and 5 were also caused by falling debris but leaks 6, 7, and 8 did not result from the atomic- bomb attack. It was estimated that 70,000 branches or leads were damaged as a result of blast or fire damage to dwellings and other buildings. Because of the great number of open pipes the pressure of a normally low-pressure system dropped to zero. /. With the exception of one valve, referred to previously, all valves were undamaged. A few standard, above-ground hydrants (Photo 121) were damaged by falling debris but no flush-type hydrants (Photos 122 and 123 were damaged. Because of the great number of damaged branches, however, residents pushed the balls of the flush- type hydrants from the seats allowing water to flow for their personal use (Photo 123). After all leaks had been closed off in mains and laterals and in all branches or leads that could be reached, the distribution pressure within the city was brought up to 15 pounds per square inch, but even then 16,000,000 gallons of water per day were required to supply the city. As there were no requirements for water in the city center, that part of the system was discontinued. g. The booster pump station at Koi, 8,000 feet from GZ, was undamaged. Buildings at stations 1 (Photo 124) and 2 (Photo 125) however, 6,600 and 5,600 feet, respectively, from GZ, received structural damage by blast. Apart from the elec- trical panel damage, no other equipment damage resulted from the blast. The pumping station at the Army Divisional Headquarters, 4,600 feet from GZ, sustained the same amount and type of damage as booster pump Stations 1 and 2. No effort had been made to place the booster pump stations or the Army headquarters pump station iu operation. h. Bridge 29 (Photo 126), referred to in a pre- ceding paragraph, was the only bridge acting as a water crossing (Photo 127) that was totally damaged directly by blast. This damage did not deprive the area west of the Ota River of water since there was another 16-inch crossing within the same loop. Bridge 48 (Photo 130) was dam- aged by blast and fire, depriving of water the sec- tion served by it. Bridge 43 was repaired in October 11)45. There was some movement in Bridge 22 caused by blast which broke the seal of leaks (Fig. 16) but not sufficiently to cause inter- ruption of any service. The angle-chord mem- bers of Bridges 30A (Photos 128,121)) were twisted b}T the blast, but the 16-inch main was undamaged and no leaks were noted. The floods of 17 Sep- tember 1945 and 5 October 1945, however, damaged four bridges (Photos 131, 132, and 133) to such an extent as to impair their use as water overcross- ings. The following Table 32 is a summary of bridge damage as given by the Bridge Damage Section: It will be noted that more damage resulted from the floods than from the atomic-bomb attack. i. The cost of damage to the water system as of 15 November 1945 was estimated at 3,000,000 yen, or $750,000 at the rate of exchange of 4 yen to a dollar. 4. Remarks a. The city of Hiroshima maintained an ade- quate, modern water supply system, capable of furnishing 20,000,000 gallons of water a day. The system was of rather recent design, and stand-by units were installed to prevent any interruption in the service. At the time of the attack the source of power supply was actually cut off and the stand- by units were utilized to supply the city. The equipment at the pumping stations and the purifi- cation plant was not damaged enough to discon- tinue service. Thus, it can be seen that stand-by units are essential, and failure of the main unit need not halt operations altogether. h. The 250-pounds-per-square-inch pipe, buried 4 feet below ground elevation, proved to be of ade- quate strength to withstand an attack of the type to which Hiroshima was exposed. Damage to the dwellings and buildings resulted in considerable leakage from the water branch pipes extended to them, thereby reducing the water pressure below normal working pressures. This hampered fire fighting. Because of the vulnerability of buildings and dwellings to an atomic-bomb attack, branches connecting buildings with the mains would be 731568- 47 IS 267 Table 32.—Bridge damage Bridge No. Dist. from GZ (feet) Type Diameter of pipe (inches) Damage Cause 3 7, 130 6, 160 5, 240 6, 950 4, 700 7, 600 4, 270 2, 900 260 4, 360 1, 190 1, 880 4, 540 5, 300 3, 220 5, 200 7, 130 16 Severe Flood. 5 \ 16 None 7 A 22 do 10 20 Moderate _ _ Do. 12 16 None 17 do 12 do 19 18 do 20 Steel I-beam 16 do 99 16 do 27 Steel arch 10 do 29 Steel truss 16 Complete Blast. 30 A do 16 Slight Do. 31 16 Severe Flood. 33 16 do Do. 37 14 ..do - Do. 43 14 ... .do. Blast and fire. 43 12-14 None damaged in approximately the same degree as the structure. This would hold true regardless of the locality of the attack. c. Two booster pumping stations were installed at tlie locations shown on Figure 16 to overcome friction losses in the water supply system. Be- cause these booster stations were improperly placed and were inadequate in capacity, the sys- tem pressure within the city varied from 30 to 10 pounds per square inch (Table 31). Any leaks in the system tended to reduce the pressure to zero for practical purposes. The structures housing these units were of flimsy construction and offered too little protection to the electrical-panel distribu- tion controls. These vulnerable points made the system useless at the time it was most needed. To protect the booster pump stations and insure con- stant pressure in the mains, heavy, reinforced-con- crete structures would be required, as well as shock- resistant electrical distribution panels. A subsur- face, electrical distribution system, referred to in Part C of this section would greatly enhance the chances of continued operations of the booster stations in case of an atomic-bomb attack. d. The damage by blast to Bridge 29 interrupted the service of the 16-inch water main that crossed the Ota River at that location, but other crossings in the same area and in the same loop assisted in supplying water to the area. The twisted members of Bridge 30A indicated that considerable damage was received. Had it not been that the strength of the structure was augmented by the 16-inch water main, it probably would have been further dam- aged. The structures used as water crossings were not damaged sufficiently to put the system out of service, but, in the event of larger bombs, this type of crossing may not be able to withstand blast pressures developed. In view of future possibili- ties, structures such as Bridge 30A, being near to total damage after exposure to the atomic-bomb attack of 6 August 1945, must be considered in- adequate for use as river-crossing aqueducts. F. SANITARY AND STORM SEWER SYSTEM 1. Summary a. Waste Water. Because of the delta forma- tion of Hiroshima, short laterals to the branches of the Ota River were used to dispose of 80 per- cent of the residential waste water, while the re- maining 20 percent was carried through branch pipes to the sewer mains. b. Disposal of Excrement. The lack of natural or artificially produced fertilizer in Japan necessi- tated the collection of human excrement as a sub- stitute. To make this fertilizer available to the farmers on the neighboring islands, the city of Hiroshima made collections from 70 percent of the city area. Charges of 50 sen were made to the residents and 30 sen to the farmer for each 72 of the 130,000 liters per month collected. Collec- tions from the remaining 30 percent of the city, comprising the outskirts, were made by farmers on the mainland. 268 PHOTO 121-XIII. Standard-type hydrants. Lower view, damaged by debris, 3,600 feet from GZ PHOTO 122-XIII. Flush-type hydrant with operating rod. Damaged in warehouse fire. PHOTO 123-XIII. Residents using water from flush type hydrant, when ball valve was pushed from seat, 3,500 feet from GZ. 269 PHOTO 124-XIII. Booster pump station 1. Blast damage to building and equipment, 7,100 feet from GZ. PHOTO 125-XI1I. Booster pump station 2. Blast damage to building and equipment, 5,900 feet from GZ. 270 PHOTO 126-XIII. Bridge 29 carrying water main, damaged by blast, 1,200 feet from GZ. PHOTO 127-XIII. Section of 16-inch water main at Bridge 29, 1,200 feet from GZ. 271 PHOTO 128-XIII. West abutment of Bridge BOA showing minor damage, 1,900 feet from GZ. PHOTO 129-XIII. Blast-damaged aqueduct (Bridge BOA) carrying 16-inch water main, 1,900 feet from GZ. 272 PHOTO 130-XIII. Bridge 43 rebuilt, October 1945. Original bridge carrying 14-inch water main, structurally damaged by blast and fire, 5,200 feet from GZ. PHOTO 131-XIII. Flood damage to Bridge 3 carrying 16-inch main, 7,100 feet from GZ. 273 PHOTO 132-XIIT. Flood damage to Bridge 10 carrying 20-inch main, 7,000 feet from GZ. PHOTO 133-XIII. Flood damage to Bridge 31 carrying 16-inch main, 4,500 feet from GZ. 274 c. Surface Drainage. The sewer mains also served as storm sewers to carry off a rainfall of 2.36 inches per hour. The recorded maximum was 7.87 inches per hour. Drainage water flowed through mains and open flumes (Fig. 45). The water level in the rivers often reached to within 1 foot of the tops of the revetments during flood stages. d. Dumping System. Pumping stations (Fig. 45) were used to pump water from the open ditches to the bay areas when gates could not be opened to permit gravity flow because of high tides. Electric motors and manufactured-gas-driven en- gines were used as power units for the pumps, the manufactured gas being produced at each station. Since the gates at each station, which permitted gravity flow of water when opened or pumping operations when closed, were manually operated, a station attendant was required in each case to operate equipment and gates to keep the rising waters under control. Buildings housing the equipment were of the light-frame type, and are clasified on Table 35. e. Pipe Lines. Because of the absence of human excrement, concrete pipe and open flumes were used extensively. Standard-type manholes were constructed at important intersections and where changes in direction occurred. The flow-line depth in both cases was a maximum of approxi- mately 10 feet below ground elevation. The sewer system was composed of 211,230 linear feet of open flumes of various sizes, 3,170 feet of 48- inch-diameter clay pipe, 5,970 feet of 48- and 30- inch-diameter concrete pipe, and 74,980 feet of concrete-box pipe of varying sizes. Figure 46 shows all types of mains and flumes. f. Damage. Of the 14 pumping stations, the equipment in six stations within a 5,200-foot ra- dius of GZ was heavily damaged by blast and sub- sequent flies. The electric motors in Stations 1 and 5, however, were burned out as a result of debris falling into them while in operation. These sta- tions were damaged by blast. The remaining sta- tions received slight or no damage from the at- tack. The electric substations supplying power to the pumping stations were also damaged and could supply no electricity. Two of the buildings were structurally damaged by blast and five by fire. One building received superficial damage by blast and the remaining buildings were damaged to a minor degree. Table 35 shows the extent and nature of the damage. Since the loss of the system was not too greatly felt at the time because of the fair weather and low water, little or no effort was made to repair the damage to the stations, despite the fact that it was not heavy. The seasonal rains later caused floods which inundated the revetted areas of Hiroshima and raised the water table from its usual level to within 3 feet of ground elevation. This caused serious delay in repairing other utilities which utilized subsurface systems and manholes. All buildings in this report, includ- ing installations and equipment, are classified similarly to those in Table 35 by the Building Damage Section, and mean areas of effectiveness derived by that section for buildings and equip- ment will apply also for this section. g. No damage to mains or flumes was wound by either the city engineer of Hiroshima or by mem- bers of this team. h. Costs of Damage, The city engineers esti- mated the cost of damage to the sanitary and storm sewer system as of 15 November 1945 to be ap- proximately 3,000,000 yen, or $750,000 at the ex- change rate of 4 yen to a dollar. 2. Description of System a. The city of Hiroshima was built upon the delta of six rivers which branched from the Ota River in the northern section of the city. These rivers simplified the disposal of waste water by permitting the use of short laterals leading to them. Since no raw sewage containing human excreta was discharged into the sewer system, the problem of disposal was confined to surface drain- age and residential waste water. The system of short laterals accommodated 80 percent of the res- idences of Hiroshima, while flow from the remain- ing 20 percent was carried through branch pipes to the mains. Mains, open flumes, and sewage pumping stations distributed throughout the city and adjacent areas are shown on Figure 45. h. Because of the lack of artificially produced or natural fertilizers, it was the custom throughout Japan to collect all human excrement for that pur- pose. In Hiroshima a regular collection system provided the necessary fertilizers for the agricul- tural districts. Approximately 70 percent of the collection was performed on a contract basis, con- tracts being let to individuals for the period of 1 year. To facilitate water transportation to the nearby islands which absorbed the total collec- tions, a storage point was established at a wharf near Bridge 17, where excrement was allowed to ferment in tanks for approximately 30 days before 275 it was sold. Costs were based on a 72-liter meas- ure and all payments by farmers and residents were made to the city government. The average monthly collection was approximately 130,000 liters. Inasmuch as the remaining 30 percent of the city zoned for collections was on the outskirts, the farmers in the vicinity of Hiroshima made their own collections and were paid the established collection rate of 30 sen per 72 liters, c. The heaviest rainfalls occurred during the typhoon season from June through October, the highest recorded being 7.87 inches per hour on 17 September 1945. The rainfall for which provision was made in design however, was approximately 2.36 inches per hour. The system was built to accommodate as an additional load the residential waste water referred to in Paragraph 2a, all mains and open flumes serving the dual purpose of sani- tary and storm sewers. The water impounded by open flumes and catch basins flowed through mains and open flumes, as indicated on Figures 45 and 46, directly into the rivers or the bays from high points located approximately on the longitudinal center lines of the islands formed by the rivers. In the event high river waters resulted from rains or tides, pumping stations located at strategic points (Fig. 45) discharged waters into rivers or the bay. d. The pumping stations were made necessary by the flood stages of the rivers which frequently rose to within 1 foot of the tops of the revetments along the river banks (Photo 147) and occasionally overflowed some portions of the banks through a combination of flood and tide. This overflow, however, was rarely sufficient to cause damage. e. The sewage pumping stations were divided into two types; Those operated by electric power, and those operated by producer fuel. The power for the electrically operated stations was supplied to the city of Hiroshima by the Chugoku Electric Co. (a subsidiary of the Nippon Electric Co.), and was transformed from 3,300 volts down to operat- ing voltages. The stations operated by producer gas generated the fuel at each individual station by heating coal or wood in air-tight containers to temperatures required to drive off the gas. The engines were 2- and 4-cycle, magneto-ignited, horizontal type, manufactured by the Osaka Co., Osaka. The location (Fig. 45), type and output of each station are listed on Table 33. /. A total of 930 cubic feet per second was dis- charged by the above stations operating under normal conditions. Each station that was pro- Table 33.—Pumping stations Station No. Type Grid No. Horse- power, each motor Num- ber of pumps Total dis- charge (cubie feet peTA) second 1 Electric motor 7M 30 1 10 2 Gas-fuel engine 5L 60 2 1)0 3 . _ do , . . _ 7L 30 3 4 do 8J 60 3 90 5 Electric motor 91 150 3 180 6 do 41 60 1 24 7 do 61 60 1 24 8 Gas-fuel engine 7H 100 3 150 9 do 4G 30 2 2b 10 Electric motor 4G 60 1 24 11 do 4G 60 1 24 12 do 7D 100 3 120 13 do 7C 100 3 120 14 do 5G 60 1 24 vided with a tide gate (Fig. 45) operated whe*1 the tide or river was too high to permit direct to open water. The remaining stations were pi’0' vided with flood gates and pumps at sewer-ma11 terminals from which the water was pumped when the tide water or flood water had risen too hig° for normal flow to the river. Other gates, in add1' tion to those at the stations, were provided to pi‘e' vent backflow during high water. All gates, eithe1 tide or flood, were manually operated and each station had its individual operator to keep the riSe of waters in the mains and open flumes under coH' trol. With the exception of the pumps at 15, 12, and 13 (deep-well type, manufactured h} Hitachi Co., Tokyo), all pumps were of the rotary' centrifugal type, manufactured by the Torishimil Pump Co., Osaka, and could operate against maximum head of approximately 12 feet. rlbe majority of the electric-motor-driven pumps wei’e direct connected, while the gas-fuel-engine-oper' ated pumps were belt driven. All stations wer° housed in light-frame buildings, the majority 0 which had interior plastered walls, but the others had exposed studding. Lighting fixtures were pr°' vided for some fuel-gas-operated stations. Table 34 gives the classifications of all buildings. • ll g. Pipe Lines. The practice of carrying 111 waste water and storm water by a single h*1® greatly simplified the piping system. Because the absence of excreta it was unnecessary to pr°' vide special construction and materials in the mains and branches to prevent early decay of age lines or the escape of excess sewer gas, Tbe 276 HIROSHIMA SANITARY a STORM SEWER SYSTEM LEGEND PUMPING STATION (WITH GATE IF NOTED) GATE (TIDE AND FLOOD) OP JAPANESE DESIGNATION FOR OPEN FLUME S.C. JAPANESE DESIGNATION FOR CLAY PIPE C.P JAPANESE DESIGNATION FOR REINFORCED- CONCRETE PIPE C.C JAPANESE DESIGNATION FOR CONCRETE BOX PIPE WITH REMOVEABLE TOP HIROSHIMA HIROSHIMA PREFECTURE, HONSHU, JAPAN CONTOUR INTERVAL 20 METERS GRID SYSTEM BASED ON 1000 YARD WORLD POLYCONIC GRID SECRET U S. STRATEGIC BOMBING SURVEY SEWER SYSTEM HIROSHIMA, JAPAN FIGURE 45 XIII 731568 0 - 47 (Face p. 276) SECRET TYPICAL SECTION TYPICAL SECTION STONE CONCRETE OPEN FLUME OPEN FLUME TYPICAL SECTION REINFORCED-CONCRETE STANDARD BRICK BOX PIPE MANHOLE SECRET NOT TO SCALE J.S STRATEGIC BOMBING SURVEY SEWER DETAILS HIROSHIMA, JAPAN FIGURE 46 BE 277 PHOTO 134-XIII. Aerial photo showing open ditches and dikes at Sewer Pump Station 4, 11,100 feet from GZ. 278 Table 34-XIII.—Hiroshima sanitary and storm sewer system—building data [Areas in thousands of square feet] Build- ing Grid Usage Type Plan area Sto- ries Build- ing HE- V Build- ing Fire- V Dis- tance AZ (feet) Total floor area Buiding damage (floor area) Equipment damage Structural damage Superficial damage Minor damage Per- cent Cause Blast Fire Mixed Blast Fire 1 7M Pump station D 0.2 i V4 C 17,000 0.2 Slight 25 Debris. 2 5L do_ _ 11 1.2 i V4 c 13,300 1.2 1.2 10 Do. 3 7L do D 1.2 i V4 c 14,100 1.2 Moderate.. 4 8J do . D 1.2 i V4 c 11,300 1.2 do 5 Do. 5 91 do D 1.1 i V4 c 13,400 1.1 do 25 Do. 6 41 do D .3 i V4 c 5,400 .3 0.3 75 Fire. 7 61 .....do D .3 i V4 c 5,600 .3 .3 75 Do. 8 7H do D .9 i V4 c 7,200 .9 0.9 10 Debris. 9 40 do D .4 i V4 c 2,600 .4 .4 75 Fire. 10 40 do D .4 i V4 c 3,900 .4 .4 75 Do. 40 D .8 i V4 c 3,700 .8 .8 45 Blast. 12 7D do D .8 i V4 c 11,800 .8 Severe 10 Blast and debris. 13 7C do D .8 i V4 c 14,900 .8 Slight 5 Blast. 14 50 do D .3 i V4 c 3,300 .3 .3 75 Fire. Table 35.—Flumes and mains Diameter or width (feet) Open flume length OP i Clay pipe length SC 2 (feet) Concrete pipe length CP 3 (feet) Concrete-box pipe length CC 4 (feet) 26 33 10 900 IQ 7^ 1 100 13 25 21 460 1125 800 10 00 16 970 9 00 9 000 8. 25 6. 50 6. 00 5. 00 4. 00 3. 33 2. 50 6, 030 6, 000 48, 000 27, 830 33, 270 30, 570 4, 670 5, 830 7, 940 26, 070 3, 170 5, 330 15, 770 14, 130 1, 640 470 Depths, being variable, are not given and will be fount} on tie 15 1 OP—Japanese designation for open flume. 2 SC—Japanese designation for clay pipe. 2 CP—Japanese designation for reinforced-concrete pipe. 4 CC—Japanese designation for reinforccd-concrete-box pipe with remov able top. . Pipe diameters and wall thicknesses for clay and reinforced-concrete pipe were given as follows: (1) Clay pipe, bell, and spigot, 2-inch wall, 48-inch diameter. (2) Concrete pipe, reinforced, bell, and spigot, 2-inch wall, 48-mch and 30- inch diameter. Fig. 46, gives open-flume and reinforccd-concrete-box pipe dimensions. mean-low-water level of the river, rarely exceeded 10 feet below ground elevation. i. All lines and mains were traced by the city engineer’s office by field check and memory due to the destruction of records in the city hall. 3. Analysis of Damage a. The greatest amount of damage to building and contents in any pumping station was caused by fire. The damage to the equipment incurred by blast was in most instances negligible. With the exception of Station 11, all stations within a radius of 5,200 feet of ground zero were destroyed by fire. Station 11 and the remaining pumping stations were damaged by blast in a degree propor- tionate to their distance from GZ. Table 86 cites the damage to equipment resulting from blast and subsequent fires. b. It will be noted that the electric-motor dam- age of Stations 1 (Photo 135) and 5 is classified as heavy, the cause being that plaster and debris fell in the motor rotors while in operation, resulting in a severe short circuit and burning of the coils. Stations 12 (Photo 186) and 18, damaged by blast, suffered small-panel and incidental-equipment damage, insufficient to prevent operations. Since Station 12 was under construction and all equip- ment was not installed, however, it was not con- sidered as being in operative condition. The equipment in the four electrically operated stations (6, 7, 10, and II) which were damaged by fire (Photos 187, 188, and 189) was rendered totally useless as was that in gas-fuel-operated Station 9 ( Photo 110). The operational value of the pumps in the fire-damaged stations was rendered negli- minimum earth cover for all pipe was 8 feet. 1 he types of mains and open flumes (lig- 4o) are de- tailed on Figure 46. The summary of types of mains and open flumes is shown in I able 85. h. Access to Pipe. Manholes were installed at important intersections and at changes in direc- tion. AIT manholes (Fig. 46) were constructed of a 2-course brick wall and a concrete foundation. The flow-line elevation, being dependent on the 279 Station Grid Distance from GZ (feet) Typo of damage Engines motors Pumps Distribution panels Transformers 1 7M 16, 900 Blast Heavy damage None None None. 2 5L 13, 200 do-.. Slight damage do ..do Do. 3 7L 14, 000 do None do 4 8.1 11, 100 -do__. do,__ _ _do _ 5 91 13, 300 do Heavy damage do None Do. 6 41 5, 000 Fire do Heavy damage Total damage Heavy damage. 7 61 5, 200 do_- -do_- do do Do. 8 7H 6, 900 Blast Slight damage None None 9 4G 1, 900 Fire Heavy damage Heavy damage 10 4G 3, 300 do do- do Total damage Do. 11 4G 3, 100 Blast Slight damage Slight damage. Slight damage None. 12 7D 11,600 do None None do Do. 13 7C 14, 800 do do .do do . Do. 14 5G 2, 800 Fire _ Heavy damage Heavy damage Total damage Heavy damage. Table 36.—Damage to pumping station and equipment gible becaused of burned packing, fused bearings, and distorted shafting. As expressed above, the greatest damage incurred was by the fires as an indirect effect of the atomic-bomb explosion. With the exception of Station 11 (Photo 141) in which the electric panel and transformers were severely damaged by blast, all other stations suf- fered relatively light blast damage (Photos 142, 143, and 144), except stations 1 (Photo 135) and 5 which were previously discussed. Station 11 (Photo 141), although in a fire area, was an iso- lated case, being in a sparsely settled district. c. Operation after the Attack. Gates control- ling the gravity flow of water to the rivers or bay areas were undamaged (Photo 145) and, outside of being somewhat weathered, were considered oper- ative. Prior to the attack there was little precipi- tation and only the pumping stations at the far ends of the deltas were operating to keep drainage waters in the open flumes at a safe level during high-tide periods. Subsequent to the attack, however, none of the pumping stations were oper- ative because of (1) damages to the equipment in the pumping stations; (2) lack of competentoper- ators, repair personnel and facilities; and (3) lack of electric power to operate electric motors in pumping stations because of damaged electric substations. Since the weather was fair at that time there was no danger of inundation, and equip- ment repairs could have been made in a few hours to those stations which had suffered only minor damage and were outside of a radius of 5,200 feet from GZ. Only small amounts of material would have been required for that purpose. Although the electric substations in the vicinity of these pumping stations were in operation prior to 20 August 1945, little or no effort was expended in making repairs or placing the sewer system in operation. d. In addition to direct and indirect bomb dam- age, exposure to the elements contributed to the deterioration of otherwise operative equipment. During the September 1945 heavy rains which reached an all-time record high of 7.87 inches per hour, the loss of the system was greatly felt. The high water in the rivers forming the deltas pre- vented the escape of surface waters flowing through the mains, while the gates at the terminals of the open flumes could be opened only when the water was low. Thus at high tide the lowlands behind the revetments were inundated, the water rising to approximately 1 foot below the top of the gates. The run-off in the city center was greatly hampered. To make the problem more complex, the water table rose to within approximately 3 feet of ground elevation in the normally dry man- holes of other utilities (Part D of this section), thereby greatly handicapping repair efforts. This condition was made worse by the fact that the subsurface area was reclaimed river sand and very porous. e. Of the 14 frame structures erected to house the pumping equipment, five were damaged by fires (Photos 137, 139, and 140) and 9 were dam- aged by blast (Photos 141,146,147, 148, and 149). Table 35 gives the extent of damage to all pump station buildings. The wood-frame type structures constructed for the pumping stations were typical Japanese construction and could be readily re- placed if damaged. 280 PHOTO 135-XIII. Equipment for Sewer Pumping Station 1. Motor damaged by debris, 16,900 feet from GZ. PHOTO 136-XIII. Damaged equipment in sewer pumping station which was 11,600 feet from GZ. 281 PHOTO 137-XI1I. Fire Damage to Sewer Pumping Station 7, located 5,200 feet from GZ, PHOTO 138-X1II. Pump outlet and gravity flow outlet at Sewer Pumping Station 7, located 5,200 feet from GZ. 282 PHOTO 139-XI1I. Fire damage to Sewer Pumping Station 14, situated 2,800 feet from GZ. PHOTO 140-XIII. Fire damage to Sewer Pumping Station 9, situated 1,900 feet from GZ. 731568—47 19 283 PHOTO 141 XIII. Blast damage to Sewer Pumping Station 11, located 3,100 feet from GZ. PHOTO 142-XIII. Blast damage to Sewer Pumping Station 8, located 6,900 feet from GZ. 284 PHOTO 143-XIII. Undamaged equipment in Sewer Pumping Station 3, situated 14,000 feet from GZ. PHOTO 144-XIII. Equipment in Sewer Pumping Station 4, situated 11,100 feet from GZ. 285 PHOTO 145-XIII. Undamaged gate at Sewer Pumping Station 8. PHOTO 146-XIII. Sewer Pumping Station 1 showing minor blast damage. 286 /, There was no evidence of direct bomb damage to sewer mains (Photo 150), although the nearest reinforced-concrete-box main, 4.5 feet by 3.3 feet with a 3-foot earth cover, was only 2,100 feet from GZ. The city engineer stated that up to 15 Novem- ber 1945 no breaks had been discovered. The open flumes (Photo 151) and ditches (Photo 152) were not damaged but were in some instances partly filled with mud and rubble. Of all the manholes observed not one was overflowing, a condition which would have indicated the presence of broken or crushed mains. g. The city engineers at Hiroshima estimated the total cost of damage to the sanitary and storm sewer system at approximately 3,000,000 yen as of 15 November 1945, or $750,000 at the exchange ratio of 4 yen to a dollar. 4. Recommendations and Conclusions a. Because Hiroshima was built upon a delta of artificially reclaimed land, separated into islands by the fast-rising rivers branching from the Ota River, it was necessary to supplement the natural run-off by a system of pumping stations to accom- modate the 2.36-inch-per-hour rainfall. Prior to the atomic-bomb attack the sanitary and storm sewer system, of which the pumping stations were a part, had been adequate, since the system had always remained operative. Damage to plants and equipment, principally pumping stations, re- sulting from the 6 August 1945 attack, reduced the capacity of the system below the requirements of the heavy rainfall of 17 September 1945. Any city such as Hiroshima built on delta land and maintaining revetments which require the use of pumping stations for storm water and sewage dis- posal would be flooded by an atomic-bomb attack unless proper protection for pumping stations and mains were incorporated in its planning and con- struction. I). The majority of the pumping stations were 'veil designed and maintained, but were not all adequately electrified. Since, however, this attack damaged equipment heavily within a radius of 5,200 feet from GZ, improved electrification prob- ably would not have altered the results in this area and stand-by units would have served no useful purpose. Outside this area, the pumping equip- ment, in general, withstood the attack. c. There was no damage to the concrete or clay pipes, which indicated that the mains were of suffi- cient strength. Open flumes were also undam- aged. Penetrating bombs could undoubtedly damage some portions of subsurface mains, but this would depend on the penetration depth, the natural slope, and type of cover. Open flumes, however, would be extremely difficult to put out of service. d. Buildings housing the equipment were flimsy and none too well constructed. If the buildings had been constructed of reinforced concrete, much of the equipment damage resulting from the attack would not have occurred. The best method of construction for protection against an attack of this nature would he the subsurface-vault type which would have protected against both direct blast and fire damage. With equipment housed in such structures the resumption of operations would be largely dependent upon the availability of power. G. DOMESTIC GAS SYSTEM 1. Summary a. Production. Approximately 75 percent of the residences in Hiroshima used 1,125,000 cubic feet of producer gas per day. The heat content was maintained at 404 B. t. u. per cubic foot of gas. h. Equipment. The producer plant was de- signed by the Japanese and laid out as shown on Figure 48. Equipment installed was of domestic and foreign manufacture. The high-pressure sys- tem was developed by pumping from storage into the mains. Gas was introduced into the low-pres- sure system from storage through a station regulator. c. Piping. High-pressure mains were cast-iron, screwed pipe, and low-pressure mains were cast- iron, bell and spigot, lead-caulked pipes. Pres- sures of 6 to 8 pounds per square inch were main- tained in the high-pressure mains and 6 to 8 inches of water in the low-pressure mains. All piping was buried 4 feet below ground elevation. d. Valves. Valves were sparsely used through- out the system. Pressure reducers were valved be- tween high- and low-pressure mains, and the mains were valved at the producer plants. e. Bridge Crossings. There were 27 bridge crossings necessary to carry the mains across the rivers to the various islands. /. Pressure Regulators. Pressure regulators were used to reduce pressure from 6 to 8 pounds per square inch in the high-pressure mains and to fi to 8 inches of water in the low-pressure mains. Gas was introduced into the low-pressure mains at this point to restore pressure losses caused by friction and consumer loss. 287 PHOTO 147-XIII. Blast damage to Sewer Pumping Station 3, located 14,000 feet from GZ. PHOTO 148-XIII. Blast damage to Sewer Pumping Station 12, located 11,600 feet from GZ. 288 PHOTO 149-XIII. Blast damage to Sewer Pumping Station 4, located 11,100 feet from GZ. PHOTO 150-XIII. Pump outlet and gravity flow outlet at Sewer Pumping Station 6, located 5,000 feet from GZ. 289 PHOTO 151- XIII. Typical masonry open-flume and concrete road crossing, 7,200 feet from GZ. PHOTO 152-XIIT. Rubble-and-debris-filled concrete drainage ditch, 1,200 feet from GZ. 290 g. Damage to Equipment and Buildings. Total equipment damage by blast was slight. The elec- trical switchboard and recording meters were heavily damaged, but no other equipment was damaged. Gas storage was damaged when the crowns of the holders were torn by the direct effect of the blast, releasing all the gas which ignited. The tii •es that followed burned timber structures but no additional equipment damage was sus- tained. The electrical substation supplying this area was also damaged. The buildings (Fig. 48) in this section are tabulated as Building 112 by the Building Damage Section. Any conclusions drawn for the mean areas of effectiveness by the Building Damage Section for buildings and equipment will also apply to this Section. h. Damage to Piping and Overcrossings. There was no apparent damage to the high- or low-pres- sure mains. Damage occurred to branches leading to buildings or dwellings where those structures were damaged. Of the 27 bridges serving as river crossings, four were damaged by blast and fire, and eight by floods. The extent and nature of this damage are found in Table 41. The bridges in this section are listed by number in the Bridge Damage Section and any conclusions for mean areas of effectiveness for bridges drawn by the Bridge Damage Section will also apply to this section. i. Damage to Pressure Regulators. Of the pressure regulators installed in the system, two were heavily damaged by blast and fire, the great- est distance from GZ being 1,700 feet. This does not establish the limit of effectiveness, since the low-pressure mains served by the reducers would be affected in a degree proportionate to the damage to the reducers. j. Cost of Damage. The estimated cost of re- pair and replacement was 300,000 yen, or $75,000 at the exchange rate of 4 yen to a dollar. 2. Description of System a. The location of the producer plant and its connecting high- and low-pressure mains which supplied the cify of Hiroshima and its environs are shown on Figure 47. I). The producer gas was manufactured from hard coal, the bulk of it being shipped by rail to Hiroshima from the Chugoku district where Ube Was a distribution point. Approximately 75 per- cent of the residences used gas for cooking and, in some instances, for heating. There was no indus- trial use of gas, coal being the main fuel for heat and power, but coke produced as a byproduct was used both by industrial plants and residences. The maximum capacity of the gas producer plant was approximately 1,126,000 cubic feet per 8-hour day, storage being in 2 holders having capacities of 316,000 cubic feet and 211,000 cubic feet, respec- tively. The heat content of the gas produced was maintained at 401 B. t. n. per cubic foot. The dis- tribution system was divided into high- and low- pressure mains which carried the gas into and across the city, and also to the small district of Koi where the system ended. All pressure reductions were effected by means of pressure reducers. The fuel was then transferred through low-pressure mains to consumers. c. The producer plant of the Hiroshima Gas Co., as indicated by Figure 48. covered approximately 2.7 acres, and included all buildings and equip- ment necessary for the production of domestic gas. The buildings within the plant area are covered in the Building Damage Section and are designated as Building 112 in that section. The plant was of Japanese design, but had both do- mestic- and foreign-equipment installations. All piping within the plant was of cast-iron, screwed pipe with flange and bolt connections. The gas holders, as indicated on Figure 49, were of the two- lift type, capable of withstanding 8 inches of water pressure. The crown of each holder was con- structed in pie-shaped segments, without subcrown bracing. Rolled I-beams and framing acted as guides for rollers on each holder to keep the lifts in position. Adjustable rollers maintained free vertical movement of lifts. All joints on the holders were lapped and riveted. As shown on Figure 48, both high- and low-pressure systems started from the producer plant. In the high- pressure system gas was taken from the holders at 8 inches of water and pumped into the mains at a pressure of 6 to 8 pounds per square inch. Gas was introduced into the low-pressure mains from the holders through a station regulator of the Elester type (Fig. 50) maintaining a pressure of 6 to 8 inches of water. All gas taken from the holders was measured by flow meters before being fed into the mains. d. The high-pressure mains were cast-iron, screwed pipe and low-pressure mains were cast- iron, bell and spigot pipe with lead-caulked joints. At bridge crossings screwed pipe with flange and bolt connections was used. Expansion joints were introduced at these points to allow for expansion 291 BELL AND SPIGOT JOINTS HIROSHIMA DOMESTIC GAS SYSTEM LEGEND HIGH PRESSURE PIPE (6-8 LB/SQ IN) — 4", 6", 8 8" LOW PRESSURE PIPE (3 LB/SQ IN) —— 8", 10", 12", 14", a 16" ——- 3", 4", a 6“ ® PRESSURE REGULATOR HIROSHIMA HIROSHIMA PREFECTURE, HONSHU, JAPAN CONTOUR INTERVAL 20 METER* GRID SYSTEM BASED ON 1000 YARD WORLD POLYCONIC GRID SECRET US STRATEGIC BOMBING SURVEY DOMESTIC GAS SYSTEM HIROSHIMA, JAPAN FIGURE 47-Xm 731568 0 - 47 (Face p. 292) No. 1 SECRET LEGEND STRUCTURAL DAMAGE BY BLAST SUPERFICIAL DAMAGE BY BLAST STRUCTURAL DAMAGE BY BLAST AND FIRE PLOT PLAN SHOWING DAMAGE SECRET US. STRATEGIC BOMBING SURVEY HIROSHIMA GAS COMPANY HIROSHIMA, JAPAN FIGURE 48-2m 131568 0 - 41 (Face p. 292) No. 2 SECRET SECRET GAS HOLDER U S STRATEGIC BOMBING SURVEY HIROSHIMA GAS COMPANY HIROSHIMA, JAPAN. FIGURE 49 XTH 293 SECRET STATION GAS REGULATOR SECRET U.S. STRATEGIC BOMBING SURVEY HIROSHIMA GAS COMPANY HIROSHIMA,JAPAN FIGURE 50 XDI 294 and contraction with changes in temperature. Table 37 gives the dimensions for bell and spigot pipe used by the company. For details see Figure 47. Table 39.—Gas main overcrossings Size of pipe (inches) Num- Bridge Bridge Grid Type ber of length spans (feet) High Low pres- pres- sure sure 5 5J 5 204 8 7 41 do 8 288 4 8 41 do 13 518 6 10 31 7 307 6 12 61 3 208 8 13A 51 9 307 12 15 61 do 15 309 12 16 61 Concrete 7 367 4 17 7H Plate girder _ 9 540 6 10 18 70 Timber _ . 16 448 6 19 60 Concrete 7 259 6 21A 5H Timber . 9 270 6 12 22 5H Plate girder . 3 164 8 24 4Q-H do 7 398 8 25 3H Concrete ... 14 560 6 27 30 Steel arch. 1 200 8 28 30 Timber 6 197 4 29 50 Pin truss.-- . . 3 263 12 30 50 Concrete 7 340 6 12 31 60 do 12 358 6 33 6F do 12 410 6 35 50 Plate girder 8 264 4 37 50 4 169 10 43 4F 16 410 8 44 4F Steel I-beam ----- _ 14 476 4 47 4E do 10 340 4 48 4E Plate girder. _ . 4 240 4 Data for the above bridges are taken from the Bridge Damage Section. Table 37.—Dimensions of cast-iron, bell-and-sptgot pipe Diam- eter (inches) A B C D E F G H T t 3 3 3 H 7A H 'H« 96 H H 96 4 3 3 V* 7A H 'He 96 H Hi 96 6 3 H 3H H A H 'He 'He 7A 96 He 8 4 4 3A m A 'He 'He 7A A H 10... 4 4 H m H 'He 'He H 96 He 12 4 4 H 1H A 'He 'He m H % 14 m 4 H H 'He 'He 'He 1H % 'He 16 4 Vi 41/2 H m 'He 'He 'He 1H % Standard length of each size of cast-iron pipe was 9 feet. e. Very few valves were employed in either the high- or low-pressure systems. They were used only at the pressure reducers and at the producer plant where the high- and low-pressure systems were valved as a maintenance measure. The ap- proximate depth of placement of all pipe was 4 feet below ground elevation; it emerged only at river crossings or at reducers. Table 38 is a tabu- lation of all high- and low-pressure pipes as indi- cated on Figure 47. g. In order to keep the pressures in the low- pressure mains from being absorbed by friction and consumer loss, pressure regulators as shown on Figure 47 were inserted to transfer gas from the high-pressure mains. Gas at 6 to 8 pounds per square inch in the high-pressure mains was re- duced to 8 inches of water for consumer distribu- tion. This equipment was manufactured by the Reynolds Gas Regulation Co., of Anderson, Ind. (Fig. 51). 3. Analysis of Damage a. At the time of the atomic-bomb attack of 6 August 1945, the domestic gas plant of the Hiro- shima Gas Co., at a distance of 6,700 feet from GZ, was producing at its maximum capacity. Initial damage by blast to operating equipment was slight (Photo 153). The electrical distribution panel in the pumping station received heavy dam- age to the wiring and meters (Photo 154). The station recording meters were also heavily dam- aged, Replacements of parts were necessary to Table 38.—High- and low-pressure piping Diameter (inches) High-pres- sure, east- iron, screwed pipe (feet) Low-pressure, cast-iron, bell-spigot pipe (feet) 16 9, 900 1, 600 23, 100 6, 600 42, 900 47, 000 94, 000 3, 500 14 12 10 8 ___ 3, 300 13, 200 16, 500 33, 000 6 4 3 /. Twenty-seven bridges were used as overcross- ings for domestic gas lines, only bridges owned and maintained by the city or the prefectural government being used, with the exception of Bridge 21A which was maintained by the company. Table 39 gives the bridges used as overcrossings for gas mains as shown on Figure 47. 295 SECRET REYNOLDS GAS REGULATOR CO. ANDERSON, IND.,USA GAS SYSTEM REGULATOR SECRET U.S. STRATEGIC BOMBING SURVEY HIROSHIMA GAS COMPANY HIROSHIMA, JAPAN FIGURE 51 XOI 296 make this equipment operative. The gas holders, however, were more severely damaged (Photo 155). The bolder crowns were depressed by the blast (Photo 156) and the downward vertical movement of the lifts compressed the gas suffi- ciently to build a pressure that tore the already weakened riveted joints when the pressure from the blast front was released, which allowed the gas to escape. There was an immediate ignition but no explosion, and all the escaping gas was con- sumed by fire. Since no gas pressure remained to hold the two lifts of each holder above the water elevations of the water receptacles, both lifts of each holder dropped to the floor elevation of the water receptacle. Framing members, however, were undamaged. All operations in the produc- tion plant stopped immediately. Three hours subsequent to the blast, fires were started in the plant area, having been driven to the vicinity by a south wind. Because of the immediate drop in water pressure and the lack of electricity to oper- ate the auxiliary water pumps, no effort could be made to extinguish the fires. The Sendamachi electric substation in this area was damaged and electric power was interrupted. No additional damage to the equipment by fire was noted. h. Flash burns affecting the bituminous paint on the gas holders (Photo 157) were visible on the sides of holders toward the blast. The structural members and other obstructions protecting the paint from the flash are outlined on the holders, and were easily distinguished. c. The damage to the gas holders was insufficient to halt operations because the producing plant could operate until facilities could be repaired by pumping gas directly into the lines without the benefit of storage, and the small repairs to the collateral equipment required a minimum of time and materials, which would permit the plant to operate at its rated capacity. Company officials stated that after small equipment repairs, opera- tions would begin early in 1946 by pumping directly into the lines. This statement did not seem unreasonable after inspection of the plant. Figure 48 shows the damage to company buildings caused by blast and fire. cI, An examination by the company indicated no breaks in the mains, but since no gas was available a pressure test was not made to test for leaks in the lead joints. Approximately 75 percent of the branches from the mains to dwellings and build- ings were damaged when those structures suffered damage by blast and fire. e. As reported by the bridge damage section of this survey a number of bridges were damaged by blast, fire (Photos *99, #130, 158, and 159) and flood (Photos *102 and 160). (Refer to Parts D and E of Sec. XIII for explanation of * and #.) Inasmuch as these bridges served as overcrossings for utilities, gas flow was rendered impossible by their damage or destruction. Since the floods of 17 September and 5 October 1945 occurred sub- sequent to the atomic-bomb attack, damage at- tributed to the floods is mentioned to give a com- plete history. Table 40 is a tabulation of damage to bridges serving as overcrossings for the gas dis- tribution system (Fig. 47) as taken from the bridge damage section of this report. /. Because of the loss of whole sections of mains, both high- and low-pressure type, due to loss of bridges, districts served by these overcrossings will continue to be cut off entirely until bypasses are made. In the event it were possible to operate the producing plant such operations would be greatly reduced because of the number of bridges damaged or destroyed as a direct or indirect result of the attack. g. In tracing the possible bypasses (Fig. 47 and Table 41) required to operate the system, the 12- incb crossing at Bridge 13A (Photo #130) could be eliminated since 8- and 12-incb low-pressure mains on Bridges 12 and 15 in the immediate vicinity were available. However, the breaks in the 6-incb high-pressure main and the 12-incb low-pressure main at Bridge 21A (Photo 158) con- stituted a serious problem. The 6-inch high-pres- sure main over this bridge provided sufficient pressure to overcome friction losses in the low- pressure mains and bypasses within that area. The 6- and 8-incb low-pressure mains over Bridges 19, 22, and 24 might have been sufficient to provide the necessary gas required for the area west of the Motoyasu River bad not the 12-incb low-pres- sure main on Bridge 29 (Photo 159) been also dam- aged. This area was cut off entirely, and unless temporary structures were erected to provide an overcrossing for at least the 6-incb high-pressure main, very little gas would be available to the area west of the Motoyasu River. The break in the 8-inch low-pressure main over Bridge 43 (Photo #130) would be negligible because there was no high-pressure supply. However, since no valves were installed in this system any attempt to bypass 297 PHOTO 153-XIII. Damage by blast to coking ovens at the Domestic Gas Plant, 6,700 feet from GZ. PHOTO 154-XIII. Damage to electrical switchboard panel in Building 112, 6,700 feet from GZ. 298 PHOTO 155-XIII. Fire and blast damage to gas holders and buildings, 6,500 feet from GZ. PHOTO 156-XIII. Crown of holder depressed by blast and section raised by compressed gas, 6,500 feet from GZ. 731568—47——20 299 PHOTO 157-XIII. Flash burns on gas holder 6,500 feet from GZ. Note shadow of office building on holder. 300 Table 40.—Damage to overcrossings Bridge Type Length (feet) Distance from GZ Size of pipe (inches) Damage Extent High pressure Low pressure 5 Concrete 204 6, 200 8 None 7 do 288 5, 200 4 do 8 do 518 5, 400 6 do^ 10 do 307 7, 000 6 Flood Moderate. 12 Plate girder 208 4, 700 8 None ISA Timber ...... 307 4, 700 12 Blast and fire Complete destruction. 15 do 309 4, 700 12 None 16 Concrete 367 5, 800 4 do 17 Plate girder 540 7, 600 6 10 do 18 Timber 448 6, 000 6 do 19 Concrete 259 4, 300 6 do 21A Timber. 270 1, 200 6 12 Blast and flood Do. 22 Plate girder 164 260 8 None 24 do 398 1, 000 8 Blast Slight. 25 Concrete 560 5, 200 6 Flood ... . Moderate. 27 Steel arch 200 4, 400 8 None 28 Timber 197 4, 400 4 Flood . Complete destruction. 29 Pin truss 263 1, 200 12 Blast Do. 30 Concrete 340 1, 900 6 12 Flood Severe. 31 do 358 4, 600 6 do Do. 33 .. . do 410 5, 300 6 do Do. 35 Plate girder 264 3, 200 4 _do Complete destruction. 37 do 169 3, 200 10 do Severe. 43 Timber 410 5, 200 8 Blast and fire Complete destruction. 44 Steel I-beam 476 5, 300 4 None 47 do 340 7, 500 4 do . 48 Plate girder 240 7, 100 4 do would necessitate the installation of valves to ac- commodate each bypass. The floods of 17 Sep- tember and 5 October 1945 totally or heavily damaged other bridges (Photos *102 and 160) as was previously shown and presented additional difficulties since they also served as utility over- crossings. h. Pressure regulators in the distribution sys- tem located on Figure 47 wejje damaged (Table 41) as follows: Only a small amount of damage was incurred by blast and that was by flying debris. Both regula- tors, however, w ere rendered useless. No damage w as visible to Regulators 3 and 4 and no breaks or damages to piping noted at these points of exit. i. The estimated cost of repair and replacements of equipment and material by the company as of 15 November 1945 was 300,000 yen or $75,000 at the rate of 4 yen to a dollar. 4. Recommendations and Conclusions a. The gas producing plant, although 6,700 feet from GZ, received sufficient equipment damage to halt production of domestic gas. The w’eak point in the system was the electrical distribution panel. The metering system and gas holders, not being essential to production, could be bypassed until repairs were effected. It can be concluded that a well protected electrical distribution panel would eliminate this w’eak point and, upon resumption of electrical power supply, the gas plant, with by- passes and few7 repairs would be in operation. Pres- sure reg- ulator Distance from GZ (feet) Type Damage extent 1 700 Blast and fire_ Heavy. 2 1, 700 do Do. 3 7, 600 None 4 10, 700 do Table 41.—Regulator damage The greatest damage to Regulators 1 (Photo 163) and 2 (Photo 164) was distortion to the balancing mechanism and freezing of the valves by fire. 301 PHOTO 159-XIII. Broken gas main at Bridge 29. Over-crossing structurally damaged by blast, 1,200 feet from GZ. PHOTO 160-XIII. Bridge 30, carrying 6-inch, high-pressure and 12-inch, low-pressure gas mains, damaged by flood. Aqueduct 30A in background, 1,900 feet from GZ. 303 PHOTO 158-XIII. Damaged gas-main supports at Bridge 21A, 1,200 feet from GZ. 302 PHOTO 161-XIII. Bridge 27 carrying 8-inch, low-pressure gas main, undamaged, 4,400 feet from GZ. PHOTO 162-XIII. Undamaged Bridge 47 carrying 4-inch, high-pressure gas main, 7,500 feet from GZ. 304 PHOTO 163-XIII. Pressure Regulator 1 damaged by debris and fire, 800 feet from GZ. PHOTO 164-XIII. Pressure Regulator 2 damaged by debris and fire, 1,800 feet from GZ. 305 h. There was no damage to the cast-iron, screwed or bell and spigot pipe buried at 4 feet below ground elevation. The damage, however, to the dwellings and buildings to which the pipes were extended, damaged the gas branches. Because of the vulnerability of the dwellings and buildings, this damage would occur regardless of locality. But an efficient cut-off system for each branch from the main would aid in maintaining main pressures and reduce the loss of gas until branches above ground were repaired. c. Because of the islands on which Hiroshima was built, numerous bridges were necessary to keep communications open. The domestic gas mains were dependent on these bridges as over- crossings, and the failure of any bridge acting as an overcrossing might also mean the failure of part of the system. If a high-pressure main were being carried, the whole system beyond that point would be out of service. This would be true where the attack damaged bridges carrying a 12-inch low-pressure main and a 6-inch high-pressure main. The area beyond those points could not be served by low-pressure pipes because of pressure losses. But subriver crossings would eliminate these hazards and should be utilized as much as possible to minimize the damage from similar attacks. d. Pressure regulators converted high pressure to low pressure for consumer distribution. The damage received by regulator 2 at 1,700 feet from GZ did not confine the limit of effective damage solely to its area for these reasons: (1) Damage was such that no gas could flow and the area was cut off in proportion to the distance to the next regulator, depending on a loop system being in the area, or (2) the pressure in the high- and low- pressure systems was equalized, creating a danger- ous situation for consumers. In order to protect the regulators against damage from similar at- tacks a good solution would be to install them in rein forced-concrete manholes constructed below ground elevation. 306 SECTION XIV DAMAGE TO STACKS Page Summary 308 Lay-out and construction 308 Analysis of damage 309 Recommendations and conclusions 309 Photos 1-22, inclusive. Figure 1. Table 1. 307 sampling of the area. The method employed was to compile data on stacks selected for study on the basis of location, type, and degree of damage, in order that accumulated data might represent a fair sampling of all the stacks. Proceeding clock- wise around GZ, 16 stacks were selected from the northeast quadrant of the city, 23 from the south- east, 14 from the southwest, and 13 from the north- west. The stacks were distributed over the quadrants and extended 8,700 feet from GZ, beyond which no further damage was encountered. c. Functions. Most of the stacks in the blast area had served small industry and public build- ings. Large stacks serving heavy industry, which was not very prevalent in Hiroshima, were con- fined largely to the southern extremities of the several islands comprising the city and hence were beyond the effects of the atomic blast. Typical industries served by the stacks studied in this sur- vey included relatively small establishments for the manufacture of needles, cameras, paint, matches, precision instruments, and similar items. d. Design and Construction. Concrete stacks appeared to be well designed. Walls were suf- ficiently strong to withstand heavy wind-loads, as well as the earth tremors so prevalent in Japan, without any appearance of clumsiness or excessive thickness. Spacing and size of reinforcing steel, wherever exposed to view, compared favorably with United States standards. The quality of workmanship, however, was generally mediocre. Reinforcing steel was not carefully placed and concrete thickness was permitted to vary consid- erably. Clumsy wood forms were used in sections averaging 4 or 5 feet in height, rather than the more practical steel slip forms. Some stacks were coated with a half inch of cement plaster in an effort to cover their rough appearance. Many of the concrete stacks were brick lined, usually one course, to a height of 10 or 15 feet. Brick stacks, especially the larger, octagonal-shaped ones, were usually both well designed and well constructed. Materials and workmanship were good. The smaller, square-shaped brick stacks, such as might be used on a public bath house, were built too lightly and frequently had to be braced with angle iron or steel straps and bands. Steel stacks were in a small minority. They followed no apparent standard in design; some were lap welded; others had riveted joints. Their chief weakness lay in the method of anchoring them to the brick base; anchor bolts, for example, extended through only four 1. Summary The part of Hiroshima which was affected by the blast of the atomic bomb contained numerous stacks of reinforced concrete, brick, and steel (Bhotos 1 to 4), averaging less than TO feet in height and designed to serve small industries and public buildings. Very few stacks in excess of 100 feet in height had been built in this area. In obtaining data, a method of sampling was em- ployed which gave a good cross-section of both damaged and undamaged stacks of the three most prevalent types. The survey revealed the stacks to be generally well designed, but frequently poorly constructed. Although in many instances, particularly in the case of undamaged stacks, it was impossible to get complete details and dimen- sions, sufficient data were obtained to lead to rea- sonable conclusions. It was estimated that within a concentric area of an 8,700-foot radius from GZ (beyond which no further damage to stacks was encountered) 15 percent of the concrete, 50 percent of the brick, and 70 percent of the steel stacks were damaged sufficiently to render them unusable without almost complete rebuilding. In all cases the cause of damage was believed to be blast. De- tailed analysis of the data disclosed mean effective areas against stacks constructed of concrete, brick, and steel to be 0.3, 2.7, and 4.1 square miles, respec- tively (Fig. 1). 2. Lay-out and Construction One of the oddities in the appearance of Hiro- shima was the existence of numerous apparently undamaged stacks rising out of the rubble of the flattened buildings they had formerly served. Further elaboration of this picture is given in the succeeding subparagraphs. a. Types of Stacks. The portion of Hiroshima which was most heavily damaged by the atomic bomb contained numerous stacks, both damaged and undamaged, averaging less than 70 feet in height. Large stacks serving heavy industry were few in number in this area; only six of those studied were 100 feet high or over, the highest be- ing 120 feet. Concrete stacks were by far the most numerous; brick types averaged less than a third of the total; and steel units were little in evidence. Several other types, such as vitrified-tile and asbes- tos-pipe, were encountered but were not considered worthy of study. b. Survey Method. The survey was based not upon data from all stacks in the area, but upon a 308 courses of brick in some instances, and were inef- fective in preventing overturning. 3. Analysis of Damage a. Tabular Data. Table 1 shows the physical characteristics of each stack studied and the extent of damage, if any. b. Extent and Cause of Damage. It is esti- mated that within a radius of 8,700 feet from GZ 15 percent of the concrete, 50 percent of the brick, and 70 percent of the steel stacks were damaged sufficiently to make them unusable without almost complete rebuilding (Photos 5 to 22). The re- mainder suffered either no damage or only minor damage, such as loosening of the cement-plaster finish coating or loss of all or a part of the steel ladders. Minor damage which would permit re- use of the stack without repair was not considered in this report as damage. The cause of damage was believed to be blast in all instances, since there was no evidence of spalled concrete, vitrified brick, or oxidized steel which wTould have pointed to fire as the cause of damage. c. Evaluation of Field Data. A total of 66 stacks was studied. It was possible to get good data on the 20 damaged stacks. On a few of the undamaged stacks it was possible to get data on thickness, size, and spacing of reinforcing steel, and other characteristics where the entrance of the breeching was above ground and accessible, but it was impossible to get complete data as the flue entrance was usually underground and covered with tons of rubble and debris. All concrete stacks, even though no reinforcing steel was visible, were believed to be reinforced. Although some data were impossible to obtain without destroying the stacks, sufficient information was secured to lead to reasonable conclusions. 4. Recommendations and Conclusions Analysis of the data revealed rein forced-con- crete stacks to be the most effective in withstand- ing the blast of the atomic bomb. Brick proved highly vulnerable, and steel appeared most subject to damage. The mean areas of effectiveness of the bomb against stacks of reinforced concrete, brick and steel were 0.3, 2.7, and 4.1 square miles, respec- tively. The mean effective radii were 1,625, 4,900, amid 6,050 feet. These conclusions, it must be remembered, are based upon the effects on stacks which averaged less than 70 feet in height. From the standpoint of economy, speed, and ease of con- struction it appeared that practically all of the stacks studied and reported on herein should have been constructed of steel pipe securely anchored to a reinforced-concrete base. Such a stack, even though blown down, could be quickly repaired on the ground and re-erected in one piece with the aid of a crane. Higher stacks, such as those of 100 feet or more, should be built of reinforced concrete or brick. The preponderance of concrete and brick as materials for stacks averaging no higher than those studied in Hiroshima was probably a reflection of the relative scarcity of steel and abundance of cheap labor in Japan. 309 Stack num- ber Grid Dis- tance from GZ (feet) Type Cross section Height (feet) Size Thickness Longitudinal reinforcing Horizontal reinforcing Special features Description of damage from base Base (feet) Top (feet) Base (inches) Top (inches) Size (inches) Space (inches) Size (inches) Space (inches) 1 5H 550 Concrete- 70 4 2 5'A % 9 («) (2) None 2 5H 500 do_ 70 4 2 do. Do. 3 5H 1,100 do do_ 60 4 2 5 4 lA 5 v* 5 4 5H 1, 700 Brick , - 60 7 18 NA NA NA NA Nbne Do. 5 6H 4,100 65 5 3 NA NA NA NA do . 6 6H 4,900 75 4 % 2^2 ... .do. Do. 7 70 6,100 Brick Octagon 85^ 12 8 6 6 NA NA NA NA Steel straps and bends on top Do. third. 8 70 6, 100 90 9 6 None . Do. 9 60 5,500 do. 53 2 Vi 2 A H NA NA NA NA Brick base 4 feet high. ___ _ Do. 10 60 5, 300 60 4 3 Do. 11 40 1, 600 60 4 2ii 7 H 9 Brick lining Do. 12 40 1, 900 60 4 3 6 A. 9 Vs do. 13 50 2, 400 65 4 2Vi 7 H 5 H1 6 do. 14 40 2, 400 60 VA 2 5 4 5 H 6 None_ _ __ . 15 40 2, 700 70 iVi 3 Brick lining ... 16 40 3, 700 70 4 2]4 None. _ - Do. 17 40 4, 000 70 4 2XA ..... do _ Do. 18 40 4,100 Octagon 55 8 5 28 NA Na NA NA Steel straps and bands on top Do. two-thirds. 19 40 4, 200 55 6 13 NA NA NA NA None _ 20 40 4, 200 55 6 13 NA NA NA NA do. Do. 21 40 4, 200 65 v/2 2 do 22 40 4, 400 65 Z'A 2 _,,. _ do Do. 23 61 6, 200 70 8 5 26 NA NA NA NA do _ Do. 24 61 6, 300 115 9 6 do Do. 25 61 6, 400 95 8 5 do Do. 26 61 6, 500 100 6 4 do Do. 27 71 6,800 60 4 2 Vi 4 H 12 Strengthened with 11 steel Fractured at 40 feet. bands. 28 71 6,900 Steel, brick base 60 m m J4 y* NA NA NA base. 29 6H 5t 700 50 6 3 22 NA NA NA NA do 30 51 5,000 50 5 NA NA NA NA do Crack at 28 feet; sheared off at 35 feet. 31 51 5r 100 75 4 2H do None. 32 6G 4, 000 40 4 2 NA NA NA NA do . Sheared off at 20 feet. 33 7F 8 700 80 4 2 do 34 7F 8 400 70 8 4 NA NA NA NA _ ...do Do. 7_F 8 200 70 4 2 6 y> do Do. 36 7F 8,000 Octagon .. 65 9 5 NA NA NA NA do Cracks above 10 feet; sheared off at 20 feet. Table 1-XIV.—Damage to Stacks Legends: NA—Not applicable. —Unknown, 310 Stack num- ber Grid Dis- tance from OZ (feet) Type Cross section Height (feet) Size Thickness Longitudinal reinforcing Horizontal reinforcing Special features Description of damage from base Base (feet) Top (feet) Base (inches) Top (inches) Size (inches) Space (inches) Size (inches) Space (inches) 37 7F 8,100 Brick 50 55$ 3 13 NA NA NA NA cal and horizontal angle iron. off at 30 feet. 38 60 4, 500 do 60 4H 2 13 9 NA NA NA NA Do. 39 4H 1, 550 100 5 3 40 411 2, 100 do 83 5 3 Do. 41 3H 3, 600 60 5 3 Do. 42 3H 3. 800 do 100 6 4 Do. 43 4H 3,000 do 72 5 3 8 6 do Do. 44 41 4, 800 69 hY> 35$ NA NA NA NA Do. 45 41 4, 200 115 7 5 Do. 46 47 5H 1, 700 70 5 3 None* * Do. 48 5H 1,300 70 4 25$ 8 6 54 6 Fractured at 5 feet. 49 5H 2,300 base.3 50 5H 2, 400 50 5 13 NA NA NA NA None Sheared off at 30 feet. 51 51 3, 200 50 4 25$ 12 % 6 54 6 do 52 61 3,800 Brick 50 65$ 13 9 NA NA NA NA do Sheared off at 30 feet. 53 51 3,900 Steel, brick*. 70 1 1 5i 5$ NA NA NA NA Steel portion 40 feet high; Steel portion sheared off. brickbase 3 feet square, 30 feet high. 54 51 4, 000 75 31{> m 3 4 54e 6 Sheared off at 55 feet. 55 5J 5,900 56 5J 6, 000 80 4 2 6 6 % 8 None None. 57 5J 5,600 86 9 6 Square base, 40 feet high, in- Do. tegral with building. 58 4J 6, 400 50 1H 154 54 54 NA NA NA NA Lap-welded joints... Do. 59 41 5. 300 70 5 2 None Do. 60 31 6, 300 50 5 NA NA NA NA Sheared off at 30 feet. 61 31 5,000 base.3 62 41 5, 200 Circle 60 I Vi l 54 54 54 NA NA NA NA Lap welded joints, base 354 Steel portion sheared off. feet square, 16 feet high. 63 5J 6,600 Steel-brick base do 54 nt 1M 54 54 NA NA NA NA Riveted joints, base 4% feet, Do. octagonal 38 feet high. 64 5J 6, 900 96 7 3 None... . None. 65 5J 7, 300 45 5 35$ NA NA NA NA Vertical and diagonal angle- Do. iron braces. 66 5J 8,100 120 8 5 Do. i 14 gage. 314-inch mesh. 3 Disregarded. 311 TYPICAL UNDAMAGED STACKS PHOTO 1-XIV. Stack 9. Typical steel stack with brick base. PHOTO 2-XIV. Stack 10. Typical reinforced- concrete stack. 312 SECRET GRAPHIC SUMMARY OF DAMAGE TO STACKS SHOWING LOCATION OF CONCRETE, BRICK AND STEEL STACKS WITH RESPECT TO DISTANCE FROM GROUND ZERO (Q2) CONCLUSIONS LEGEND MEAN AREA OF EFFECTIVENESS 0.3 SO Ml 2.7 SO Ml 4.1 SO Ml MEAN RADIUS OF EFFECTIVENESlS 1625 FT 4900 FT 6060 FT ■ UNDAMAGED, OR USEABLE WITH MINOR REPAIR COMPLETLY DESTROYED, OR REQUIRING REBUILDING CONCRETE BRICK STEEL SECRET U S. STRATEGIC BOMBIN6SURVEY DAMAGE TO STACKS HIROSHIMA, JAPAN FIGURE I - H3T 731568 O - 47 (Face p. 312) TYPICAL UNDAMAGED STACKS PHOTO 3-XIV. Stack 5. Typical square brick stack. PHOTO 4-XIV. Stack 36. Typical octagonal, brick stack. 313 DAMAGED REINFORCED CONCRETE STACK PHOTO 5-XIV. Stack 3. Reinforced concrete, 1,100 feet from GZ. 314 DAMAGED REINFORCED CONCRETE STACK PHOTO 6-X1V. Stack 14. Reinforced concrete, 2,400 feet from GZ, with heating pipes protruding from base. 731508—47 21 315 DAMAGED REINFORCED-CONCRETE STACK PHOTO 7-XIV. Stack 48. Fractured, reinforced-concrete stack, 1,300 feet from GZ. PHOTO 8-XIV. Stack 48. General view of stack shown on Photo 7. 316 DAMAGED REINFORCED-CONCRETE STACKS PHOTO 9-XIV. Stack 27. Reinforced concrete 6,800 feet from GZ. PHOTO 10-XIV. Stack 54. Reinforced concrete, 4,000 feet from GZ. Sheared off at 55 feet. PHOTO 11-XIV. Stack 12. Reinforced concrete, 1,900 feet from GZ. Fractured at 16 feet 317 DAMAGED BRICK STACK PHOTO 12-XIV. Stack 38. Square, brick, 4,500 feet from GZ. Sheared off at 30 feet. Note angle-iron bracing. 318 DAMAGED BRICK STACKS PHOTO 13-XIV. Stack 4. Hexagonal brick, 1,700 feet from GZ. Sheared off at 12 feet. PHOTO 14-XIV. Stacks 19 and 20. Square, brick, 4,200 feet from GZ. Sheared off at 35 feet. PHOTO 5-XIV. Stack 30. Square, brick, 5,000 feet from GZ. Sheared off at 35 feet. PHOTO 16-XIV. Stack 32. Square, brick, 4,000 feet from GZ. Sheared off at 20 feet. 319 DAMAGED BRICK STACKS PHOTO 17-XIV. Stack 37. Square, brick, 8,100 feet from GZ. Sheared off at 20 feet. PHOTO 18-XIV. Stack 50. Square, brick, 2,400 feet from GZ. Sheared off at 30 feet. PHOTO 19-XIV. Stack 25. Square, brick, 3,800 feet from GZ. Sheared off at 30 feet. PHOTO 20-XIV. Stack 60. Square, brick, 6,300 feet from GZ. Sheared off at 30 feet. 320 DAMAGED STEEL STACKS PHOTO 21-XIV. Stack 62. Steel with brick base, 5,200 feet from GZ Failed at anchorage to base. PHOTO 22-XIV. Stack 28. Steel with brick base, 6,900 feet from GZ Failed at anchorage to base. 321 SECTION XV PHOTO INTERPRETATION Page Object of study 323 Summary 323 General information 323 Part 1. Influence of the atomic bomb on photo interpretation 323 2. Characteristics of atomic-bomb damage as seen on aerial photographs 324 3. Evaluation of photographic interpretation physical damage report 325 4. Evaluation of photographic interpretation industrial report 328 5. Evaluation of military target analysis 334 6. Value of photographic intelligence to ground surveys 335 Photos 1-7, inclusive. Tables 1-12, inclusive. Figure 1, 322 /. Photographic intelligence has proved a defi- nite aid to ground survey groups in establishing the validity of interrogations, checking the status of the target on specific dates prior to the arrival of the field survey, and as guide and index for the area. 3. General Information It is the opinion of the members of the team that the factual information presented herein is ac- curate and in sufficient detail to warrant the recom- mendations and conclusions which are reached. a. Part 3 of this section is an evaluation of the accuracy of a physical damage analysis prepared by the Physical Vulnerability Section, Joint Target Group, dated 1 September 1945, as Special Project PV-P82. A complete copy of this report is filed with G—2, U. S. Strategic Bombing Survey. h. Part 4 is an evaluation of the accuracy of an industrial photographic interpretation report on the Japan Steel Works, Hiroshima Branch, pre- pared by AC/AS Intelligence, Photographic Divi- sion, as Buildings Construction Analysis (BCA) No. 60, dated 9 June 1945. A copy of this report is filed with G-2, U. S. Strategic Bombing Survey. c. Part 5 is an attempt to evalute the preattack general target information concerning the city of Hiroshima. As a basis for study CINCPAC- CINCPOA Bulletin No. 8-45 of 15 January 1945, entitled “Air Information Summary,” and Inter- pron Two Report No. 576 of 10 May 1945 were used. Since Hiroshima was not indicated as a target of primary importance, no detailed pre- attack urban analysis was done on the city. PART 1. INFLUENCE OF THE ATOMIC BOMB ON PHOTO INTERPRETATION 1. By the close of World War II, photographic interpretation had developed into one of the most important sources of intelligence concerning the enemy, his resources, plans, and action. In con- nection with the strategic bombing program, it was especially important in locating and identifying important targets, in determining the vulnerabil- ity of such targets to weapons available, and later in assessing the physical damage to the targets. The extensive use of photographic intelligence re- sulted in the development of certain techniques for obtaining necessary target information; with the advent of each new weapon or tactic a new tech- nique was required. For instance, when area incendiary attacks were begun, photographic in- terpreters were called upon to determine com- bustibility and built-upness of areas, to locate 1. Object of Study The objective of this section of the Hiroshima Physical Damage Report is (1) to recommend technical changes in photographic interpretation techniques necessitated by the use of the atomic bomb; (2) to study the characteristics of atomic- bomb damage which will be apparent on aerial photographs; (3) to evaluate the accuracy of in- telligence reports based on photographic coverage of the Hiroshima area; and (4) to comment on the value of photographic interpretation to a ground survey. 2. Summary a. New techniques or variations of existing ones which will take into consideration the integrated industrial, military, commercial and domestic activities and the diverse structural types which comprise an area under analysis as an atomic- bomb target must be developed for both preattack and postattack intelligence reports. h. Although there are some distinctive char- acteristics of damage which result from an atomic- bomb attack, they are similar to those which have been associated with previous weapons, and the two basic causes of damage, blast and fire, can be identified by current photographic interpretation techniques. c. The Physical Damage Report on Hiroshima prepared by the Joint Target Group was generally correct in description of the damage, but was inac- curate in respect to certain details: Ground zero of the blast was mislocated by approximately 1,130 feet; the reported area of total damage was sub- stantially correct, the mean area of effectiveness (MAE) of the bomb was slightly overestimated; and the reported damage to concrete buildings did not correspond to the findings of the ground survey. cl. The photographic intelligence study of the Japan Steel Works, Ltd., reported correct, or closely allied, occupancy to buildings comprising 90 percent of the total plant area and gave a rea- sonably accurate description of the vulnerability of the plant to blast damage, but underestimated the vulnerability of the target to fire. e. General information concerning Hiroshima as a military target was relatively accurate. Few reports had been prepared on the area and the amount of intelligence information was limited, since the city was neither one of the primary urban targets, nor was it highly industralized. 323 firebreaks and fire walls, and the like, factors which would affect the number and type of distri- bution of bombs to be dropped. Many of these data had not been required for high-explosive, “pin-point” bombing used prior to this time. The use of the atomic bomb requires additional changes in photographic interpretation techniques. 2. Basically an atomic-bomb attack is an attack by a single, highly effective bomb which will cause damage to an extensive built-up area comprising, singly or in combination, urban, industrial, and military concentrations. The concept of an attack which affects the integrated activities of a target area is prerequisite to the analysis of the changes in photographic intelligence techniques suggested. a. Preattack Analysis. (1) The concept of a target must be revised to comprise an area of in- tegrated activities rather than an individual build- ing, individual plant, or single military instal- lation. (2) A suitable method must be developed for evaluating the economic vulnerability of a target area, which will take into consideration the in- tegrated industry, transportation, services, utili- ties, and housing which would be affected by attack. (3) A suitable method must be developed for evaluating the physical vulnerability of a target area, one which takes into consideration the diverse structural types and the mean area of effectiveness of an atomic bomb to each, assuming the aiming point is known. (4) A suitable method must be developed for the relative evaluation of different possible aiming points with respect to both economic and physical vulnerability of the target. h. Damage Assessment. (1) The over-all pat- tern and extent of damage to an urban concentra- tion resulting from an atomic-bomb attack differs somewhat from those resulting from an attack by high-explosive or incendiary weapons, but the characteristics of damage to an individual struc- ture remain unchanged as far as photographic evidence is concerned. Therefore, no basic change in interpretation techniques is required, but more rapid methods of analyzing the economic and physical damage to an area will be necessary. PART 2. CHARACTERISTICS OF ATOMIC- BOMB DAMAGE AS SEEN ON AERIAL PHOTOGRAPHS 1. A study of the damage to Hiroshima gives evidence of certain characteristics which can be associated with the atomic bomb. A review of these will be a guide to photographic interpreters in identifying and analyzing similar instances of damage. Blast and fire are the causes of damage, and, when present separately, have distinctive ap- pearances on photographs, regardless of the type of weapons used. It is very difficult, however, to differentiate between the two distinctive types of damage when fire has occurred to a blast-damaged area, as was the case at Hiroshima. 2. In analyzing damage it is always necessary to approach the problem with the pattern in mind of the usual or expected reaction of the weapon used in the attack. At Hiroshima, the bomb exploded about 2,000 feet above the heart of the city and destroyed approximately 4 square miles of built-up area. Around this area of complete devastation, in which only earthquake-resistant buildings were left standing, were concentric areas of decreasing damage, ranging from structural to minor. Fire contributed to the damage by consuming most of the buildings collapsed by blast, and, in places, spread of the fire destroyed others not structurally damaged by blast. In many instances, therefore, the fire fringe coincided with the fringe of total damage. Minor blast damage, including exten- sive glass breakage and some wall and roof strip- ping, extended as far as 4 miles from ground zero; and in a lesser degree as far as 7 miles. 3. The effectiveness of the atomic bomb is largely due to blast. The blast damage resulting from an ordinary high-explosive bomb with a much smaller mean area of effectiveness is characterized by a radial appearance of the damaged members and debris extending outward from the center of dam- age. Damage resulting from the atomic bomb has the same characteristic appearance, but because of the much broader area affected, it is not so dis- tinctly apparent. The concentric circles of dam- age, previously mentioned, reflect this character- istic, but the regular pattern of damage is often interrupted by topographic features. In good- quality, large-scale photographic coverage, it is likely that other evidence of the radial appearance can be seen. Some of these would include street- cars displaced from rails, overhanging cornices broken, bent flagpoles and utility poles, and col- lapsed walls, all of which will be directionally away from the center of damage. When this evi- dence is properly evaluated it may aid in locating the approximate ground zero or center of damage. 4. The fire damage resulting from an atomic- 324 bomb attack does not differ in appearance on aerial photographs from that of an ordinary incendiary attack but the pattern of the fire fringe does differ somewhat. In an incendiary attack, the windward boundary of the fire fringe will usually be jagged and irregular, and beyond the fringe there will be many isolated cases of small fires caused by the “spill-over” of the attack, which were controlled by fire fighting. On the leeward edge, it is more difficult to fight the conflagration because of the intense heat and smoke; consequently, the fire usually burns unchecked until it reaches a firebreak or area of low built-upness. This results in a fire fringe that is more regular than on the windward side, where fire fighting could partially control the blaze. 5. The pattern of the fire fringe in the case of the atomic-bomb attack on Hiroshima tended to be more regular on all sides because fire originat- ing in a large area around the center of damage was so intense that the air was drawn inward from all directions, and, therefore, fire was less likely to spread outward and make indentations into the unburned area. This phenomenon would have been unlikely if a moderate or strong natural wind had been blowing at the time of attack; in that case the pattern of the fire fringe would prob- ably have reflected the more normal spread of fire to leeward. Although some instances of isolated fires occurred outside the fire fringe, they were noticeably less numerous than would result from an incendiary attack, when ignition can be attribu- ted to “spill-over.” 6. The limits of the fire are important in dam- age assessment, as was demonstrated in Hiroshima where nearly all concrete buildings left standing within the fire fringe were gutted by fire, and severe damage was caused to machine tools and other equipment in industrial structures. 7. Color photography would increase the accu- racy of fire-damage assessment, if it were more extensively used. Color photography of Hiro- shima showed the burned-over area to be more red than the remainder of the damaged area. PART 3. EVALUATION OF PHOTO- GRAPHIC INTERPRETATION PHYSI- CAL DAMAGE REPORT 1. The damage to Hiroshima City resulting from the atomic-bomb attack of 6 August 1945 is the subject of a report issued by the Physical Vul- nerability Section of the Joint Target Group. The report was based on a study of photographic sortie 3PR-5M391 of 9 August 1945, and is a general, preliminary analysis giving a close ap- proximation of the damage incurred by the city. The following subsections are a check of various parts of this report. 2. Ground Zero. a. The location of the ground zero as estimated by the Joint Target Group re- port was approximately 1,130 feet to the northeast of the actual ground zero. The reported probable degree of error was plus or minus 500 feet. b. The atomic bomb dropped on Hiroshima detonated about 2,000 feet in the air and conse- quently left no crater to establish the point of explosion. The reported ground zero was appar- ently located by determining the center of the roughly circular area of total destruction in the heart of the city. As no data on the attack were available at the time, this method appears to be the only one possible under the circumstances, but the fact that such a large error resulted indicates that this method is not reliable. It would only be reliable when the area affected was equally vul- nerable in all directions, and the resultant fire spread equally in all directions. The survey de- termined the actual ground zero by examination of flash marks, and flash shadows, none of which would be apparent in aerial photos. Other indi- cations of blast direction, i. e., the leaning of buildings, damaged sides of buildings, and over- turned street cars, might be apparent in photo- graphs under certain circumstances, but “excep- tions to the rule” and unusual examples would probably prevent anything but a rough approxi- mation of the actual ground zero. 3. Area of Damage, a. The 4-square-mile area of virtually total destruction reported by the Joint Target Group is substantially correct. One small area of additional damage (0.048 square mile) was beyond the limits of the photographic coverage available for the report. b. No exact figure for the total area of damage was given in the report due to quality of cover. In lieu thereof, the percentages of damage at vari- ous distances from the ground zero were given, and these were based on damage to the larger buildings in the more important industrial, military and public installations. In support of this method the report states that: Although the larger buildings* presented a larger area to the blast wave and hence might be expected to receive ♦“Larger buildings” refers to industrial and storage buildings other than those reported as concrete buildings. 325 more damage than smaller buildings, on the other hand, the larger buildings are stronger and less vulnerable than the smaller buildings which are chiefly residences * * * these two effects largely cancel each other. It is the opinion of the members of this team that such reasoning does not hold for this particular case because many of the “larger buildings” which were examined exhibited a much greater vulner- ability to damage than residential type structures. The “larger buildings” which were prevalent throughout Hiroshima were chiefly wood-frame, industrial-type buildings and were extremely vulnerable to blast. Enough of them were in- cluded in the calculations of the Joint Target Group report to affect the accuracy of the results. The mean area of effectiveness for these two specific types of structures is given in Part 3, Para- graph 6c, and reflects the opinion expressed above. ' c. The Joint Target Group report tabulated the area of damage by urban area zones in the central area of damage. The zones depended upon the built-upness and occupancy assigned by photo in- terpreters from prestrike cover. The accuracy of these zones cotdd not be checked on the ground because of the complete devastation and because no reliable Japanese documents furnishing this information were recovered. 4. Check on Damage to Concrete Buildings, a. When viewing the damage photographs of Hiro- shima, one immediately notices reinforced-concrete buildings standing apparently undamaged throughout the area of total destruction. This significant point was given some prominence in the Joint Target Group report. A study was made from preattack and postattack photos to determine the number and location of concrete buildings and extent of damage sustained by them as a result of (he atomic-bomb attack. Table 1 from the report shows the result of this study. I). Table 2 was compiled from data gathered at the site. The buildings included therein comprise all of the reinforced-concrete structures (plus those of composite steel and reinforced-concrete frame) found in the city, three of which were beyond the limits of the blast and fire studies. No direct com- parison is made between these figures and those given in Table 1. It is the opinion of the team that only the damage in the first two categories, i. e., 100 percent structural damage and 50-99 percent struc- tural damage, could have been determined with any degree of accuracy from the photographic coverage used for the report. The actual physical Table 1.—Reported damage to concrete buildings Distance from center of impact Total number of buildings Number partly destroyed Number completely destroyed 0 to 1,000 feet 10 1 1 1,000 to 2,000 feet 13 1 0 2,000 to 3,000 feet 5 0 0 3,000 to 4,000 feet 7 0 0 4,000 to 5,000 feet 3 0 0 5,000 to 6,000 feet 10 1 1 6,000 to 7,000 feet 0 0 0 7,000 to 8,000 feet 0 0 0 8,000 to 9,000 feet _ . 1 0 0 9,000 to 10,000 feet 0 0 0 10,000 to 11,000 feet 1 0 0 Beyond 11,000 feet 0 0 0 Total 50 3 2 damage to buildings is given here with respect to distance from ground zero, which was the basis for the reported figures in Table 1. Table 2.—Actual damage to concrete buildings Distance from Ground Zero Num- ber of build- ings 100 percent struc- tural dam- age 50-99 percent struc- tural dam- age 1-49 percent struc- tural dam- age No struc- tural dam- age 0-1,000 feet 9 0 2 5 2 1,000-2,000 feet 14 3 1 8 2 2,000-3,000 feet 9 0 0 2 7 3,000-4,000 feet 7 0 0 0 7 4,000-5,000 feet 9 0 0 0 9 5,000-6,000 feet 9 2 1 1 5 6,000-7,000 feet 4 0 1 0 3 7,000-8,000 feet 3 0 0 0 3 8,000-10,000 feet 10 0 0 0 10 Total 74 5 5 16 48 c. Identification of Concrete Buildings. Twenty-five of the seventy-four reinforced-con- crete buildings in the city were not identified as such in the Joint Target Group report. Usually this type of building is easily identifiable in Japa- nese cities by the typical flat concrete roof slab. An examination of the photographic coverage used for the report indicates the following possible reasons for this discrepancy: (1) N ine buildings were too small to be identi- fied or considered of importance. (2) Four buildings had gable roofs with tile covering. (3) Two buildings had saw-toothed roofs. (4) One building was not covered by photog- raphy. 326 despite the fact that these photographs were taken under ideal conditions after the close of hostilities. 5. Chech on Functional Assignments. In the Joint Target Group Report, 67 installations were annotated and given functional identifications, 51 of which were checked by the Survey. These identifications were derived from all available sources of intelligence (mainly ground informa- tion and photographic interpretation). Since photographs are usually used to substantiate ground information, all such identifications are considered in the following check. It should be noted that the city of Hiroshima was not consid- ered a priority, strategic-bombing target until the atomic-bomb attack and no comprehensive intel- ligence study had been made of the target. (5) Nine buildings were apparently overlooked. (Only two buildings were incorrectly identified as being constructed of reinforced concrete, and both had flat, concrete-slab roofs, supported by load- bearing, masonry walls.) (I. I>am age to Stt'uctures. (1) Of the five buildings suffering 100-percent structural damage, the damage to one building was correctly assessed; three buildings were not identified as concrete and therefore not assessed; and one building was marked undamaged. (2) Of five buildings 50-99 percent structurally damaged, the damage to one building was cor- rectly assessed; and no damage was assessed on four buildings. (Two other buildings reported as partly destroyed actually sustained only minor damage.) e. Damage to Contents. It is impossible from vertical photographs to assess internal damage to buildings, the roofs of which remain intact, and no attempt was made to do so in the Joint Target Group report. It is felt, however, that it will be of interest to show the figures since practically all concrete buildings within the badly damaged area of the city did suffer internal damage from fire. Table 4.—Functional identification Number of Percent of Type of identification: installations total Identified correctly 26 50.0 Identified incorrectly _ 11 21.6 Given similar identification -I 7. 9 Unidentified by P. I. report _ _ 10 19. 6 Total 51 100. 0 6. Mean Area of Effectiveness {MAE). a. The MAE of a weapon is the probable area of a given type and degree of damage which would result, if the weapon were used against an area of unlimited extent, completely built-up with targets of the specific type and construction under consideration. h. The Joint Target Group reported the MAE for superficial damage to average, single and multistory buildings to be 10.1 square miles with the Hiroshima atomic bomb. c. The MAE’s of this bomb for structural dam- age determined by this team (Sec. X) are as follOAVS Table 3.—Damage to contents Fire damage to contents Number of buildings: (percent) 89 100 15 _ - 50-100 3 - - - 0- 50 17 _ _ — — - - 0 Note.—All but 6 buildings were within the burned area. An examination of large-scale, oblique coverage of Hiroshima failed to show evidence of this expen- sive fire damage to the interiors of the buildings. Such damage could be detected in only a few cases Type of construction Vulnerability MAE (square miles) MAE radius (feet) Multistory, earthquake-resistant. - Multistory, steel- and R. C.-frame (including earthquake-resistive buildings). Light steel-frame . „ VI _ V3; VI 0. 03 . 05 500 700 V4 3. 4 5, 500 5, 700 7, 300 Multistory brick - .. . V3A. 3. 6 V4 6. 0 One story brick V4__ 6. 0 7, 300 8, 700 9, 200 Wood-frame industrial-commercial construction V3; V4 8. 3 Wood-pole construction - - V3; V4 9. 5 Table 5.—Mean areas of effectiveness 327 d. Since the reported MAE was figured for su- perficial damage and the team’s MAE was for structural damage no direct comparison of the two can be made. Moreover, many of the buildings (particularly the wood-pole and the wood-frame, industrial-commercial types of construction) re- ported by Joint Target Group as being of V3 and Y4 vulnerability were found to be much more vul- nerable than the average buildings in these two categories. e. It should be pointed out that in Hiroshima domestic structures were Jess vulnerable than the most prevalent of the V3 and V4 buildings, namely, the wood-frame, industrial-commercial and the wood-pole construction types. /. It is inadvisable to attempt to compute an MAE from aerial photographs, uidess the quality of the cover permits reasonably accurate determi- nation of building types. This is exemplified by the extreme variation of the MAE’s shown in Table 5 for V3- and V4-type buildings for which one MAE was reported by Joint Target Group. PART 4. EVALUATION OF PHOTO- GRAPHIC INTERPRETATION INDUS- TRIAL REPORT 1. The only target in the vicinity of Hiroshima on which industrial interpretation reports were made was the Japan Steel Co., Ltd., Hiroshima Branch (Target No. 90.30-1891). a. The photographic intelligence functional analysis report on this target assigned correct or closely allied occupancy to approximately 90 per- cent of the total plant area. h. The photographic intelligence structural analysis report gave a reasonably accurate descrip- tion of the target as regards vulnerability to high- explosive attack. The vulnerability of the target to fire was considerably underestimated, princi- pally because of the prevalence of wood sheathing and framing members under noncombustible roof covering. The only general error in the assign- ment of building construction classifications con- cerned buildings housing overhead traveling cranes, where the capacity of the cranes was greatly overestimated. c. The 6 August 1945 atomic-bomb attack in- dicted some damage to the plant which was located approximately 4 miles from ground zero of the atomic bomb. There was no structural damage and no loss of production as a direct result of phys- ical damage; however, production was stopped for ten days while company personnel participated in emergency relief work in the urban area. 2. Description of the Target, a. The Japan Steel Works, Ltd., Hiroshima plant (Fig. 1), was located approximately 4 miles east-southeast from the ground zero on the seaward side of the Hiro- shima-Kure coastal highway. The total site area was 220 acres and the plant comprised 80 installa- tions (74 of which were buildings) of functional importance arranged in an irregular pattern be- tween the highway and Ujina Ko. h. The plant consisted of three general areas of production, the largest area being devoted to fabri- cating and machining Army and Navy ordnance items other than ammunition. The principal products of this section of the plant were guns of sizes up to 40-caliber, 12.7-millimeter antiaircraft, torpedo discharge tubes, various special forgings and castings for gun turrets, and shells. c. The second area, on the waterfront in the southern section of the plant, fabricated and as- sembled submersible transports (large subma- rines) for the Army. d. The third area, in the southeasterly section of the plant on the narrow coastal strip at the foot of a steep rise, produced 25-millimeter ammuni- tion, including explosives, cartridges, and percus- sion fuses. e. Nonmilitary products produced were reaction and mixing tanks for nitrogen fixation and rail- road coupling shock absorbers. f. A large part of the raw materials were sup- plied by the Army and Navy and were machined and assembled at the plant. 8. Description of Damage, a. No attack, air or surface, was directed against this company’s plant; the slight damage, hereinafter described, resulted from the atomic-bomb attack against Hiroshima on 6 August 1945. No structural damage was sus- tained by the plant, but superficial or minor dam- age occurred to all major buildings. All damage was due to blast; no fires were started. No inter- ruption of processes nor damage to vital machin- ery resulted from the physical damage to the plant; but because of wide devastation in the Hiroshima area, production was halted to expedite emergency relief for 10 days, 6-15 August 1945. h. The day of the attack was a company holiday and only a bare skeletop crew was at the plant. Casualties to employees, many of whom lived in Hiroshima, were consequently greater than it otherwise would have been. 328 SECRET US STRATEGIC BOMBING SURVEY j JAPAN STEEL CO. | HIROSHIMA PLANT i FIGURE l-XZ 329 c. The following tabulations prepared by the company show the damage resulting from the atomic bomb. Damage to the small Nisikaniya branch factory building located near the railway station in central Hiroshima is included in the following tabulation, which erroneously gives the impression of a high percentage of damage to the main plant itself. stripping, glass breakage, deformation of metal sash, and some fracture of light, wooden, inter- mediate, framing members. Almost all indica- tions of blast were outward from the building, and the most severe damage occurred to the buildings tightly closed to the elements. The small revetted buildings in the explosive-manufacturing area were undamaged except for a very small amount of glass breakage. 4. Functional Analysis Evaluation. This eval- uation is based on the occupancy reported by the Joint Target Group for analyzing the functional importance of each building in the plant. a. Boundaries. The boundaries as reported were substantially correct, and included all the productive parts of the plant. The administra- tive area in the northern corner was not included (this area contained the bulk of the general office space, student dormitories, and classrooms). h. Building Identification. The accuracy of individual building occupancy identification is tabulated as follows: Table 6.—Damage to Japan Steel Co., Ltd. Damage to property: (a) Factory: Percent Roof _ 20 Wall* _ 90 Glass 95 N. B. Nisikaniya branch factory badly damaged. (b) Dormitory and factory houses: Percent 10 Wall* 30 Glass 60 (c) Machinery and equipment: Machinery, electric power, water mains. Minor damage. Casualties up to 27 September 19)5: (a) Employees; Killed 376 Seriously injured 212 Slightly injured 249 N. B. Total number of employees, 5 August, 18,082. (h) Employees' families: Killed . 520 Seriously injured 516 Slightly injured 676 Expenditures: Special payments, food, clothing, medical care, 631,475 yen. Production losses: From 6 to 15 August, factory production was halted and employees were put on relief restoration work. Losses are estimated as follows: Man-hours lost, 261,680 ¥130.840 Production 1, 600, 000 ¥1,370, S40 *Nonstructural damage except at Nisikaniya. Type of identification Number of buildings Area (square feet) Percent total area Identified correctly 36 830. 7 58. 2 Of similar occupancy _ _ 17 396. 6 31. 0 Unidentified in report 6 38. 2 3. 4 Wrongly identified 15 102. 4 7. 4 Table 7.—Building identification (1) The tabulation shows that apparently no cognizance was taken of the fact that in Japanese industrial lay-out, service buildings (e. g., em- ployees’ cloak rooms and mess halls) were often found adjacent to the large shop buildings, and, as a result, these service buildings were misidenti- fied as warehouses. (2) In this plant the production flow line was not sufficiently straightforward to deduce from relative position in the layout the process in each building. c. Services. The plant was serviced by rail, highway, and lighterage, d. Area of Plant. The total area of land owned by the company was 220 acres. The re- ported area of the target was 143 acres. The land owned by the company included wooded and rough-terrain areas not suitable for industrial purposes, which were correctly excluded from the reported target area. d. The most extensive damage to any one build- ing was observed at Building 30 (Fig. 1). The three bays on the opposite end of the building from the center of blast sustained roof stripping and a few wood purlins were broken. Both end walls were stripped, steel sash were distorted and glass was broken. The building was closed at the time of the attack, e. It was found in general that the heaviest dam- age occurred at the ends of buildings away from the center of blast. It consisted of wall and roof 330 PHOTOS 1-XV and 2-XV. Building 20 (Fig. 1-XV). No damage other than glass break- age and distorted window frames occurred to this modern concrete r o o fed industrial building. PHOTOS 3-XV and 4-XV. Building 30 (Fig. 1-XV). Interior and exterior views of this light steel framed in- dustrial structure, show the character and extent of roof and sidewall stripping. 731568—47——22 331 PHOTO 5-XV, Building 24 (Fig. 1-XV). This light, wood-framed, one-story structure, covered with stucco, was blown about 12 inches out of plumb by the bomb blast, but its usefulness was unimpaired. PHOTO t»~XV. Building 71 (Fig. 1-X V). The submersible transport assembly building, in the southeastern part of the plant, sustained some wall stripping. PHOTO 7-XV. This gen- eral view shows the uni- formity of superficial dam- age to the buildings in the plant area. 332 5. Structural Analysis Evaluation, a. Scale. An average error of 3 percent was found after checking reported dimensions against ground dimensions, b. Orientation. The north indicated on the tar- get plan was found to be approximately 20 degrees east of true north. c. Building Construction Types. The Joint Target Group building construction analysis sec- tion has established a classification system for structures, based on distinctive differences in de- sign of the usual industrial-type buildings. The classification system, shown in Reference Tables, takes into consideration the basic design of the structure, truss or girder span, column height, number of floors, and resistance to shock loading. (1) Correct building-type classification was re- ported by the Joint Target Group for 56 buildings, representing 49.5 percent of the plan area; 21 buildings, representing 50.5 percent of the plan area, were incorrectly classified. Of those incor- rectly classified, 10 buildings, representing 39.0 percent of the plan area, were reported as Bl type and wTere actually B2 type. The difference be- tween Bl and B2 construction types is in the capacity of the overhead traveling crane only. (2) Table 8 compares the reported and actual areas in each building construction classification. percent of the total plan area, were assigned a wrong vulnerability factor. Although the high- explosive vulnerability factor depends directly on the building construction type, several building types carry the same vulnerability factor. Such is the case with Bl- and B2-type buildings, each of which carries a V2 vulnerability rating. This accounts for the smaller percentage of error than was made in assignment of building construction types. (2) Table 9 gives the reported and actual floor areas for each high-explosive vulnerability factor. Table 9.—Reported and actual HE vulnerability HE vulner- ability factor Reported Actual Number of build- ings Area (thousand square feet) Percent of total Number of build- ings • Area* (thousand square feet) Percent of total V2 16 887. 5 64. 6 18 972. 6 71. 4 V3 6 39. 9 2. 9 9 53. 9 3. 6 V3A 0 0 0 2 3. 7 . 3 V4 56 441. 5 32. 5 49 338. 7 24. 7 Total 78 1, 368. 9 100. 0 78 1, 368. 9 100. 0 ’Based on the Joint Target Group reported areas for comparison. e. Combustibility Factors. A total of IT build- ings, representing 48.0 percent of the total plan area, were assigned incorrect combustibility rat- ings. All errors were in reporting combustible buildings as noncombustible. A building is rated as combustible (C) if either or both main frame or covering (roofing or siding) is of a material which will in itself support combustion; rated non- combustible (N) if, although the materials will not support combustion, it will be structurally dam- aged by intense heat; and rated resistive (R) if the materials will neither support combustion nor be affected by heat. (1) The most common error in this case was in the description of the roof. In most cases the roofing, although noncombustible (either tile or corrugated-asbestos) was over wood roofers. This placed the building in the combustible category. Wood framing was used much more extensively in this plant than in similar industrial plants in the United States. Several instances were found where heavy wood framing was used in buildings housing overhead traveling cranes. Company of- ficials stated that a shortage of steel for wartime construction led to this expedient. Table 8.—Reported and actual construction types Building con- struction classi- fication Reported Actual Num- ber of build- ings Area (thou- sand square feet) Per- cent of total Num- ber of build- ings Area* (thou- sand square feet) Per- cent of total Al.l 2 59. 1 4. 3 4 78. 8 5. 8 A2.3 8 199. 7 14. 5 7 100. 0 7. 3 Bl__ 10 522. 4 38. 2 1 15. 0 1. 1 B2__ 6 365. 1 26. 7 17 957. 6 70. 3 D 46 182. 7 13. 3 38 159. 9 11. 6 E2__ 6 39. 9 2. 9 9 53. 9 3. 6 F2 0 0 0 2 3. 7 . 3 * Based on the Joint Target Group reported building areas for comparison. d. High-Explosive Vulnerability Factors. The Joint Target Group classification system for blast vulnerability of industrial structures is based di- rectly on classification of building-construction types explained in subsection c above. Vulnera- bility varies from VI to V5, most resistant to least resistant, respectively. (1) A total of ten buildings, representing 12.8 731568—47 -23 333 (2) Table 10 compares reported and actual areas of combustibility ratings. Table 12.—Crane capacity Building No. (Figs. I-XV) Crane capac- ity (tons) Span (feet) Eave height (feet) Occupancy 60 60 75 56 Assembly gun carriage and turrets. 11 15, 10, 5 40 38 Foundry. 58c 15, 10 48 28 Machine shop (gun bar- rels) . b 15 57 32 Do. d and e 10, 5 45 23 Do. 14 10, 5 40 38 Scarfing shop. 201) 10 47 38 Machine shop. 39a 10 45 36 Assembly and machine shop. e 10 33 32 Do. 71 10, 5 45 26 Subtransport fabrication and assembly. 8a 5 60 42 Sheet metal shop. 20a and c_ 5 40 38 Machine shop. 26 5 35 34 Do. 30 5 42 30 Do. 44 5 27 26 Do. 7 3 57 30 Do. 8b 3 36 42 Sheet metal shop. A study of this tabulation indicates that the visible characteristics of the buildings do not accurately indicate crane capacity. Table 10.—Reported and actual combustibility ratings Reported Actual Combustibility rating Area (thou- sand square feet) Percent of total Area* (thou- sand square feet) Percent of total Combustible (C)_ _ . Noncombustible (N) 241. 5 1,127. 4 17. 9 82. 1 1,014. 0 349. 9 74. 1 25. 9 (No resistive (R) buildings were reported; 2 small substations, not included above were of resistive-type construction.) ♦Based on Joint Target Group areas for comparison. /. Building Heights. Of the 28 buildings checked, results were found as shown in Table 11. Table 11.—Building heights Num- ber of build- ings Average error Percent- age of build- ings Percent- age error (based on building height) No error 4 None 14 0 Overestimated 9 5. 9 32 20 Underestimated 15 5. 8 54 20 k. Camouflage. No extensive camouflage was attempted at the plant. On the roof of Building 20 (Fig. 1-XV) steel dlings were spread in a dis- ruptive pattern for camoudage. Company officials stated that this expediency was caused by their in- ability to secure weather-resisting paint. 6. Comments. It is the opinion of the team making this survey that neither specidc recom- mendations can be made nor conclusions drawn from the study of this single target. Attention is invited, however, to the following: a. Ten days’ production loss occurred because of atomic-bomb damage in the area, although only negligible physical damage was indicted on the plant. b. In the determination of vulnerability of buildings from aerial photographs, it is necessary to have complete knowledge of construction prac- tices in the country under study. It would seem advisable that such pertinent information be obtained for future use in an emergency. PART 5. EVALUATION OF MILITARY TARGET ANALYSIS l. Hiroshima was primarily an Army headquar- ters and port of embarkation. Few industries of g. Crane Study. Since the greatest error in as- signing construction types was made in estimating the capacity of cranes housed in the B-type build- ings, a tabulated comparison (Table 12) of the crane capacity to occupancy, span and eave height of 14 buildings was prepared. h. Building Subdivisions. In most cases build- ings were subdivided correctly. No detailed study is necessary. i. Service Buildings. Several multistory build- ings among the production buildings were reported as storage; these were cloak rooms, mess halls, and office space. Story heights varied from 10 to 12 feet. Second story was clear span, while the first- story spans were reduced by columns, j. Buildings Removed. One steel-frame struc- ture (Building 42, Fig. 1-XV) was in the process of being removed to provide a working area be- tween the forge and foundry. Small combustible buildings were removed to reduce fire hazard; these were all storage buildings. Wood block doors were removed in several machine shops to prevent fire spread. 334 strategic importance or major airfields were lo- cated within the immediate area. Few photo- graphic reconnaissance missions were flown over the city, and little photographic interpretation was done. 2. Airfields. Hiroshima airfield was located on reclaimed land at the southern end of Yoshijima. It was developed as a subsidiary base for small land and float planes used in connection with the army headquarters. The surface of the field and runways was hard-packed gravel; the service apron and float plane ramps were concrete sur- faced. Buildings were of frame construction of a relatively vulnerable type, and barracks, utility buildings and shops Avere of standard Japanese light, wood construction. a. CINCPAC-CINCPOA Bulletin No. 8-45, of 15 January 1945, based on ground and prisoner-of- war intelligence and limited photo coverage, re- ported the field as uprobably a secondary military airfield with adequate facilities, reported to ha\’e one asphalt-surface runway.” b. Interpron Two Photographic Interpretation Report No. 576 of 10 May 1945, based on complete photo coverage of this airfield area, reported the field substantially as it was found by the ground survey. 3. Antiaircraft Defenses. At the time Avhen the survey team arrived in the field, the Japanese had nearly completed the removal of weapons in ac- cordance with instructions from Supreme Allied Headquarters. Consequently, no accurate check could be made for comparative study. From spot checks of reported gun positions it appeared that the number of medium antiaircraft defenses had been overestimated, but that, in general, the loca- tions of batteries Avere nearly correct. In some instances, abandoned locations were reported as gun positions. The Assistant Chief of Staff, G-2, of the Forty-first Division had made a complete check of all defenses in the Hiroshima area, but results were not available at the completion of the USSBS field survey. 4. Army Headquarters and Army Provisioning. Hiroshima Avas the administrative headquarters of the Chugoku Military District, and a primary em- barkation point for the Japanese Army. The city had progressively become more important as a center of army activity beginning with the Sino- Japanese War, and as early as 1929 at least 28 per- cent of usable land area within the limits of Greater Hiroshima City had been taken over by the military for administration, training, housing, arming, and provisioning of troops. Activity con- tinued to increase during World War II with the embarkation of troops for duty in the Central and South Pacific and later for the frenzied defense of the Marianas, Bonins and Ryukus. CINCPAC- CINCPOA Bulletin 8-45, reported the facts that the city was a primary port of embarkation for the Japanese Army and that extensive barracks and depot facilities were present. 5. Harbor and Shipbuilding. Hiroshima har- bor facilities were used mostly for embarkation operations, supplying troops, fishing and inter- island transportation. No extensive dockage for large tonnage shipping could be easily provided because of the delta formation on which the city had been built. The military pier and municipal pier, both in Ujina, were suitable for extensive lighterage and small interisland boats, but not for the larger seagoing cargo and transport ships. Small shipyards at Ujina were equipped to con- struct the smaller craft. The Mitsubishi Ship- building Co. at the southerly end of Ebajima was equipped to fabricate and assemble larger ships, with three ways for accommodating ships of at least 3,000 tons. (One of these 3,000-ton ships was alongside the fitting-out pier at the time the field survey was made.) CINCPAC-CINCPOA Bulletin No. 8-45 in general correctly reported the facilities except for the Mitsubishi Shipbuilding Co. Maps of the area prepared later included cor- rected data based on complete photographic cover- age. 6. Industry. Hiroshima had never been a highly industralized city; there were only three factories employing over 500 persons at the close of tlie war. No comprehensive preattack intel- ligence study of the area was found when prepar- ing this phase of the target evaluation, but com- posite sources including Army Map Service, Joint Target Group, CINCPAC-CINCPOA and Inter- pron Two indicate that the principal industries were identified and the relative importance of in- dustrial targets reported with reasonable accuracy. PART 6. VALUE OF PHOTOGRAPHIC IN- TELLIGENCE TO GROUND SURVEYS 1. It is generally recognized that ground photo- graphs are necessary to illustrate and verify data compiled by a unit conducting an on-the-ground survey of an area, and photographers are usually assigned to such a survey to satisfy this need. However, the potential usefulness of aerial recon- 335 naissance photography which has been taken prior to the arrival of the field survey is not always recognized. The following suggestions, based on the experiences of the photographic interpreters of Physical Damage Team 1, are offered as a guide in planning future surveys, so that this source of information may be more thoroughly utilized. 2. Uses of Photographic Intelligence by Physi- cal Damage Team 1. a. In Hiroshima there was frequent difficulty in establishing the cause of damage since a typhoon and floods had ravaged the city a few weeks following the atomic-bomb attack but before the survey team had arrived on the scene. Photographs taken in the interval be- tween the dates of the attack and the typhoon were often used to establish the cause of damage when reliable ground information was lacking. b. When, as often happened, interrogation brought out conflicting statements, photographs were used to help establish the validity of one or the other of the statements. c. Photographs were used to determine routes of travel and for orientation in the field. d. Firebreaks in existence before the attack were plotted, and isolated areas of damage were located from aerial photographs. 3. Use of Photographs in Facilitating Area Damage Assessment. It is often impossible or in- advisable for a ground survey to complete a de- tailed study of the entire damaged area. In such instances a comprehensive damage analysis done from good quality photographs by a competent interpreter will accurately indicate the extent and relative degree of damage. In order to establish the degree of damage in more detail, spot checks can be made throughout the area. 4. Reconvmendations for Use of Photographic Intelligence, a. Preliminary to going into the field, the photographic interpreter accompanying the survey should be made familiar with its objec- tives and the expected procedures to be used in making the studies, so that he may provide the unit with all the necessary photographic aids and acquaint members of the unit with their use. b. The nature of the survey will dictate what particular items the interpreter should furnish, but the following minimum list should be applicable in almost any case, (1) An adequate supply of large-scale mosaics of the area from the latest and best available cover. These mosaics can be used for office work- sheets, indexing maps, and briefing charts. (2) An adequate supply of smaller-scale mosaics from the latest cover. These should be of such a size that they can be carried into the field as in- dividual orientation guides, maps, or worksheets. (3) If a grid system has been established before going into the field, this grid should be laid on a controlled mosaic, and other mosaics and photo- graphs referenced to it. (4) At least two sets each of the best quality pre-attack, the earliest post-attack, and all good quality post-attack cover, (5) All pertinent photographic intelligence documents on the area concerned. (6) All necessary personal interpretation equip- ment. SECRET 336 UNITED STATES STRATEGIC BOMBING SURVEY LIST OF REPORTS The following is a bibliography of reports resulting from the Survey’s studies of the European and Pacific wars. Those reports marked with an asterisk (*) may be pur- chased from the Superintendent of Documents at the Government Printing Office, Washington, D. C. European War OFFICE OF THE CHAIRMAN *1 The United States Strategic Bombing Survey: Sum- mary Report (European War) *2 The United States Strategic Bombing Survey: Over- all Report (European War) *3 The Effects of Strategic Bombing on the German War Economy AIRCRAFT DIVISION (By Division and Branch) *4 Aircraft Division Industry Report 5 Inspection Visits to Various Targets (Special Report) Airframes Branch 6 Junkers Aircraft and Aero Engine Works, Dessau, Germany 7 Erla Maschinenwerke GmbH, Heiterblick, Ger- many 8 A T G Maschinenbau, G m b H, Leipzig (Mockau), Germany 9 Gothaer Waggonfabrik, A G, Gotha, Germany 10 Focke Wulf Aircraft Plant, Bremen, Germany 1 Over-all Report Part A Part B Appendices I, II, III 12 Dornier Works, Friedrichshafen & Munich, Germany 13 Gerhard Fieseler Werke GmbH, Kassel, Germany 14 Wiener Neustaedter Flugzeugwerke, Wiener Neu- stadt, Austria Aero Engines Branch 15 Bussing NAG Flugmotorenwerke GmbH, Bruns- wick, Germany 16 Mittel-Deutsche Motorenwerke GmbH, Taucha, German}7 17 Bavarian Motor Works Inc, Eisenach & Durrerhof, Germany 18 Bayerische Motorenwerke A G (BMW) Munich, Germany 19 Henschel Flugmotorenwerke, Kassel, Germany Light Metal Branch 20 Light Metals Industry (Tart I,Aluminum of Germany [Part II, Magnesium 21 Vereinigte Deutsche Metallwerke, Hildesheim, Ger- many 22 Metallgussgesellschaft G m b H, Leipzig, Germany 23 Aluminiumwerk GmbH, Plant No. 2, Bitterfeld, Germany 24 Gebrueder Giulini GmbH, Ludw igshafen, Germany 25 Luftschiffbau Zeppelin G m b H, Friedrichshafen on Bodensee, Germany 26 Wieland Werke A G, Ulm, Germany 27 Rudolph Rautenbach Leichmetallgiessereien, Solin- gen, Germany 28 Lippewerke Vereinigte Aluminiumwerke A G, Lunen, Germany 29 Vereinigte Deutsche Metallweike, Heddernheim, Germany 30 Duerener Metallwerke A G, Duren Wittenau-Berlin & Waren, Germany AREA STUDIES DIVISION *31 Area Studies Division Report 32 A Detailed Study of the Effects of Area Bombing on Hamburg 33 A Detailed Study of the Effects of Area Bombing on Wuppertal 34 A Detailed Study of the Effects of Area Bombing on Dusseldorf 35 A Detailed Study of the Effects of Area Bombing on Solingen 36 A Detailed Study of the Effects of Area Bombing on Remscheid 37 A Detailed Study of the Effects of Aiea Bombing on Darmstadt 38 A Detailed Study of the Effects of Area Bombing on Lubeck 39 A Brief Study of the Effects of Area Bombing on Berlin, Augsburg, Bochum, Leipzig, Hagen, Dort- mund, Oberhausen, Schweinfurt, and Bremen CIVILIAN DEFENSE DIVISION *40 Civilian Defense Division—Final Report 41 Cologne Field Report 42 Bonn Field Report 43 Hanover Field Report 44 Hamburg Field Report—Vol I, Text; Vol II, Exhibits 45 Bad Oldesloe Field Report 46 Augsburg Field Report 47 Reception Areas in Bavaria, Germany EQUIPMENT DIVISION Electrical Branch *48 German Electrical Equipment Industry Report 49 Brown Boveri et Cie, Mannheim Kafertal, Germany Optical and Precision Instrument Branch *50 Optical and Precision Instrument Industry Report 337 Abrasives Branch *51 The German Abrasive Industry 52 Mayer and Schmidt, Offenbach on Main, Germany Anti-Friction Branch *53 The German Anti-Friction Bearings Industry Machine Tools Branch *54 Machine Tools & Machinery as Capital Equipment *55 Machine Tool Industry in Germany 56 Herman Kolb Co, Cologne, Germany 57 Collet and Engelhard, Offenbach, Germany 58 Naxos Union, Frankfort on Main, Germany MILITARY ANALYSIS DIVISION 59 The Defeat of the German Air Force 60 V-Weapons (Crossbow) Campaign 61 Air Force Rate of Operation 62 Weather Factors in Combat Bombardment Opera- tions in the European Theatre 63 Bombing Accuracy, USAAF Heavy and Medium Bombers in the ETO 64 Description of RAF Bombing. 64a The Impact of the Allied Air Effort on German Logistics MORALE DIVISION *64b The Effects of Strategic Bombing on German Morale (Vol I & Vol II) Medical Branch *65 The Effect of Bombing on Health and Medical Care in Germany MUNITIONS DIVISION Heavy Industry Branch *66 The Coking Industry Report on Germany 67 Coking Plant Report No. 1, Sections A, B, C, & D 68 Gutehoffnungshuette, Oberhausen, Germany 69 Friedrich-Alfred Huette, Rheinhausen, Germany 70 Neunkirchen Eisenwerke A G, Neunkirchen, Ger- many 71 Reichswerke Hermann Goering A G, Hallendorf, Germany 72 August Thyssen Huette A G, Hamborn, Germany 73 Friedrich Krupp A G, Borbeck Plant, Essen, Ger- many 74 Dortmund Hoerder Huettenverein, A G, Dortmund, Germany 75 Hoesch A G, Dortmund, Germany 76 Bochumer Verein fuer Gusstahlfabrikation A G, Bochum, Germany Motor Vehicles and Tanks Branch *77 German Motor Vehicles Industry Report *78 Tank Industry Report 79 Daimler Benz A G, Unterturkheim, Germany 80 Renault Motor Vehicles Plant, Billancourt, Paris 81 Adam Opel, Russelsheim, Germany 82 Daimler Benz-Gaggenau Works, Gaggenau, Germany 83 Maschinenfabrik Augsburg-Nurnberg, Nurnberg, Germany 84 Auto Union A G, Chemnitz and Zwickau, Germany 85 Henschel & Sohn, Kassel, Germany 86 Maybach Motor Works, Friedrichshafen, Germany 87 Voigtlander, Maschinenfabrik A G, PLauen, Ger- many 88 Volkswagenwerke, Fallersleben, Germany 89 Bussing NAG, Brunswick, Germany 90 Muehlenbau Industrie A G (Miag) Brunswick, Ger- many 91 Friedrich Krupp Grusonwerke, Magdeburg, Germany Submarine Branch 92 German Submarine Industry Report 93 Maschinenfabrik Augsburg-Nurnberg A G, Augs- burg, Germany 94 Blohm and Voss Shipyards, Hamburg, Germany 95 Deutschewerke A. G, Kiel, German}' 96 Deutsche Schiff und Maschinenbau, Bremen, Ger- many 97 Friedrich Krupp Germaniawerft, Kiel, Germany 98 Howaldtswerke A G, Hamburg, Germany 99 Submarine Assembly Shelter, Targe, Germany 100 Bremer Vulkan, Vegesack, Germany Ordnance Branch *101 Ordnance Industry Report 102 Friedrich Krupp Grusonwerke A G, Magdeburg, Germany 103 Bochumer Verein fuer Gusstahlfabrikation A G, Bochum, Germany 104 Henschel & Sohn, Kassel, Germany 105 Rheinmetall-Borsig, Dusseldorf, Germany 106 Hermann Goering VVerke, Braunschweig, Hallendorf, Germany 107 Hannoverische Maschinenbau, Hanover, Germany 108 Gusstahlfabrik Friedrich Krupp, Essen, Germany OIL DIVISION *109 Oil Division, Final Report *110 Oil Division, Final Report, Appendix *111 Powder, Explosives, Special Rockets and Jet Pro- pellants, War Gases and Smoke Acid (Ministerial Report #1) 112 Underground and Dispersal Plants in Greater Ger- many 113 The German Oil Industry, Ministerial Report Team 78 114 Ministerial Report on Chemicals Oil Branch 115 Ammoniakwerke Merseburg G m b H, Leuna, Ger- many-—2 Appendices 116 Braunkohle Benzin A G, Zeitz and Bohlen, Germany Wintershall A G, Leutzkendorf, Germany 117 Ludwigshafen-Oppau Works of 1 G Farbenindustrie A G, Ludwigshafen, Germany 118 Ruhroel Hydrogenation Plant, Bottrop-Boy, Ger- many, Vol I, Vol II 119 Rhenania Ossag Mineraloelwerke A G, Harburg Refinery, Hamburg, Germany 120 Rhenania Ossag Mineraloelwerke A G, Grasbrook Refinery, Hamburg, Germany 121 Rhenania Ossag Mineraloelwerke A G, Wilhelmsburg Refinery, Hamburg, Germany 122 Gewerkschaft Victor, Castrop-Rauxel, Germany, Vol I & Vol II 123 Europaeische Tanklager und Transport A G, Ham- burg, Germany 124 Ebano Asphalt Werke A G, Harburg Refinery, Ham- burg, Germany 125 Meerbeck Rheinpreussen Synthetic Oil Plant—Vol I & Vol II Rubber Branch 126 Deutsche Dunlop Gummi Co., Hanau on Main, Germany 127 Continental Gummiwerke, Hanover. Germany 128 Huels Synthetic Rubber Plant 129 Ministerial Report on German Rubber Industry 338 Propellants Branch 130 Elektrochemischewerke, Munich, Germany 131 Schoenebeck Explosive Plant, Lignose Sprengstoff Werke GmbH, Bad Salzemen, Germany 132 Plants of Dynamit A G, Vormal, Alfred Nobel & Co, Troisdorf, Clausthal, Drummel and Duneberg, Germany 133 Deutsche Sprengchemie GmbH, Kraiburg, Ger- many OVER-ALL ECONOMIC EFFECTS DIVISION 134 Over-all Economic Effects Division Report Gross National Product 1 Special papers Kriegseilberichte 1 which together Hermann Goering Works f comprise the Food and Agriculture J above report 134a Industrial Sales Output and Productivity PHYSICAL DAMAGE DIVISION 134b Physical Damage Division Report (ETO) 135 Villacoublay Airdrome, Paris, France 136 Railroad Repair Yards, Malines, Belgium 137 Railroad Repair Yards, Louvain, Belgium 138 Railroad Repair Yards, Hasselt, Belgium 139 Railroad Repair Yards, Namur, Belgium 140 Submarine Pens, Brest, France 141 Powder Plant, Angouleme, France 142 Powder Plant, Bergerac, France 143 Coking Plants, Montigny & Liege, Belgium 144 Fort St. Blaise Verdun Group, Metz, France 145 Gnome et Rhone, Limoges, France 146 Michelin Tire Factory, Clermont-Ferrand, France 147 Gnome et Rhone Aero Engine Factory, Le Mans, France 148 Kugelfischer Bearing Ball Plant, Ebelsbach, Ger- many 149 Louis Breguet Aircraft Plant, Toulouse, France 150 S. N. C. A. S. E. Aircraft Plant, Toulouse, France 151 A. I. A. Aircraft Plant, Toulouse, France 152 V-Weapons in London 153 City Area of Krefeld 154 Public Air Raid Shelters in Germany 155 Goldenberg Thermal Electric Power Station, Knap- sack, Germany 156 Brauweiler Transformer & Switching Station, Brau- weiler, Germany 157 Storage Depot, Nahbollenbach, Germany 158 Railway and Road Bridge, Bad Munster, Germany 159 Railway Bridge, Eller, Germany 160 Gustloff-Werke Weimar, Weimar, Germany 161 Henschell & Sohn GmbH, Kassel, Germany 162 Area Survey at Pirmasens, Germany 163 Hanomag, Hanover, Germany 164 MAN Werke Augsburg, Augsburg, Germany 165 Friedrich Krupp A G, Essen, Germany 166 Erla Maschinenwerke, GmbH, Heiterblick, Ger- many 167 A T G Maschinenbau GmbH, Mockau, Germany 168 Erla Maschinenwerke GmbH, Mockau, Germany 169 Bayerische Motorenwerke, Durrerhof, Germany 170 Mittel-Deutsche Motorenwerke GmbH, Taucha, Germany 171 Submarine Pens Deutsche-Werft, Hamburg, Ger- many 172 Multi-Storied Structures, Hamburg, Germany 173 Continental Gummiwerke, Hanover, Germany 174 Kassel Marshalling Yards, Kassel, Germany 175 Ammoniawerke, Merseburg, Leuna, Germany 176 Brown Boveri et Cie, Mannheim, Kafertal, Germany 177 Adam Opel A G, Russelsheim, Germany 178 Daimler-Benz A G, Unterturkheim, Germany 179 Valentin Submarine Assembly, Farge, Germany 180 Volkswaggonwerke, Fallersleben, Germany 181 Railway Viaduct at Bielefeld, Germany 182 Ship Yards Howaldtswerke, Hamburg, Germany 183 Blohm and Voss Shipyards, Hamburg, Germany 184 Daimler-Benz A G, Mannheim, Germany 185 Synthetic Oil Plant, Meerbeck-Hamburg, Germany 186 Gewerkschaft Victor, Castrop-Rauxel, Germany 187 Klockner Humboldt Deutz, Ulm, Germany 188 Ruhroel Hydrogenation Plant, Bottrop-Boy Ger- many 189 Neukirchen Eisenwerke A G, Neukirchen, Germany 190 Railway Viaduct at Altenbecken, Germany 191 Railway Viaduct at Arnsburg, Germany 192 Deurag-Nerag Refineries, Misburg, Germany 193 Fire Raids on German Cities 194 I G Farbenindustrie, Ludwigshafen, Germany, Vol I & Vol II 195 Roundhouse in Marshalling Yard, Ulm, Germany 196 I G Farbenindustrie, Leverkusen, Germany 197 Chemische-Werke, Heuls, Germany 198 Gremberg Marshalling Yard, Gremberg, Germany 199 Locomotive Shops and Bridges at Hamm, Germany TRANSPORTATION DIVISION *200 The Effects of Strategic Bombing on Germany Trans- portation 201 Rail Operations Over the Brenner Pass 202 Effects of Bombing on Railroad Installations in Regensburg, Nurnberg and Munich Divisions. 203 German Locomotive Industry During the War 204 German Military Railroad Traffic UTILITIES DIVISION *205 German Electric Utilities Industry Report 206 1 to 10 in Vol I “Utilities Division Plant Reports” 207 11 to 20 in Vol II “Utilities Division Plant Reports” 208 21 Rheinische-Westfalische Elektrizitaetswerk A G Pacific War OFFICE OF THE CHAIRMAN *1 Summary Report (Pacific War) *2 Japan’s Struggle to End the War *3 The Effects of Atomic Bombs on Hiroshima and Nagasaki CIVILIAN STUDIES Civilian Defense Division 4 Field Report Covering Air Raid Protection and Allied Subjects, Tokyo, Japan 5 Field Report Covering Air Raid Protection and Allied Subjects, Nagasaki, Japan *6 Field Report Covering Air Raid Protection and Allied Subjects, Kyoto, Japan 7 Field Report Covering Air Raid Protection and Allied Subjects, Kobe, Japan 8 Field Report Covering Air Raid Protection and Allied Subjects, Osaka, Japan 9 Field Report Covering Air Raid Protection and Allied Subjects, Hiroshima, Japan—No. 1 *10 Summary Report Covering Air Raid Protection and Allied Subjects in Japan *11 Final Report Covering Air Raid Protection and Allied Subjects in Japan Medical Division *12 The Effects of Bombing on Health and Medical Serv- ices in Japan *13 The Effects of Atomic Bombs on Health and Medical Services in Hiroshima and Nagasaki Morale Division *14 The Effects of Strategic Bombing on Japanese Morale 339 ECONOMIC STUDIES Aircraft Division *15 The Japanese Aircraft Industry *16 Mitsubishi Heavy Industries, Ltd. Corporation Report No. I (Mitsubishi Jukogyo KK) (Airframes & Engines) *17 Nakajima Aircraft Company, Ltd. Corporation Report No. II (Nakajima Hikoki KK) (Airframes & Engines) *18 Kawanishi Aircraft Company Corporation Report No. Ill (Kawanishi Kokuki Kabushiki Kaisha) (Airframes) *19 Kawasaki Aircraft Industries Company, Inc. Corporation Report No. IV (Kawasaki Kokuki Kogyo Kabushiki Kaisha) (Airframes & Engines) *20 Aichi Aircraft Company Corporation Report No. V (Aichi Kokuki KK) (Airframes & Engines) *21 Sumitomo Metal Industries, Propeller Division Corporation Report No. VI (Sumitomo Kinzoku Kogyo KK, Puropera Seizosho) (Propellers) *22 Hitachi Aircraft Company Corporation Report No. VII (Hitachi Kokuki KK) (Airframes & Engines) *23 Japan International Air Industries, Ltd. Corporation Report No. VIII (Nippon Kokusai Koku Kogyo KK) (Airframes) *24 Japan Musical Instrument Manufacturing Company Corporation Report No. IX (Nippon Gakki Seizo KK) (Propellers) *25 Tachikawa Aircraft Company Corporation Report No. X (Tachikawa Hikoki KK) (Airframes) *26 Fuki Airplane Company Corporation Report No. XI (Fuki Hikoki KK) (Airframes) *27 Showa Airplane Company Corporation Report No. XII (Showa Hikoki Kogyo KK) (Airframes) *28 Ishikawajima Aircraft Industries Company, Ltd. Corporation Report No. XIII (Ishikawajima Koku Kogyo Kabushiki (Kaisha) (Engines) *29 Nippon Airplane Company Corporation Report No. XIV (Nippon Hikoki KK) (Airframes) *30 Kyushu Airplane Company Corporation Report No. XV (Kyushu Hikoki KK) (Airframes) *31 Shoda Engineering Company Corporation Report No. XVI (Shoda Seisakujo) (Components) *32 Mitaka Aircraft Industries Corporation Report No. XVII (Mitaka Koku Kogyo Kabushiki Kaisha) (Components) *33 Nissan Automobile Company Corporation Report No. XVIII (Nissan Jidosha KK) (Engines) *34 Army Air Arsenal & Navy Air Depots Corporation Report No. XIX (Airframes and Engines) *35 Japan Aircraft Underground Report No. XX Basic Materials Division *36 Coal and Metals in Japan’s War Economy Capital Goods, Equipment and Construction Division *37 The Japanese Construction Industry *38 Japanese Electrical Equipment *39 The Japanese Machine Building Industry Electric Power Division *40 The Electric Power Industry of Japan *41 The Electric Power Industry of Japan (Plant Re- ports) Manpower, Food and Civilian Supplies Division *42 The Japanese Wartime Standard of Living and Utili- zation of Manpower Military Supplies Division *43 Japanese War Production Industries *44 Japanese Naval Ordnance 45 Japanese Army Ordnance *46 Japanese Naval Shipbuilding *47 Japanese Motor Vehicle Industry *48 Japanese Merchant Shipbuilding Oil and Chemical Division 49 Chemicals in Japan’s War 50 Chemicals in Japan’s War—Appendix 51 Oil in Japan’s War 52 Oil in Japan’s War—Appendix Over-all Economic Effects Division *53 The Effects of Strategic Bombing on Japan’s War Economy (Including Appendix A: U. S. Economic Intelligence on Japan—Analysis and Comparison; Appendix B: Gross National Product on Japan and Its Components; Appendix C: Statistical Sources) Transportation Division *54 The War Against Japanese Transportation, 1941- 1945 Urban Areas Division *55 Effects of Air Attack on Japanese Urban Economy (Summary Report) *56 Effects of Air Attack on Urban Complex Tokyo- Kawasaki-Yokohama *57 Effects of Air Attack on the City of Nagoya *58 Effects of Air Attack on Osaka-Kobe-Kyoto 59 Effects of Air Attack on the City of Nagasaki 60 Effects of Air Attack on the City of Hiroshima 340 MILITARY STUDIES Military Analysis Division 61 Air Forces Allied with the United States in the War Against Japan 62 Japanese Air Power 63 Japanese Air Weapons and Tactics 64 The Effect of Air Action on Japanese Ground Army Logistics 65 Employment of Forces Under the Southwest Pacific Command 66 The Strategic Air Operations of Very Heavy Bom- bardment in the War Against Japan (Twentieth Air Force) 67 Air Operations in China, Burma, India—World War II 68 The Air Transport Command in the War Against Japan 69 The Thirteenth Air Force in the War Against Japan 70 The Seventh and Eleventh Air Forces in the War Against Japan 71 The Fifth Air Force in the War Against Japan Naval Analysis Division *72 The Interrogations of Japanese Officials )VoIs. I and II) *73 Campaigns of the Pacific War *74 The Reduction of Wake Island *75 The Allied Campaign Against Rabaul 76 The American Campaign Against Wotje, Maloelap, Mille, and Jaluit (Vols. I, II and III) *77 The Reduction of Truk 78 The Offensive Mine Laying Campaign Against Japan 79 Report of Ships Bombardment Survey Party—Fore- word, Introduction, Conclusions, and General Summary 80 Report of Ships Bombardment Survey Party (En- closure A), Kamaishi Area 81 Report of Ships Bombardment Survey Party (En- closure B), Hamamatsu Area 82 Report of Ships Bombardment Survey Party (En- closure C), Hitachi Area 83 Report of Ships Bombardment Survey Party (En- closure D), Hakodate Area 84 Report of Ships Bombardment Survey Party (En- closure E), Muroran Area 85 Report of Ships Bombardment Survey Party (En- closure F), Shimizu Area 86 Report of Ships Bombardment Survey Party (En- closures G and H), Shionomi-Saki and Nojima- Saki Areas 87 Report of Ships Bombardment Survey Party (En- closure I), Comments and Data on Effectiveness of Ammunition 88 Report of Ships Bombardment Survey Party (En- closure J), Comments and Data on Accuracy of Firing 89 Reports of Ships Bombardment Survey Party (En- closure K), Effects of Surface Bombardments on Japanese War Potential Physical Damage Division 90 Effect of the Incendiary Bomb Attacks on Japan (a Report on Eight Cities) 91 The Effects of the Ten Thousand Pound Bomb on Japanese Targets (a Report on Nine Incidents) 92 Effects of the Atomic Bomb on Hiroshima, Japan 93 Effects of the Atomic Bomb on Nagasaki, Japan 94 Effects of the Four Thousand Pound Bomb on Japa- nese Targets (a Report on Five Incidents) 95 Effects of Two Thousand, One Thousand, and Five Hundred Pound Bombs on Japanese Targets (a Report on Eight Incidents) 96 A Report on Physical Damage in Japan (Summary Report) G-2 Division 97 Japanese Military and Naval Intelligence 98 Evaluation of Photographic Intelligence in the Japa- nese Homeland, Part I, Comprehensive Report 99 Evaluation of Photographic Intelligence in the Japa- nese Homeland, Part II, Airfields 100 Evaluation of Photographic Intelligence in the Japa- nese Homeland, Part III, Computed Bomb Plotting 101 Evaluation of Photographic Intelligence in the Japa- nese Homeland, Part IV, Urban Area Analysis 102 Evaluation of Photographic Intelligence in the Japa- nese Homeland, Part V, Camouflage 103 Evaluation of Photographic Intelligence in the Japa- nese Homeland, Part VI, Shipping 104 Evaluation of Photographic Intelligence in the Japa- nese Homeland, Part VII, Electronics 105 Evaluation of Photographic Intelligence in the Japa- nese Homeland, Part VIII, Beach Intelligence *106 Evaluation of Photographic Intelligence in the Japa- nese Homeland, Part IX, Artillery *107 Evaluation of Photographic Intelligence in the Japa- nese Homeland, Part X, Roads and Railroads 108 Evaluation of Photographic Intelligence in the Japa- nese Homeland, Part XI, Industrial Analysis 341